• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1258-1266
• /
• 2004

It is important to completely understand heat/mass transfer from a flat plate because it is a basic element of heat/mass transfer. In the present study, local heat/mass transfer coefficient is obtained for two flow conditions to investigate the effect of boundary layer using the naphthalene sublimation technique. Obtained local heat/mass transfer coefficient is converted to dimensionless parameters such as Sherwood number, Stanton number and Colburn j-factor. These also are compared with correlations of laminar and turbulent heat/mass transfer from a flat plate. According to experimental results, local Sherwood number and local Stanton number are in much better agreement with the correlation of turbulent region rather than laminar region, which means analogy between heat/mass transfer and momentum transfer is more suitable for turbulent boundary layer. But average Sherwood number and average Colburn j-factor representing analogy between heat/mass transfer and momentum transfer are consistent with the correlation of laminar boundary layer as well as turbulent boundary layer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.81-88
• /
• 2001

This study proposed an analytical method to evaluate a local allowable wall thickness (LAWT) for locally thinned pipe subjected to internal pressure and bending moment. In this method, the stresses in the thinned region were calculated by finite element analysis and plastic collapse was applied as a failure criterion of thinned pipe. Using this method, LAWT for a simplified thinned pipe was evaluated with variation in axial extent of thinned area, and it was compared with allowable wall thickness provided by previous pipe wall thickness criteria. The results showed that the LAWT was lower, about 50%, than that calculated by construction code or ASME Code N-597, and it was higher, about 2 times, than that estimated by evaluation model based on pipe experiments. In addition, LAWT was decreased with increasing axial extent of thinned area and saturated with further increase in axial extent. And, the variation in LAWT with axial extent of thinned area depended on type of load, especially a magnitude of bending moment, considering in the evaluation.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.2
• /
• pp.74-86
• /
• 2012

For the improvement of environmental comfort in the buildings with the blind control, the objective of this study is to prevent the direct glare caused by the daylight inlet. During the process of solar profile prediction, time are significant factors that may cause error and glare during the blind control. This research proposes and evaluates the correction and control method to minimize prediction error. For the local areas with different longitude and local standard meridian, error occurred in the process of the time conversion from local standard time to apparent solar time. In order to correct error in time conversion, apparent solar time should be recalculated after adjusting the day of year and the equation of time. To solve the problems by the potential time errors, control method is suggested to divide the control sections using the calibrated fitting-curve and this method is verified through simulations. The proposed correction and control method, which considered potential time errors by loop lop leap years, could solve the problems about direct glare caused by daylight inlet on the work-plane according to the prediction errors of solar profile. And also these methods could maximize daylight inlet and solar heat gain, because the blocked area on windows could be minimized.

• Journal of Ecology and Environment
• /
• v.38 no.2
• /
• pp.263-269
• /
• 2015

When we consider changes in agro-fishery systems instigated by environmental changes in islands, rise in sea levels, and natural disasters such as tsunamis, there is an urgent need to carry out initiatives to enhance life standard and conserve ecosystem in island and coastal regions. To protect the region's landscape from the effects of climate change, it is necessary to develop an integrated management system for ecosystem conservation, human settlements, and the local economy. This paper discusses the outline of a preliminary national plan for a sustainable island management system for remote (inhabited and uninhabited) islands in Korea. Two main ideas to enhance life standard are adapting to the natural environment by applying traditional knowledge and utilizing ecological resources of islands, i.e., improving the quality of life and creating added value. As a technique for improving the quality of life, the establishment of eco-villages based on energy-efficient passive houses and ecological welfare is suggested. Another technique for creating added value, the development of sea-farming islands that utilize islands' new recyclable energy is also proposed. Finally, the suggested ideas are discussed in relation to island ecotourism and carbon zero islands.

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.56-62
• /
• 2007

UWB(Ultra Wide Band) system can transmits information with low power but it can achieve high transmission rate using broad frequency bands. Using CR(Cognitive Radio) technology, we can use and share frequency efficiently without interfere to satellite communication system. However, passive characteristics of satellite receiver makes it hard to implement. This paper propose additional structure of satellite receiver which add amplifier and antenna to local oscillator. Proposing structure emits satellite receiver's local oscillator signal and UWB terminal detects it by energy detection. We can find out the possibility of co-existence of UWB system and satellite communication system through the simulation result.

• Korean Journal of Oriental Medicine
• /
• v.4 no.1 s.4
• /
• pp.47-62
• /
• 1998

We explicate the forming mechanism of Sasang constitution as the principle of energy distribution which is based on the evolutionary hypothesis. The result was obtained as follows: 1. The principle of form-image (形象) in oriental medicine can be explained with the relation between structure and function that a life acquires through the adaptation and evolution. 2. The Sung-jung (性情) in Sasang constitutional medicine can be explained as the strategy for survival or the pattern of adaptation by which an individual or a species lives in this world. 3. The forming mechanism of Sasang constitutional organic phase (臟局) can be explained as the principle of energy distribution which includes three hypothesis (hypothesis of limited resources, hypothesis of preference and hypothesis of effectiveness). 4. It is postulated that the local hemodynamics is one of the most important factors that determine the difference of Sasang constitutional organic function. 5. The relation of metabolic rate, local hemodynamics and thermo-metabolism is inseparable and it is the important point of forming mechanism of Sasang constitution and the diagnosis of pulse.

