• Journal of the Korean Solar Energy Society
• /
• v.37 no.6
• /
• pp.59-68
• /
• 2017

In accordance with the policy of local government, the large scale of wind farms have been installed in Jeju power system. However, The intermittent characteristics of wind power output may cause grid voltage and frequency variation, especially in weak power system. One of the solution to solve this problem is installation of Energy storage system (ESS). In this case, the ESS will regulate the active power generated from wind farm to mitigate fluctuation. Actually, the local government of Jeju island constructed ESS connected to Hangwon wind turbine in 2016. From this point, this paper analyzes requirement capacity of ESS to mitigate wind power fluctuation based on measured data from Hangwon wind turbine and ESS. The simulation results will be carried out by Matlab program.

• Nuclear Engineering and Technology
• /
• v.33 no.1
• /
• pp.93-101
• /
• 2001

The spacer grid is one of the main structural components in the fuel assembly, which supports the fuel rods, guides cooling water, and protects the system from an external impact load, such as earthquakes. Therefore, the mechanical and structural properties of the spacer grids must be extensively examined while designing them. In this paper, a numerical method for predicting the buckling strength of spacer grids is presented. Numerical analyses on the buckling behavior of the spacer grids are performed for a various array of sizes of the grids considering that the spacer grid is an assembled structure with thin-walled plates and imposing proper boundary conditions by nonlinear dynamic finite element method using ABAQUS/Explicit. Buckling tests on several numbers of specimens of the spacer grid were also carried out in order to compare the results between the test and the simulation result. The drop test is accomplished by dropping a carriage on the specimen at a pre-determined position. From this test, the specimens are buckled only at the uppermost and the lowermost layer among the multi-cells, which is similar to the local buckling at the weakest point of the grid structure. The simulated results also similarly predicted the local buckling phenomena and were found to give good correspondence with the experimental values for the thin-walled grid structures.

• Korean Journal of Organic Agriculture
• /
• v.18 no.2
• /
• pp.135-154
• /
• 2010

The green craze has hit all the world lately. The green revolution which means immense changes for sustainable development under the new environment-economy system is foretelling that we should have new angle to the environment and economy. This paper is about the development of the model and indicators for construction of ECO(Energy Circulating Organic)-Village which is the green growth option of local community. This model is composed of three concepts - SPDC (about procedural methodology of Model), Virtuous Circle (about functional relationships of three requisites), Network (about spatial relationships between communities) - and evaluation indicators. Environment, tourism, industry (Energy & Organic Agriculture) are set as the three requisites for green growth of local community. Nations of the world plunge into the green war which is silent, general, sweeping changes. We can not win this war with the existing thinking system and policy. We need revolutionary changes reconsidering of environmental value and sustainable development strategy of the region. Each of us should go through the changes and this work would be the one among those efforts.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.190-190
• /
• 2016

The Water, Energy, and Food (WEF) nexus is an emerging concept for sustainable resources planning and management. The three valuable resources are inevitably interconnected, that is, it takes water to produce energy; it takes energy to extract, treat, and distribute water; and both water and energy are required to produce food. Although it is challenging to fully understand the complicated interdependency, a few studies have been devoted to interpret the concept and develop the assessment tools. The tools were mainly developed for nation-wide simulations without considering inter-basin or inter-state resources trade. This study tries to present an idea to develop and implement the WEF nexus simulation model in regional scale by advancing the existing nation-wide model with additional capability to simulate the inter-basin trade. This simulation could help local planners and engineers to determine optimal policies and infrastructure solutions to reach and ensure local demand satisfaction. The simulation model is implemented in hypothetical areas with different conditions of WEF demands and supplies. Although the inter-basin trade scenarios are simulated manually, it shows that the inter-basin resources trade could enhance the resources security for a longer time period. In future, an optimization model might be developed to provide the automatic calculation to reach optimum amount of WEF for the trade, which can be a helpful tool in decision making process.

• Solar Energy
• /
• v.20 no.1
• /
• pp.81-89
• /
• 2000

In the present study, the characteristics of conductive and convective heat transfer occurred in a circular absorber of PTC (parabolic trough concentrator) for medium temperature solar energy utility were numerically investigated. A circular tube was considered as an absorber and the shape of PTC modeled in this study was based on the system that was installed in Korea Institute of Energy Research. Not only convection inside the tube but also conduction through the wall of the tube were analyzed, simultaneously. Circumferentially non-uniform heat flux that was simulated from the non-uniform solar disc model proposed by Jose was applied as thermal boundary condition on the tube surface. And, hydrodynamically fully developed laminar velocity profile was used as the inlet boundary condition and it was assumed that the working fluid was water. And, local heat fluxes at the interface of the tube and the working fluid were calculated for different wall thickness and thermal conductivity of the tube at various Reynolds number. Based on the results, the effects of thermal conduction of the tube on the local heat transfer were investigated.

