• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권2호
• /
• pp.89-95
• /
• 2018

Background: Incorrect administration of an anesthetic during local anesthesia is one of the most important causes of pain symptoms in patients scheduled for dental procedures. The current study assessed the severity of damage to periodontal tissue following different rates of anesthetic administration. Methods: The research was conducted on 50 outbred male rats with a body mass of 180-240 g. The anesthetic used was 1% articaine. Results: The results showed that administration of the anesthetic at a rapid pace caused structural damage to the periodontal tissue. Further, signs of impaired microcirculation were noted at all rates of administration. Biochemical studies demonstrated changes in the level of glucose and enzymes with the rapid introduction of the anesthetic, indicating severe systemic stress response of the body. Conclusions: Injection of local anesthetic at any rate of introduction induces vascular congestion in the microcirculatory bloodstream and exudative reactions. Rapid introduction of an anesthetic causes progression of structural changes in the gingival tissue.

• Ocean Systems Engineering
• /
• 제14권1호
• /
• pp.1-16
• /
• 2024

This paper investigates the impact of local joint flexibility (LJF) on the fatigue life of jacket-type offshore platforms. Four sample platforms with varying geometric properties are modeled and analyzed using the Opensees software. The analysis considers the LJF of tubular joints through the equivalent element and flexible link approaches, and the results are compared to rigid modeling. Initially, modal analysis is conducted to examine the influence of LJF on the frequency content of the structure. Subsequently, fatigue analysis is performed to evaluate the fatigue life of the joints. The comparison of fatigue life reveals that incorporating LJF leads to reduced fatigue damage and a significant increase in the longevity of the joints in the studied platforms. Moreover, as the platform height increases, the effect of LJF on fatigue damage becomes more pronounced. In conclusion, considering LJF in fatigue analysis provides more accurate results compared to conventional methods. Therefore, it is essential to incorporate the effects of LJF in the analysis and design of offshore jacket platforms to ensure their structural integrity and longevity.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.647-654
• /
• 2006

In orthotropic steel decks, it is likely to have defects due to fatigue damages because most of structural joints(the connection of longitudinal rib and transverse rib, the connection of deck plate and longitudinal rib) are connected by welds. However. orthotropic steel decks have many advantages. such as light weight and reduction of construction time. in comparison with concrete decks. Therefore. they are mostly used in long-span bridges and urban highway bridges. This study consists of the cause identication of fatigue damage and the suggestion of rational thickness on deck plate about the connection of deck plate and longitudinal rib. The results are as follows: fatigue damage cause at the connection of deck plate and longitudinal rib is local deformation in deck plate. And, rational thickness of deck plate is 16mm thickness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.215-222
• /
• 2007

Coating of Hot-dip galvannealed steel consists of various Fe-Zn intermetallic compounds. Since the coating is hard and there for is very brittle, the surface of steel sheet is easy to be ruptured during second manufacturing processing. This is called as powdering. In addition, forming equipment might be polluted with debris by powdering. Therefore, various research have been carried out to prohibit powdering fur improving the quality of GA steel. This paper carried out finite element analysis combined with damage model which simulate the failure of local layer of hot-dip galvannealed steel surface during v-bending test. Since the mechanical property of intermetallic compound was unknown exactly, we used the properties calculated from measurements. The specimen was divided into substrate, coating layer and interface layer. Local failure at coating layer or interface layer was simulated when elemental strain reached a prescribed strain.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2005년도 춘계학술발표회 논문집
• /
• pp.182-187
• /
• 2005

호남지방의 집중호우 예측 가능성을 향상시키기 위하여 레이더 자료동화를 이용한 예측가능성 제고, 광주지방의 고층자료를 분석하여 집중호우 발생시의 종관장을 해석하였다. 자료동화 자료로는 진도 S-band 레이더 원시자료를 이용한 고도별 수평 바람장을 산출하여 사용하였다. 또한, PC-cluster를 platform으로 사용하는 호남지방의 고해상도 기상예측시스템을 이용하여, 레이더 수평 바람장 자료의 동화가 집중호우 및 중규모 순환장 예측정확도에 미치는 영향을 살펴보았다.

