• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1339-1347
• /
• 2013

기존 단축 크리프시험에서는 천이 크리프의 영향을 무시하고 정상상태 크리프만을 고려하기 때문에 실제 크리프 특성을 나타내지 못한다. 이에 본 연구에서는 천이크리프를 고려한 압입 크리프 물성평가법을 제시한다. 다양한 재료에 대해 구형압입시험 전산모사를 이용해 크리프 물성변화에 따른 거동을 살펴보고, 크리프 특성을 무차원 변수들의 회귀식으로 표현한다. 이를 토대로 천이크리프를 고려한 압입 크리프 물성평가 프로그램을 생성했다. 제시한 물성평가 프로그램을 통해 압입 하중-변위 곡선으로부터 크리프지수, 계수값들을 각각 1.1%, 2.3% 오차범위에서 예측할 수 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.562-577
• /
• 2014

A reliable steady/transient hydro-elastic analysis is developed for flexible (composite) marine propeller blade design which deforms according to its environmental load (ship speed, revolution speed, wake distribution, etc.) Hydro-elastic analysis based on CFD and FEM has been widely used in the engineering field because of its accurate results however it takes large computation time to apply early propeller design stage. Therefore the analysis based on a boundary element method-Finite Element Method (BEM-FEM) Fluid-Structure Interaction (FSI) is introduced for computational efficiency and accuracy. The steady FSI analysis, and its application to reverse engineering, is designed for use regarding optimum geometry and ply stack design. A time domain two-way coupled transient FSI analysis is developed by considering the hydrodynamic damping ffects of added mass due to fluid around the propeller blade. The analysis makes possible to evaluate blade strength and also enable to do risk assessment by estimating the change in performance and the deformation depending on blade position in the ship's wake. To validate this hydro-elastic analysis methodology, published model test results of P5479 and P5475 are applied to verify the steady and the transient FSI analysis, respectively. As the results, the proposed steady and unsteady analysis methodology gives sufficient accuracy to apply flexible marine propeller design.

• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1082-1087
• /
• 2021

프로펠러축은 프로펠러 하중 및 편심추력의 영향으로 인해 정적, 동적, 과도상태 각각 거동의 패턴이 달라져 선미관 후부베어링의 국부하중 변화를 일으킴으로써 선박 축계의 안정성에 큰 영향을 미치며, 결과적으로 축 지지 베어링의 손상위험을 증가시킨다. 이를 방지하기 위한 일련의 축계정렬연구는 선급강선규칙과 조선소 지침을 기반으로 준정적 상태에서 축과 선미관 베어링간의 상대적 경사각과 유막유지, 선체변형에 따른 영향평가를 최적화 하는데 중점을 두어 진행 되어왔다. 그러나 보다 진일보한 형태의 추진축계의 안정성을 보장하기 위해서는 조타장치의 전타시 발생하는 급격한 선미유동장 변화와 같은 과도동적상태변화 조건에서의 상세 연구가 필요하다. 이러한 관점 하에 본 연구에서는 50,000 DWT 중형 유조선을 대상으로 스트레인 게이지법과 변위센서을 이용하여 선박운전 중 대표적 과도상태인 좌현 전타시의 프로펠러 축 거동이 선미관 베어링에 미치는 영향을 교차검증한 결과, 프로펠러 편심추력변동이 선미관 베어링의 하중을 일시적으로 저감시켜 베어링 하중을 완화시키는 것을 확인하였다.

