• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.618-630
• /
• 1999

An analytical model that includes the steam condensation effect has been derived and a parametric study has been performed. In addition, a series of experiments were performed and a total of 34 experimental data for the onset of CCFL in nearly horizontal countercurrent two-phase How have been obtained for various flow rates of water. Comparisons of the present CCFL data with slug formation models show that the agreement between the present as well as the existing model and the data is about the same. However, the deviation between the Taitel and Dukler's model predictions and the data is the largest when if j$_{f}$<0.04 m/s. A parametric study of the effect of the steam condensation using the present model shows that, when all local conditions are similar, the model predicted local gas velocities that cause the onset of flooding are slightly lower when condensation occurred. Based on the visual observation and the evaluation of the present work, it has been concluded that the criterion derived for the onset of slug flow can be directly used to predict the onset of inner flooding in nearly horizontal two-phase flow within the experimental ranges of the present work.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.35-40
• /
• 2007

Leak would happen because of the damage of high temperature and high-pressure valve in nuclear power plant. condition based prevention maintenance is essential by using the suitable method based on local condition. Energy loss prevention can prevent from an accurate test, Local actually and ability. The methods of test for high energy fluid leak at present are analysis of ${\Delta}T$, AE(Acoustic Emission) analysis, and thermal image. The result for test of secondary system in nuclear power plant Unit reveals that the AE occurred clearly in leakage situation, but thermal image didn't occur. It is identified that leak is occurred when the orifice located front and back of valve operates. It shows that making a impatient judgment by using the single method if it is leakage is containing uncertainty. So we think that using the Multi-Measuring method is more sound judgment than single-measuring method.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.12-17
• /
• 2015

In this study, the collapse characteristic of CFRP/Al compound square tube was investigated experimentally. The conclusions are as follows; The impact collapse characteristic of CFRP/Al compound square tube was found to be the most superior stacking conditions $[90^{\circ}]_8$. It showed that a very stable collapse mode was crushing. In the member with $[0_2{^{\circ}}/90_2{^{\circ}}]_s$ and $[90_2{^{\circ}}/0_2{^{\circ}}]_s$, stacking conditions, $0^{\circ}$ fibers were splayed to the external by laminar bending, while the $90^{\circ}$ fibers were held between the folds of the aluminum member by laminar bending, local buckling and transverse crack. In the member with $[45_2{^{\circ}}/45_2{^{\circ}}]_s$ stacking conditions, fibers were held between the folds of the aluminum member by local buckling and transverse crack.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2005년도 추계학술발표논문집
• /
• pp.45-53
• /
• 2005

A novel method for evaluating the anisotropy of the deterministic features in a stochastic 2D data is introduced. The ability of the wavelet transform for the identification of the abrupt discontinuities could be used to characterize the boundary of the deterministic area in a 2D stochastic data, such as flocs in paper structure. The one-dimensional wavelet transform with a small-scale range in MD and CD could quantify the amount of the edge in both directions, depending on the intensity of each floc. The flocs that are aligned in the MD direction result in a higher value of local wavelet energy in the CD direction. Therefore, the ratio of the total wavelet energy in CD and MD directions can be used as a new anisotropy index. This index is a measure of the floc-orientation and can provide an excellent tool to obtain the orientation distribution and the major oriented angle of flocs. Various simulated images and real stochastic data such as local gloss variation of printed image and formation image, have been tested and the results show this analysis method is very reliable to measure the anisotropy of the deterministic features.

• 한국식생활문화학회지
• /
• 제30권5호
• /
• pp.562-575
• /
• 2015

This study intends to discover stories and sensibilities connected with characteristics and symbols of the history and culture of Sangju to develop contents about the native foods of Sangju. 'General Jeong's Table', which supplied the energy and nutrition necessary for soldiers during war, is set with Jobap, Patipguk, Euneogui, Baechumoojeon, Kongnamulheojib, Patipnamul, and Munamulsileagideanjangmuchim. 'Sangjuseong retaking wartime food', as a kind of ready-to-eat meal, which stresses convenience above everything else, is composed of Konggarujumeokbap, Bbongipjuk, Gamjangajji, and Odigojgammodeumbagitteok for table setting. 'General Jeong's liquor table', which allowed the general to regain his energy or was set to entertain generals of allied forces in the Myeong Dynasty, is formed by Baeksuk, Gojgamssam, Kongjukjijim and Sangsurisul. Efficacies of food materials were analyzed in the Part of Drug Formula of the best-known medical book in Asia. Foods on 'General Jeong's Table' has health efficacies that protect the five viscera and maintain the spleen and stomach.