• Advances in nano research
• /
• v.14 no.4
• /
• pp.335-353
• /
• 2023

The possibility of energy harvesting as well as controlled vibration of a three-layered beam consisting of two piezoelectric layer and one core layer made of nonpiezoelectric material is investigated using paradox-free local/nonlocal theory. The three-layered nanobeam is resting on an elastic foundation and subjected to a blast load. Also, the core layer is made of Nano-composites reinforced by CNTs and carbon fibers (MHCD). Governing equations as well as boundary conditions are obtained using Hamilton,s principle. The equations discretized by Generalized Differential Quadrature Method (GDQM) and solved by Newmark beta method. In addition, two differential and integral gains are employed for controlling the forced vibration. The size-dependency of the elastic foundation is considered using two-phase elasticity. The effect of elastic foundation, control gains, nonlocal factor, as well as parameters affecting the core material on the forced vibration and energy harvesting is investigated in detail. The equations as well as solution procedure is validated utilizing some compassion studies. This work can be a basis for future studies on energy harvesting and controlled vibration in small scales.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.217-225
• /
• 2015

Local heating system providing hot air locally to growing parts including shoot apex and flower cluster which were temperature-sensitive organs of cherry tomato was developed to reduce energy consumption for greenhouse heating without decline of crop growth. Growing part following local heating system was composed of double duct distributer which connected inner and outer ducts with hot air heater and winder which moved ducts up and down following growing parts with plant growth. Growing part local heating system was compared with conventional bottom duct heating system with respect to distributions of air and leaf surface temperatures according to height, growth characteristics and energy consumption. By growing part local heating, air temperature around growing part was maintained $0.9{\sim}2.0^{\circ}C$ higher than that of lower part of crop and leaf surface temperature was also stratified according to height. Investigations on crop growth characteristics and crop yield showed no statistically significant difference except for plant height between bottom duct heating and growing part local heating. As a result, the growing part local heating system consumed 23.7% less heating energy than the bottom duct heating system without decrease of crop yield.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.8-17
• /
• 2003

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear Power Plant. In Pipes of energy Plants, sometimes, the local wall thinning may result from severe erosion-corrosion (E/C) damage. However, the effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. In this paper, the monotonic bending tests were performed of full-scale carbon steel pipes with local wall thinning. A monotonic bending load was applied to straight pipe specimens by four-point loading at ambient temperature without internal pressure. From the tests, fracture behaviors and fracture strength of locally thinned pipe were manifested systematically. The observed failure modes were divided into four types; ovalization. crack initiation/growth after ovalization, local buckling and crack initiation/growth after local buckling. Also, the strength and the allowable limit of piping system with local wall thinning were evaluated.

• Journal of the Korean Institute of Rural Architecture
• /
• v.19 no.4
• /
• pp.41-48
• /
• 2017

The objective of this study is to propose a color plan for rural villages that seeks harmony between natural and artificial environments in consideration of the fact that as new and renewable energy businesses increase drastically, problems of landscape color occur in rural areas. To this end, the current color conditions over the target regions are examined in context of energy businesses; a land simulation is developed; a survey on the preferences is conducted with the result analyzed; and finally, a color plan for villages where energy businesses and non-energy businesses are conducted. For the survey, 40 photos including simulation photos and original photos of villages were used: the photos before and after the simulation was applied were shown to village residents. The validity of the selected colors was then evaluated accordingly. The survey was conducted among 15 residents in villages where energy businesses were conducted and 15 in villages where non-energy businesses were conducted. As new and renewable energy methods such as solar energy panels are utilized over rural villages in the future, selecting artificial environmental colors that can better represent the region's identity and that are in harmony with natural environments will be an important factor in community center or housing remodeling projects, local community development projects, and so forth. It is expected that the present study can be utilized as the basis for village color plans that seek to consider actual local conditions based on objective data rather than selecting colors uniformly or based on subjective judgment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.130-135
• /
• 2008

An aerodynamic optimization design process of multistage axial turbine is presented in this article: first, applying quasi-three dimensional(Q3D) design methods to conduct preliminary design and then adopting modern optimization design methods to implement multistage local optimization. Quasi-three dimensional(Q3D) design methods, which mainly refer to S2 flow surface direct problem calculation, adopt the S2 flow surface direct problem calculation program of Harbin Institute of Technology. Multistage local optimization adopts the software of Numeca/Design3D, which jointly adopts genetic algorithm and artificial neural network. The major principle of the methodology is that the successive design evaluation is performed by using an artificial neural network instead of a flow solver and the genetic algorithms may be used in an efficient way. Flow computation applies three-dimensional viscosity Navier Stokes(N-S) equation solver. Such optimization process has three features: (i) local optimization based on aerodynamic performance of every cascade; (ii) several times of optimizations being performed to every cascade; and (iii) alternate use of coarse grid and fine grid. Such process was applied to optimize a three-stage axial turbine. During the optimization, blade shape and meridional channel were respectively optimized. Through optimization, the total efficiency increased 1.3% and total power increased 2.4% while total flow rate only slightly changed. Therefore, the total performance was improved and the design objective was achieved. The preliminary design makes use of quasi-three dimensional(Q3D) design methods to achieve most reasonable parameter distribution so as to preliminarily enhance total performance. Then total performance will be further improved by adopting multistage local optimization design. Thus the design objective will be successfully achieved without huge expenditure of manpower and calculation time. Therefore, such optimization design process may be efficiently applied to the aerodynamic design optimization of multistage axial turbine.