• 항공우주시스템공학회지
• /
• 제11권3호
• /
• pp.8-15
• /
• 2017

본 논문에서는 압전유압펌프가 적용된 브레이크 등가 유압회로를 구성하고, 유압회로의 가감압 특성 실험 및 부하압 제어에 대한 연구를 수행하였다. 유압회로의 가감압 특성을 파악하기 위해 펌프 입력 전압에 따른 부하압 형성 실험을 수행하였고, 솔레노이드 밸브 특성이 감압에 미치는 효과를 파악하는 실험을 수행하였다. 가압 특성 실험을 통해 유압회로의 부하압 상승에 필요한 과도응답시간은 압력상승 구배를 조절하는 전압제어를 적용하여 개선할 수 있음을 확인하였고, 감압시는 솔레노이드 밸브 특성을 활용한 밸브 개폐시간 제어와 전압제어를 통해 과도응답시간 개선이 가능함을 확인하였다. 본 연구에서 개발된 제어기법을 적용하여 부하압 제어실험을 수행한 결과, 가압의 경우 10ms 이내로, 감압의 경우 30ms 이내로 과도응답시간을 개선할 수 있었다. 본 연구에서 제안된 부하압 제어기법은 압전유압펌프가 적용된 유압 브레이크 회로의 부하압을 제어하는데 매우 유용할 것으로 판단된다.

• 한국군사과학기술학회지
• /
• 제22권1호
• /
• pp.60-71
• /
• 2019

Electrical power supply is needed to operate the radar system in the field. In addition, it should not cause performance deterioration under the environmental factors due to characteristics of military equipment, and should not cause malfunction due to electromagnetic waves generated in radar, and then should not cause malfunction in radar equipment. Therefore, By applying a permanent magnet to the rotor of the generator, light weighting and high efficiency of generator were achieved. As a result, electrical performance test of the generator, the rated output power was 80.8 kW, the maximum output power was 88.1 kW, and the output power efficiency was 98.1 % under the full load condition. When the load capacity of the generator was changed from no load to full load, the maximum voltage variation was 3.6 % and the frequency variation was 0.3 %. As a result of the transient response test for measuring the output power of the generator according to the load characteristics change, the maximum voltage variation of 7.9 %, frequency variation of 0.5 % were confirmed, and the transient response time was 2.1 seconds. Environmental tests were conducted in accordance with MIL-STD-810G and MIL-STD-461F to evaluate the operability of the generator groups. Normal operation of radar system generator group was confirmed under high temperature and low temperature environment conditions. Electromagnetic tests were conducted to check if electromagnetic wave generated from both radar system and generator group in operation caused any performance deterioration to each other. As a result, it was confirmed that the performance deterioration due to electromagnetic wave inflow, radiation, and conduction did not occur. It is expected that it should be possible to provide high efficiency power supply and stable power supply by applying to various military system as well as radar system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1350-1352
• /
• 1995

This paper discribed the characteristic of I-t cross-over-point between current limited-fuse and explusion fuse(Bay-O-Net Fuse) and fuse protection in pad-mounted transformer that was generated internal faults and the short circuit of secondary side(load side). In the I-t cross-over-point, current limited fuse was melted when transient recovery voltage was raised rapidly.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.47-52
• /
• 1996

Interior noise, engine speed and vehicle speed are measured under road-load condition and interior noise signal is transformed by using the transient signal analysis methods such as the spectrogram and wavelet transform. Using the analyzed results, subjective noise criteria such as the loudness, noisiness and articulation index at each vehicle speed can be estimated and characteristics of interior noise for various running mode can be discussed in the viewpoint of noise quality.

• 동력기계공학회지
• /
• 제6권3호
• /
• pp.64-70
• /
• 2002

A fast decoupled algorithm for time domain simulation of power electronics circuits is presented. The circuits can be arbitrarily configured and can incorporate feedback amplifier circuits. This simulation algorithm is performed for the input series output parallel connected 2 switch forward converter. Steady state and large signal transient responses due to a step load change are simulated. The simulation results are verified through experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.316-318
• /
• 2000

In this paper. we have simulated the transient stability of power system with motor loads. In study of power system stability, modelling of motors is required for the system with large concentrations of motors. Therefore the dynamics attributable to motors are usually the most significant aspects of dynamics characteristics of system loads. A synchronous motor is modelled as a dynamic load. We investigate the effect of synchronous motors of Kwang Yang network with three phase fault.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.1120-1121
• /
• 2005