• 한국재난관리표준학회지
• /
• 제3권1호
• /
• pp.33-42
• /
• 2010

본 논문에서는 전체해석과 국부해석 조합방법을 이용하여 국부손상 또는 균열의 영향을 반영한 트러스교의 전체지간에서의 응력거동을 예측하였다. 이를 위해서 전체 구조체는 프레임요소에 의한 해석을 수행하고 국부 상세부분은 쉘요소에 의한 해석을 수행하여 두 결과를 조합함으로써 교량의 연결부처럼 응력분포가 복잡한 부분에서 이동하중에 따른 응력이력을 손쉽게 산정하게 된다. 트러스 연결부의 실제 기하학적 형상 및 강성을 전체 프레임해석에 고려하기 위해 국부 쉘모델과 프레임모델의 변위 비교를 통해 프레임 모델의 단면수정계수를 산정하였으며, 실제 공용중인 트러스교의 실험값과 해석값을 비교하여 전체해석-국부해석 조합방법을 검증하였으며, 더 나아가 국부손상의 영향이 반영된 국부 쉘모델 해석결과를 전체해석에 반영시켰다.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.91-98
• /
• 2023

최근 국지성 폭우로 인한 침수 피해가 빈번하게 발생함에 따라 침수 피해를 사전 예방하기 위한 침수 예측 연구가 진행되고 있다. 본 논문에서는 머신 러닝 기반으로 강우 데이터를 이용해 침수 깊이와 침수 위치를 예측하는 모델을 개발하는 방법을 연구한다. 실시간 강우량을 입력으로 사용하여 다양한 강우 분포 패턴에 강건하게 구성하고 적은 메모리로 모델을 학습시킬 수 있는 2가지 데이터 셋(set) 구성 방법을 제시하였다. 침수에 유의미한 영향을 미치는 valid total 데이터는 침수 위치는 잘 예측했지만, 특정 강우 패턴에 대해 값이 다르게 나타나는 경향을 띠었다. 부분적이지만 침수에 영향을 미치는 영역을 valid local이라 한다. Valid local은 고정점 방법에 대해서는 잘 학습되었지만, 임의점 방법에 대해서는 침수 위치를 정확하게 나타내지 못했다. 본 연구를 통해 실시간으로 침수 깊이와 위치를 예측할 수 있게 되어 큰 피해를 예방할 수 있을 것으로 예상된다.

• Computers and Concrete
• /
• 제1권3호
• /
• pp.227-248
• /
• 2004

A combined experimental-computational study of a double edge-notched stone specimen subjected to tensile loading is presented. In the experimental part, the load-deformation response and the displacement field around the crack tip are recorded. An Electronic Speckle Pattern Interferometer (ESPI) is used to obtain the local displacement field. The experimental results are used to validate a numerical model for the description of fracture using finite elements. The numerical model uses displacement discontinuities to model cracks. At the discontinuity, a plasticity-based cohesive zone model is applied for monotonic loading and a combined damage-plasticity cohesive zone model is used for cyclic loading. Both local and global results from the numerical simulations are compared with experimental data. It is shown that local measurements add important information for the validation of the numerical model. Consequently, the numerical models are enhanced in order to correctly capture the experimentally observed behaviour.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.209-216
• /
• 2006

For evaluation of building performance, a nonlinear dynamic capacity of the building is a key parameter. In this study, an reinforced concrete special moment resisting frame building was chosen to study the process of determining the nonlinear dynamic capacity. The building, which was designed by IBC 2003 representing new codes, was composed of special moment resisting frames in the perimeter and internal frames inside the building. The capacity, which is inter-story drift capacity, consists of two categories, local and global collapses. Global collapse capacity was determined by incremental dynamic analysis. Local collapse capacity was determined by the same method except for utilizing damage index. In audition to this, it was also investigated that the effect of including internal frames designed by gravity load in the analysis. Results showed that the damage index is a useful tool for determining local collapse. Furthermore, including the internal frames with special frames in the analysis is very important in determining the capacity of a building so both must be considered at the same time.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.220-227
• /
• 2002

This study introduces the fragility analysis method for the safety evaluation of reinforced concrete pier subject to earthquake. Damage probability is calculated instead of the failure probability from definition of the damage state in the fragility curve. Not only the damage model determined by the response of structure subject to earthquake, but also the plastic-damage model which can represent the local damage is applied to fragility analysis. The evaluation method of damage state by damage variable in global structure is defined by this procedure. This study introduces the fragility analysis method considering the features of nonlinear time history behavior of reinforced concrete element and the plastic behavior of materials. At last, This study gives one of the approach method for seismic margin evaluation with the result of fragility analysis to design seismic load.