• Journal of Welding and Joining
• /
• v.7 no.2
• /
• pp.35-48
• /
• 1989

This study is concerned with a correlation of microstructure and local brittle zone (LBZ) in offshore structural steel welds. The influence of the LBZ on fracture toughness was investigated by means of simulated heat-affected zone (HAZ) tests as well as welded joint tests. Micromechanical processes involved in void and cleavage microcrack formation were also identified using notched round tensile tests and subsequent SEM observations. The LBZ in the HAZ of a multiphase welded joint is the interstitially reheated coarse grained HAZ, which is influenced by metallurgical factors such as effective grain size, the major matrix structure and the amount of high-carbon martensite-austenite (M-A) constituents. The experimental results indicate that Chirpy energy was found to scale monotonically with the amount of M-A constituents, confirming that the M-A constituent is the major microstructural factor controlling the HAZ toughness. In addition, voids and microcracks are observed to initiate at M-A constituents by the shear cracking process. Thus, the M-A constituent played an important role in initiating the voids and microcracks, and consequently caused brittle fracture.

• Korean Journal of Community Nutrition
• /
• v.12 no.2
• /
• pp.133-141
• /
• 2007

Minerals play important roles in biological processes. Hair mineral analysis has the advantages of conveniences in sampling and observing the profiles of multiple minerals simultaneously. The purpose of this study was to compare hair mineral contents between urban and local middle school students, and to find out the relation with nutrient intakes and clinical symptoms. Ten nutritional minerals and 7 environmental mineral contents were analyzed in the hair samples of 44 and 37 male students who resided in urban and local area, respectively. And their nutrient intake and clinical symptom score were estimated from questionnaire. The average age, height, and weight were 15.1 years, 168.4 cm, 56.8 kg in urban subjects and 15.4 years, 169.1 cm, 61.9 kg in local subjects, respectively. The residence types were apartment (63.6%) and small-sized apartment (22.7%) in urban subjects and apartment (51.4%) and house (37.8%) in local subjects. The primary water sources were purified water (38.3%), running water (18.2%) in urban subjects and purified water (32.4%), underground water (27.0%) in local subjects, respectively. Daily energy and nutrient intakes were not significantly different between two groups. Among the surveyed 17 clinical symptoms, the scores of constipation, cold, anxieties and total score of clinical symptoms in urban subjects were significantly love. than those in local subjects. Hair contents of Na, Mg, Ca, Cu, V Al, As were significantly higher, while U was lower in urban subjects compared to those in rural subjects. Hair contents of Ni and U were significantly correlated with food intake, and Cr, V, Al, Sb, As, U showed a correlation with energy intake. Hair Mg level showed significantly negative correlation with total clinical symptom score. In conclusion, hair mineral profile between urban and local students was significantly different. And some of these minerals were significantly correlated with food and nutrient intakes. Especially hair magnesium was significantly correlated with total clinical symptom score. Therefore, hair mineral levels would be needed for more systematic study elucidating potentiality as a useful clinical tool.

• Korean Journal of Remote Sensing
• /
• v.20 no.2
• /
• pp.103-116
• /
• 2004

The mesoscale atmospheric models to produce surface temperature can not generally consider the effect of the sloped terrain for direct solar radiation. These have not showed the regional difference of solar radiation and as a result, have made the big error in the local surface temperature. Therefore, we wished to represent the exact locality of surface temperature by considering the geometric properties of surface as well as the vegetated properties of surface. The purpose of the study is to produce local surface ground temperature in sloped terrain diagnostically using surface Energy Balance Model (EBM) with the use of GRID model in Geographic Information Systems (GIS). In this study, surface inhomogeneity over southeastern part of Korean peninsula are considered in estimation of the absorbed surface solar radiation in terms of the illumination angle, depending on topographical aspect and slope in GRID. Also, the properties of vegetated surface which the major components for the variability of surface temperature are considered in terms of NDVI. The results of our study show the locally changes in the surface ground temperature due to local ground aspect and slope effect and local properties of vegetated surface. The more detailed distribution of local surface temperature may drive the local circulation at lower atmospheric and it may explain better the real local circulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.278-288
• /
• 1998

An efficient and useful method to improve the local stress field in a displacement-formulated finite element solution has been proposed using the theory of conjugate approximations for a stress field and the Loubignac's iterative method for a displacement field. Validity of the proposed method has been tested through three test examples, to improve the stress field and displacement field in the whole domain and the local regions. As a result of analysis on the test examples, it is found that the stress field in the local regions are approximated to those in the whole domain within a few iterations which have satisfied the original finite element equilibrium equation. In addition, it is found that the local stress field are by far better approximated to the exact stress field than the displacement-based stress field with the reduction of the finite-element mesh-size.