• 대한화학회지
• /
• 제33권5호
• /
• pp.538-544
• /
• 1989

1-(phenoxymethyl)benzotriazole(1)과 1-(thiophenoxymethyl)benzotriazole(2) 유도체중의 X 치환기가 전자를 끄는 세기(${\rho}<0$)와 methylene group의 인접 Y원자에 의한 local diamagnetic effect(Y=O(1)>S(2)), 그리고 용매의 극성파라미터($E_T$=Kcal/mol:acetone;42.2>chloroform;39.0)가 클수록 methylene group의 수소원자($H_m$)와 용매사이에 B-형의 수소결합성이 증가되었으며 (1)의 methylene group 에 대한 substituent chemical shift($CH_2-SCS$)에 미치는 자유 에너지 직선관계(LFER)의 조성은 아세톤 용액 중에서 장(F)(또는 유발(I))-효과 보다 공명(R)-효과가 더 크게 나타나는 용매 의존적인 경향이었다.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.372-377
• /
• 2017

We demonstrate that the local resonance of metamaterials can be tuned by the effects of organic thin films under photoexcitation. Tris (8-hydroxyquinolinato) aluminum ($Alq_3$) layers are deposited on metamaterial/silicon hybrid structures. By varying the thickness of the $Alq_3$ layer on the subwavelength scale, the resonant peak of the metamaterial becomes very adjustable, due to the effect of a thin dielectric substrate. In addition, under photoexcitation all the spectral peaks of the resonance shift to higher frequencies. This originates from the reduction of the capacitive response generated inside the gaps of split-ring resonators. The adjustability of the electromagnetic spectrum may be useful for developing optical systems requiring refractive-index engineering and active optical devices.

• 한국태양에너지학회 논문집
• /
• 제31권5호
• /
• pp.47-59
• /
• 2011

The purpose of this paper is to simulate the high ozone concentration in Shiwha Banwol indusrial complex. High pollution episodes (ozone alert) of this area are the results of geographical location and its air pollutants emission. This research has used meteorological model (RAMS) and photochemical air pollution Model (CIT model). As first step of the evaluate of this combined model system simulations are done in terms of meteorological characteristics like wind fields, PBL-height, etc.. Numerical simulations are carried out with real meteorological synoptic data on June. 24-25, 2010. In comparison with real measurement and another research the model reflects well local meteorological phenomena and shows the possibility to be utilized to analyse the pollutant dispersion over irregular terrain region. The high ozone concentration is deeply correlated to the ambient air temperature, wind speed and solar radiation. Local meteorological phenomena like sea-land breeze impact on horizontal dispersion of ozone. This analysis of meteorological characteristics can, in turn, help to predict their influences on air quality and to manage the high ozone episodes.

• 전자공학회논문지
• /
• 제53권1호
• /
• pp.145-152
• /
• 2016

전통적인 조명이 고효율 LED(Light Emitting Diode)로 빠르게 대체되고, 에너지 효율의 극대화를 위한 다양하고 효과적인 조명 제어 기술이 요구되고 있다. 본 논문에서는 LAN(Local Area Network)과 PAN(Personal Area Network) 기반의 유무선 통신기술을 이용하여 다양한 방법으로 LED 조명을 제어 할 수 있는 조명 제어 장치를 설계하고 구현한다. 구현된 장치는 조명 설치의 복잡한 배선 작업과 설치 작업 비용을 절감하고, 필요한 곳만 선택적으로 자동 또는 수동으로 조명을 제어할 수 있도록 제어 장치를 설계하여 전력 소비량을 최소화할 수 있다. 실험을 통해 개발된 LED 조명 제어 장치의 기능이 정상적으로 동작함을 확인하였다.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.29-43
• /
• 2017

This study investigates the blast resistance of fiber-reinforced cementitious composite (FRCC) panels, with fiber volume fractions of 2%, subjected to contact explosions using an emulsion explosive. A number of FRCC panels with five different fiber mixtures (i.e., micro polyvinyl alcohol fiber, micro polyethylene fiber, macro hooked-end steel fiber, micro polyvinyl alcohol fiber with macro hooked-end steel fiber, and micro polyethylene fiber with macro hooked-end steel fiber) were fabricated and tested. In addition, the blast resistance of plain panels (i.e., non-fiber-reinforced high strength concrete, and non-fiber-reinforced cementitious composites) were examined for comparison with those of the FRCC panels. The resistance of the panels to spall failure improved with the addition of micro synthetic fibers and/or macro hooked-end steel fibers as compared to those of the plain panels. The fracture energy of the FRCC panels was significantly higher than that of the plain panels, which reduced the local damage experienced by the FRCCs. The cracks on the back side of the micro synthetic fiber-reinforced panel due to contact explosions were greatly controlled compared to the macro hooked-end steel fiber-reinforced panel. However, the blast resistance of the macro hooked-end steel fiber-reinforced panel was improved by hybrid with micro synthetic fibers.