• 한국멀티미디어학회논문지
• /
• 제5권1호
• /
• pp.68-76
• /
• 2002

이동 호스트에서의 멀티캐스트에는 호스트이동성, 멀티캐스트 결정 문제, 삼각라우팅, 터널 집중성 문제, 재전송의 폭주, 대역폭 낭비 등의 문제가 있다. 무선에서의 대역폭 낭비는 전송률을 떨어뜨리는 결정적 요인이다. 본 논문에서는 대역폭 낭비를 해결하는 방법으로 호스트 이동성, 그룹관리, 멀티 캐스트 라우팅 프로토콜을 통합하여 신뢰성 있는 패킷 손실 복구를 할 수 있는 FIM을 제안한다. FIM은 IP Mobility Support와 IGMP, DVMRP를 통합하고, FEC와 수신자 기반 지역복구방식을 사용하였다. 제안한 프로토콜의 성능은 동종 독립 손실, 이종 독립 손실, 상호 의존적 손실로 나누어 분석 하였다. 손실 모델에 대한 평가는 전송그룹의 크기가 일정크기를 넘어서면, 지역그룹의 크기와 비례하여 성능이 향상되고 있음을 세 모델 전체에서 확인할 수 있었다. 따라서 제안된 프로토콜은 이동 호스트에서 데이터의 양과 수신자의 수가 많은 환경에서 효율적 임을 나타내었다.

• 한국전산유체공학회지
• /
• 제7권2호
• /
• pp.8-16
• /
• 2002

A numerical study on the use of the momentum interpolation method for flows with a large body force is presented. The inherent problems of the momentum interpolation method are discussed first. The origins of problems of the momentum interpolation methods are the validity of linear assumptions employed for the evaluation of the cell-face velocities, the enforcement of mass conservation for the cell-centered velocities and the specification of pressure and pressure correction at the boundary. Numerical experiments are performed for a typical flow involving a large body force. The numerical results are compared with those by the staggered grid method. The fact that the momentum interpolation method may result in physically unrealistic solutions is demonstrated. Numerical experiments changing the numerical grid have shown that a simple way of removing the physically unrealistic solution is a proper grid refinement where there is a large pressure gradient. An effective way of specifying the pressure and pressure correction at the boundary by a local mass conservation near the boundary is proposed, and it is shown that this method can effectively remove the inherent problem of the specification of pressure and pressure correction at the boundary when one uses the momentum interpolation method.

• 인터넷정보학회논문지
• /
• 제7권4호
• /
• pp.33-43
• /
• 2006

본 논문에서는 조영 영상을 받아들여 관상동맥을 효과적으로 추출하는 방법을 소개한다. 혈관 추출에 일반적으로 사용되는 디지털 혈관조영술(DSA : Digital Subtraction Angiography)은 조영제 투입 전에 촬영된 마스크 영상과 조영제 투입 후의 혈관 대비가 나타나는 라이브 영상과의 차이를 이용하여 빠르게 혈관 영역만을 검출하는 방법이다. 그러나 이 방법은 배경의 움직임에 민감하고 두 영상간의 지역적인 배경 명암 분포의 변화에 따라 오 검출이 발생할 수 있다는 단점을 가진다. 따라서 본 논문에서는 배경 텍스쳐의 유사도를 분석하여 움직임의 차이가 가장 작은 영상을 선택함으로써 배경의 움직임에 기인하는 구조적인 문제를 해결하고, 선택된 영상의 지역적 명암 보정을 통해 혈관 영역만을 효과적으로 추출하는 방법을 제안한다. 실험 결과는 제안된 방법이 기존의 방법보다 오 인식률은 감소하고 정확도는 증가함을 보여준다.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.369-377
• /
• 2011

Since well-calibrated satellite data is critical for their applications, calibration and validation of COMS science data was one of the key activities during the IOT. COMS MI radiometric calibration process was divided into two phases according to the out-gassing of the sensor: calibrations of the visible (VI) and infrared (IR) channels. Different from the VIS calibration, the calibration steps for the IR channels followed additional processes to secure their radiometric performances. Primary calibration steps of the IR were scan mirror emissivity correction, midnight effect compensation, slope averaging and 1/f noise compensation after a nominal calibration. First, the scan mirror emissivity correction was conducted to compensate the variability of the scan mirror emissivity driven by the coating material on the scan mirror. Second, the midnight effect correction was performed to remove unreasonable high spikes of the slope values caused by the excessive radiative sources during the local midnight. After these steps, the residual (difference between the previous slope and the given slope) was filtered by a smoothing routine to eliminate the remnant random noises. The 1/f noise compensation was also carried out to filter out the lower frequency noises caused from the electronics in the Imager. With through calibration processes during the entire IOT period, the calibrated IR data showed excellent performances.

