• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.371-379
• /
• 2017

This study was aimed to investigate the contribution of tree plantation, tree breeding and soil erosion control techniques developed during Saemaul Undong periods to the successful forest rehabilitation in the Republic of Korea. We surveyed a various literature of forest journals and had deep interview with forest experts who were actively involved in the forest rehabilitation projects. In the Republic of Korea, the forest rehabilitation was started with Saemaul Undong in 1970s and carried out to make the country green and to restore degraded forest lands by supports of tree plantation, tree breeding and soil erosion control techniques. Various techniques such as seed storage, seedling production, mass vegetative propagation (grafting and cutting) and special planting at denuded land or slash and burn site were developed for tree plantation. All techniques developed for the forest rehabilitation were connected with Saemaul Undong which caused active participation of local community people. Therefore, the development of tree plantation, tree breeding and soil erosion control skills had great impact on the job creation and income sources of local dwellers. It would be an applicable case to developing countries suffering with deforestation and forest degradation if the Korean skills developed for forest rehabilitation could be transferred.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.8-17
• /
• 2003

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear Power Plant. In Pipes of energy Plants, sometimes, the local wall thinning may result from severe erosion-corrosion (E/C) damage. However, the effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. In this paper, the monotonic bending tests were performed of full-scale carbon steel pipes with local wall thinning. A monotonic bending load was applied to straight pipe specimens by four-point loading at ambient temperature without internal pressure. From the tests, fracture behaviors and fracture strength of locally thinned pipe were manifested systematically. The observed failure modes were divided into four types; ovalization. crack initiation/growth after ovalization, local buckling and crack initiation/growth after local buckling. Also, the strength and the allowable limit of piping system with local wall thinning were evaluated.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.419-431
• /
• 2017

The forest slopes cause substantial local changes in soil properties and an increase in soil erosion after extreme rainstorms. The high soil erosion rates on forest slopes need the effective use of growing media to control the soil runoff. Therefore, we prepared six different lignocellulosic growing media such as peat, perlite, and wood meal as the base materials and carboxymethyl cellulose (CMC), glucomannan, starch, old corrugated containerboard, and computer printout as the additional materials for the prevention of simulated rainfall-induced runoff. The growing media containing old corrugated containerboard efficiently reduced the percentage of soil runoff; however, it could not completely cushion the influence of crust. The best results for plant growth, except in the leaf area, were also obtained with the growing media containing old corrugated containerboard, suggesting an interesting way of paper recycling and an economic benefit for plant or crop growth in forest slope.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.285-291
• /
• 2009

Water is a strategic resource for Singapore due to its small land mass and more than half of the mainland serves as catchment for raw water, including construction sites. Construction site typically involves earthworks and in conjunction with the frequent and intense rainstorm in Singapore, produce runoff of high turbidity due to suspended sediments. The resulting high concentration of suspended sediment in construction site runoff very often leads to aesthetically unpleasant reservoirs and potentially increases the treatment cost of raw water. To mitigate this, the local standard requires the discharged concentration of total suspended solids of construction runoff leaving a construction site to be less than 50mg/l which is a very high standard. This paper will present, examine and discuss particular issues and practices of Singapore's construction industry in meeting this requirement. The focus will be on two areas: Government lead initiatives and industry practices. How the government agencies worked together with the industry professionals to develop a system to ensure meeting of the standard is discussed. In addition, the types of industry practices, including various Best Management Practice to reduce erosion in construction sites and implement effective sedimentation on construction sites are examined.

• Journal of the Korean association of regional geographers
• /
• v.19 no.1
• /
• pp.147-161
• /
• 2013

This paper aims to examine the background, process, and characteristics of the territorial reform of local governments in West Germany (the Federal Republic of Germany) in the 1960s and 70s. During this period the territorial structure and function of municipality (Gemeinde), county (Kreis) and county-free town (Kreisfreie Stadt) as local governments were fundamentally reformed. The territorial reform of local governments paid special attention to merge the small-sized municipalities and to create the joint authorities in order to build the system of central localities. There had been criticism on the uniform boundary delimitation, confusion of regional identity, erosion of local autonomy and emphasis on the regional planning. But the territorial reform of the period has contributed to improve the performance of public administration and to strengthen the service delivery and planning capacity.

