• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.421-426
• /
• 2009

Recently, the design process for a railway bogie frame in Europe has been carried out according to the norm EN 13749. The activities in the norm EN shall demonstrate that the design of the bogie frame fulfills the acceptances of 4 steps of the program such as structural calculation, static tests, fatigue test and on-tracks tests. At the end of the acceptance program, the on-tracks tests have the aim to measure the real stress history generated in operation and to verify that they are reasonably next to those calculated and measured on the test rig. Therefore, in order to assure the safety of the railway vehicle, it is important to examined the durability of that under load histories measured from on-tracks tests. In this study, under variable amplitude loading based on the actual acceleration history, fatigue analysis of the welding bogie frame is investigated by using durability software. Moreover, the fatigue life of the frame under the loading in the norm EN fatigue test condition is evaluated and compared with the life under variable amplitude loading.

• Steel and Composite Structures
• /
• 제30권2호
• /
• pp.123-140
• /
• 2019

This paper presents experimental study on effects of width-to-thickness ratio and loading history on cyclic rotational capacity of H-shaped steel beams subjected to pure bending. Eight Class 3 and 4 H-shaped beams with large width-to-thickness ratios were tested under four different loading histories. The coupling effect of local buckling and cracking on cyclic rotational capacity of the specimens was investigated. It was found that loss of the load-carrying capacity was mainly induced by local buckling, and ductile cracking was a secondary factor. The width-to-thickness ratio plays a dominant effect on the cyclic rotational capacity, and the loading history also plays an important role. The cyclic rotational capacity can decrease significantly due to premature elasto-plastic local buckling induced by a number of preceding plastic reversals with relative small strain amplitudes. This result is mainly correlated with the decreasing tangent modulus of the structural steel under cyclic plastic loading. In addition, a theoretical approach to evaluate the cyclic rotational capacity of H-shaped beams with different width-to-thickness ratios was also proposed, which compares well with the experimental results.

• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.591-607
• /
• 2004

The substance of the use of the derived non-linear creep constitutive equations under variable stress levels (see first part of the paper, Kmet 2004) is explained and the strategy of their application is outlined using the results of one-step creep tests of the steel spiral strand rope as an example. In order to investigate the creep strain increments of cables an experimental set-up was originally designed and a series of tests were carried out. Attention is turned to the individual main steps in the production and application procedure, i.e., to the one-step creep tests, definition of loading history, determination of the kernel functions, selection and definition of constitutive equation and to the comparison of the resulting values considering the product and the additive forms of the approximation of the kernel functions. To this purpose, the parametrical study is performed and the results are presented. The constitutive equations of non-linear creep of cable under variable stress history offer a strong tool for the real simulation of stochastic variable load history and prediction of realistic time-dependent response (current deflection and stress configuration) of structures with cable elements. By means of suitable stress combination and its gradual repeating various loads and times effects can be modelled.

• 소성∙가공
• /
• 제17권6호
• /
• pp.420-428
• /
• 2008

The effect of loading path changes on the strain and mechanical properties of a commercial pure aluminum was studied using flat rolling and groove rolling. Material during flat rolling undergoes a continuous monotonic compressive loading, while one during groove rolling experiences a series of cross compressive loading. Four-pass flat rolling and groove rolling experiment are designed such that the aluminum undergoes the same amount of the strain at each pass. The rolling experiment was performed at room temperatures. Specimens for tensile test are fabricated from the plate and bar rolled. In addition, the strain distribution for the plate and bar cold rolled specimens is also calculated by finite element method. The results reveal that differences of loading path attributed by monotonic loading(flat rolling) and cross loading(groove rolling) significantly influence the mechanical properties such as yield stress, ultimate tensile stress, strain hardening and elongation. It is clear that the different loading path can give raise to change the deformation history, although it is deformed with same amount of strain for same material.

• 한국해안해양공학회지
• /
• 제14권4호
• /
• pp.286-294
• /
• 2002

본 연구에서는 응력이력과 시간이력이 과압밀 상태에서의 간극수압계수, A(Skempton, 1954)에 미치는 영향에 관하여 실험적으로 규명하였다. 응력경로 회전각, 과압밀비 및 접근길이로 정의되는 응력이력과 재하속도 이력 그리고 정지기간으로 정의되는 시간이력에 따른 간극수압계수(A)의 값과 변화 양상을 보았다. 응력경로 회전각에 따른 간극수압계수(A)는 그 값과 변화 경향에서 상이하게 나타났고, A의 값에 있어서는 과압밀비 의존성을 보였지만, 변화 양상에서는 의존성을 찾아 볼 수 없었다. 접근길이에 따른 간극수압계수(A)는 초기 미소 변형률 구간을 제외하고는 큰 영향을 받지 않았다. 또한, A의 값은 재하속도 이력에 영향을 받았지만, 변화 경향은 모두 동일하게 나타났다. 마지막으로 정지기간에 따른 과압밀점토의 간극수압계수, A는 정지기간의 유무에 따라 변화 경향과 값이 큰 차이를 보이다가 일정 축차응력 또는 변형률을 넘어서면 거의 유사한 값을 나타내었다.