• Korean Journal of Geomatics
• /
• 제2권1호
• /
• pp.83-89
• /
• 2002

The cadastral maps as many as about 750,000 map sheets to cover 34,751,000 parcels of land of Korea, are being digitalized. The problem of shrinkage-expansion of the paper cadastral maps has to be resolved for the new digital maps, where the nodes and vertices of the parcel boundaries are represented by coordinates. The photo coordinate refinement techniques, two dimensional projective transformation and local area transformation as in the reseau grid method, were introduced for this distortion correction. Using the fact that original maps drawn on the plane tables in field from 1910 to 1918 have grid lines and have been preserved well, a strategic flow to apply the refinement techniques to the digital maps with the original maps as controls was developed. To accommodate the presence or absence of the original maps and grid lines, and different scales and sizes of the maps, the strategy was implemented by a computer program package. Various distortions and corrections were simulated and errors were evaluated. The RMS errors in the corrected digital maps were allowable, thus, the method developed in this study was to be applicable for the digital cadastral maps.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권2호
• /
• pp.141-152
• /
• 2018

The heating process such as line heating, triangular heating and so on is widely used in plate forming of shell plates found in bow and stern area of outer shell in a ship. Local shrinkage during heating process is main physical phenomenon used in plate forming process. As it is well appreciated, the heated plate undergoes the change in material and mechanical properties around heated area due to the harsh thermal process. It is, therefore, important to investigate the changes of physical and mechanical properties due to heating process in order to use them plate the design stage of shell plates. This study is concerned with the development of formula of plastic hardening constitutive equation for steel plate on which line heating is applied. In this study the stress correction formula for the heated plate has been developed based on the numerical simulation of tension test with varying plate thickness and heating speed through the regression analysis of multiple variable case. It has been seen the developed formula shows very good agreement with results of numerical simulation. This paper ends with usefulness of the present formula in examining the structural characteristic of ship's hull.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.639-641
• /
• 2012

기울기 값과 방향성의 특징 값을 이용하는 HOG와 선형SVM을 분류기로 사용하는 사람검출 기법은 슬라이딩 윈도우 기반 사람검출에 성공적으로 적용되었다. 또한 텍스처 구별에 강인한 특징을 가지고 있는 LBP를 HOG와 함께 특징 서술자로 적용하는 방법은 서로의 단점을 상호 보안하여 향상된 성능을 보인다. 본 논문에서는 기존 HOG제곱근 Gamma 보정을 다양한 Gamma 보정 값으로 대체하고 성능을 분석한다.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.611-617
• /
• 2004

This paper presents a simple method of rotational motion estimation and correction for roll axis stabilization of an image. The scheme first computes the rotation center by taking least squares of selected local velocity vectors, and the rotational angle is found from special subset of motion vectors. Roll motion correction is then performed by the nearest neighbor interpolation technique. To show the effectiveness of our approach, the synthetic and real images are evaluated, resulting in better performance than the previous ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.231-236
• /
• 2003

This paper presents a simple approach on the rotational motion estimation and correction for the roll stabilization of the sight system. The algorithm first computes the rotational center from the selected local velocity vectors of related pixels by least square methods. And then, rotational angle is found from the special subset of the motion vector. Finally, motion correction is performed by the nearest neighbor interpolation technique. In order to show the performance of the algorithm, the evaluation for the synthetic and real image was performed. The test results show good performance compared with previous approach.

• Journal of Welding and Joining
• /
• 제10권1호
• /
• pp.20-34
• /
• 1992

Characteristics of two correcting methods, a new Autogeneous GTAW heating (TIG) method and the conventional GMAW bead-on plate welding(MIG) method, for distorted aluminum fabrication structures were studied. As a result of microscopic study of Autogeneous GTAW heating and GMAW bead-on plate welding areas, porosities in weld metal and surface cracks in local heating zone were found. Through the mechanical tests, it was verified that porosities decrease tensile strength and surface of distortion, angular displacement and transeverse shrinkage were measures and compared. In order to investigate changes of material properties in heating area and cause of defects such thermal stresses were calculated by ADINA. Through the computations of transient thermal stresses and microscopic observation of fracture surface, thermal stress was found to be the cause of crack during Autogeneous GTAW heating.