• Journal of the Korean Geographical Society
• /
• v.38 no.3
• /
• pp.389-399
• /
• 2003

CRN (Cosmogenic radionuclide) methodology has been a versatile tool applicable to a wide range of geomorphology. This study was underiaken to ascertain the rate of erosion and exposure age of mountain-top detritus (tors and block streams) on Mt. Maneo by employing the concentrations of in-situ produced cosmogenic $^{10}$ Be and $^{26}$ Al from bedrock surfaces that are exposed to cosmic rays. The results suggest that tors on the summit were positioned here during the glacial period but no later than 65ka and block streams have been stabilized also since the last glacial period but no later than 38ka. The tors on the summit have been eroded at a slower rate (9m/Ma) than blocks on the hillslope (15m/Ma) since the initial abrupt exposure of each landform to cosmic rays, suggesting that there is a slight difference in the rate of erosion between the summit and the hillslope, and that the local relief between the two areas has been increased. When the $^{26}$ Al/$^{10}$ Be-$^{10}$ Be concentrations from samples are plotted in Lal's steady-state erosion island, one sample (from a for) has complex exposure histories, which can be explained by the occurrence of multiple chipping event of 5cm to 60cm in length on the surface of the rock.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.9
• /
• pp.1167-1174
• /
• 1999

In this paper, we present a new technique for the local decomposition of convex structuring elements for morphological image processing. Local decomposition of a structuring element consists of local structuring elements, in which each structuring element consists of a subset of origin pixel and its eight neighbors. Generally, local decomposition of a structuring element reduces the amount of computation required for morphological operations with the structuring element. A unique feature of our approach is the use of linear integer programming technique to determine optimal local decomposition that guarantees the minimal amount of computation. We defined a digital convex polygon, which, in turn, is defined as a convex structuring element, and formulated the necessary and sufficient conditions to decompose a digital convex polygon into a set of basis digital convex polygons. We used a set of linear equations to represent the relationships between the edges and the positions of the original convex polygon, and those of the basis convex polygons. Further. a cost function was used represent the total processing time required for computation of dilation/erosion with the structuring elements in a decomposition. Then integer linear programming was used to seek an optimal local decomposition, that satisfies the linear equations and simultaneously minimize the cost function.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.533-542
• /
• 2006

In order to assess the integrity of pipes with local thinning area, the plastic strain as well as the elastic strain at the root of thinned region are required particularly when fluctuating load is applied to the pipe. For estimating elastic-plastic strain at local wall thinning area in a straight pipe under tensile load, an estimation model with idealized fully circumferential constant depth wall thinning area is proposed. Based on the compatibility and equilibrium equations a nonlinear estimation equation, from which local elastic-plastic strain can be determined as a function of pipe/defect geometry, material and the applied strain was derived. Estimation results are compared with those from detailed elastic-plastic finite element analysis, which shows good agreements. Noting that practical wall thinning in nuclear piping has not only a circular shape but also a finite circumferential length, the proposed solution for the ideal geometry is extended based on two-dimensional and three-dimensional numerical analysis of pipes with circular wall thinning.

• Journal of Wetlands Research
• /
• v.19 no.2
• /
• pp.181-192
• /
• 2017

Analysis using a numerical model is important to understand the sediment transport mechanism associated with erosion and sedimentation near weirs and other hydraulic structures within riverine systems. The local riverbed change near a hydraulic structure (Gangjeong-Goryong multi-function weir in the Nakdong river) was analyzed in order to examine the effect of hydraulic structures on local bed change. A 2D numerical model (CCHE-2D) was employed to simulate the sedimentation and erosion over a reach (25 km) including the weir. For the calibration and verification of the model, rainfall data from a real event (Typoon 'Ewiniar' in 2006) were used for flow and stage simulation. And the simulated results show a good agreement with the observed data for the whole domain. From the result, it was found that the installation and operation of the weir could aggravate bed changes by typhoon between movable weirs, and which resulted in redistribution of sediment.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.320-325
• /
• 2004

Fracture behaviors and strength of pipes with local wall thinning are very important Jar the integrity of energy plants. In pipes of energy plants, sometimes, the local wall thinning may result from severe erosion-corrosion damage. Recently, the effects of local wall thinning on strength and fracture behaviors of piping system have been well studied. In this paper, the elasto-plastic analysis is performed by FE code ANSIS. We evaluated the failure mode, fracture strength and fracture behavior from FE analysis.