• 한국강구조학회 논문집
• /
• 제14권5호통권60호
• /
• pp.613-625
• /
• 2002

본 연구는 강한 반복하중하에서 강부재가 파괴에 이르는 손상과정을 규명하고, 손상과 관련된 인자들을 이용하여 손상지수를 제시하며, 이와 관련된 해석 기법을 개발하는 것을 목적으로 한다. 제안된 손상평가 방법은 변형이 가장 심하게 집중된 단면에 있어서 국소 변형율의 이력에 초점을 맞추어 유도되었다. 해석모델은 좌굴변형의 발생 방향을 가정한 켄틸레버형 강상자형 부재이다. 파괴에 이르는 중심 압축하중과 일정 압축하중이 가해진 상태에서 반복 제어변위가 작용하는 강부재에 대해 비선형해석을 실시하였다. 본 해석에 적용된 주요 변수는 하중 재하패턴, 강종이다. 각 변수가 파괴모드, 변형능력, 그리고 손상과정에 미치는 영향을 기술하였고, 각각 강종에 따른 파괴 과정을 비교하였다. 그 결과 강한 반복하중하에서의 강부재의 파괴는 국부좌굴에 의해서 결정되고 특히 파괴와 직접적으로 연관성이 있는 국소 소성변형율과 관련되어 있음을 알 수 있었다.

• 한국철도학회논문집
• /
• 제19권5호
• /
• pp.638-646
• /
• 2016

고속철도 교량 상에 설치되는 장대레일은 궤도와 교량의 상호작용에 의해 레일에 발생하는 축력분포가 토노반상에 비해 매우 복잡하며, 교량에 가해지는 외력의 영향이 추가로 발생되어 장대레일 축력과 함께 추가적인 문제를 야기한다. 이상과 같은 궤도-교량 상호작용에 의해 발생되는 각종 물리적인 현상을 해석하고 제한하기 위해서 국내에서는 교량 상 궤도 설계 시 설계지침(KR C-08080, 궤도-교량 종방향 상호작용 해석)을 운영하고 있다. 국내의 궤도/교량 상호작용 해석 및 설계 기술은 유럽의 UIC 774-3R에서 제시된 해석방법과 기준을 적용하며, 보수적인 해석방법과 결정론적인 단일 물성치를 제시하고 있다. 최근 하중 이력을 고려한 궤도-교량 상호작용 해석기법에 대한 연구가 활발하게 진행되고 있으나, 하중이력에 의한 저항물성치 변화에 대한 연구는 미흡한 실정이다. 본 연구에서는 교량 상 콘크리트궤도에 사용되는 레일체결장치를 대상으로 하중이력에 대한 거동특성을 분석하였다. 이를 위하여 현장조건을 모사하여 종방향 하중과 수직하중을 재하하였으며, 실험결과 분석을 통하여 체결장치별 저항물성치(저항력, 탄성한계변위)를 제시하였다. 또한 코드에서 제시하는 물성치와 비교연구를 수행하였다.

• 한국멀티미디어학회논문지
• /
• 제21권4호
• /
• pp.513-526
• /
• 2018

Container load problems are conventional issues in history. Loading cylindrical or rectangle packages in restricted space is required to be efficient to minimize remaining area. Many people have depended on experience or known simple algorithms for a long time. Recently systematic algorithms are published over the world with developed computer technology. Maximal rectangles algorithm is well known to load arbitrary rectangles in a larger rectangle container with the organized manners. However, this algorithm has significant drawbacks, which are influenced by orientation of input load. We propose post-selective method to complement these orientation effects, which is found out to improve the loading efficiency.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.115-123
• /
• 1994

Under variable amplitude loading conditions, retardation or accelerated condition of fatigue crack growth occurs with every cycle, Because fatigue crack growth behavior varied depend on load time history. The modeling of stress amplitude with storm loading acted to ships and offshore structures applied this paper. The crack closure behavior examine by recording the variation in load-strain relationship. By taking process mentioned above, fatigue crack growth rate, crack length, stress intensity factor, and crack closure stress intensity factor were obtained from the stress cycles of each type of storm ; A(6m), B(7m), C(8m), D(9m), E(11m) and F(15m) which was wave height. It showed that the good agreement with between the experiment results and simulation of storm loads. So this estimated method of crack propagtion rate gives a good criterion for the safe design of vessels and marine structure.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.192-200
• /
• 1994

The methodology of a simple probabilistic fatigue crack under random loading is proposed. Using the crack closure concept, the crack opening stress is assumed to be constant during random loading. The loading history was analyzed to determine the probability density functions, probability distribution functions and other related parameters for the probabilistic fatigue crack growth analysis. Fatigue crack growth using the exisiting available data was predicted by the proposed probabilistic analysis and compared with experimental data.