• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.853-871
• /
• 2015

Up to now, Japan has more than 200 corrugated steel web composite beam bridges which are under construction and have been constructed, and China has more than 30 corrugated steel web composite beam bridges. The bridge type includes the simply supported beam, continuous beam, continuous rigid frame and cable stayed bridge etc. The section form has developed to the single box and multi-cell box girder from the original single box and single chamber. From the stress performance and cost saving, the span range of 50~150 m is the most competitive. At present, the design mostly adopts the computational analytical method combining the spatial bar system model, plane beam grillage model and solid model. However, the spatial bar system model is short of the refinement analysis on the space effect, such as the shear lag effect, effective distribution width problem, and eccentric load factor problem etc. Due to the similarity of the plane beam grillage method in the equivalence principle, it cannot accurately reflect the shearing stress distribution and local stress of the top and bottom plates of the box type composite beam. The solid model is very difficult to combine with the overall calculation. Moreover, the spatial grid model can achieve the refinement analysis, with the integrity of the analysis and the comprehensiveness of the stress checking calculation, and can make up the deficiency of the analytical method currently. Through the example verification of the solid model and spatial grid model, it can be seen that the calculation results for the stress and the displacement of two models are almost consistent, indicating the applicability and precision of the spatial grid model.

• 한국운동역학회지
• /
• 제18권1호
• /
• pp.235-243
• /
• 2008

본 연구는 성장호르몬 활성화와 뼈 형성에 효과가 있도록 고안된 성장호르몬 활성화 신발과 일반 런닝화에서의 운동역학적 변인과 성장호르몬 분비에서 어떠한 차이가 나타나는 지에 대한 평가 및 검증을 수행하였다. 연구 수행 결과 다음과 같은 결론을 얻었다. 첫째, 성장호르몬 활성화 신발이 일반 런닝화에 비해 달리기 시 2km 이내 달리기시 통계적으로 성장호르몬 분비가 유의하게 증가되었다. 둘째, 4km 이내의 걷기 운동에서 청소년기에서는 일반 런닝화보다는 성장호르몬 활성화 신발에서 평균적으로 성장호르몬이 많이 분비되는 것으로 나타났다. 셋째, 성장호르몬 활성화 신발은 걷기동작에서는 일반 런닝화보다 더 큰 부하를 신체에 전이시키고, 달리기에서는 일반 런닝화 보다 더 큰 충격량을 신체에 전달하고, 동시에 신체 일부분에 집중되는 부하를 분산시키고 작은 부하율을 통한 부상 발생원인을 제거함으로써 부상 없이 몸에 자극을 크게 전달, 성장호르몬 분비를 활성화 시킬 것으로 판단된다.

• 디지털콘텐츠학회 논문지
• /
• 제9권2호
• /
• pp.295-303
• /
• 2008

인터넷을 통한 전자상거래가 보편화됨에 따라 다품종, 소량 생산품을 취급하는 중소 인터넷 쇼핑몰의 수가 증대되었다. 중소 인터넷 쇼핑몰은 그 특성상 다수의 재고물량을 확보할 수 있는 공간이 부족하다. 따라서 전통적인 재고 관리 방법으로 고객의 요구에 즉각적으로 반응하기 어렵다. 본 논문에서는 판매자의 판매량에 따라 공급업체가 재고량을 조절할 수 있는 VMI를 인터넷 쇼핑몰에 도입한 SOHO-VMI를 제안한다. 제안된 SOHO-VMI는 다수의 공급업자 및 판매자와 상호작용 할 수 있는 M $\times$ N 구조를 지원한다. 그리고 기존 시스템에서 사용하는 EDI 문서와 상호작용을 위해 XML/EDI를 사용하도록 제안하였다. 또한, 판매자의 물품 판매 정보 및 계절적 요인을 고려하여, 공급업체에서 물품생산량 및 유통량을 조절 할 수 있는 물류 통계 예측 알고리즘을 제안하였다.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2037-2047
• /
• 1991

본 연구에서는 재료 결정격자의 기본단위나 결정립의 형상등 가장 기본적인 형태가 6각형이라는 점에 착안하여 취성재료의 파손모델로 부재들의 결손을 이용하는 결손확률모델을 제안하여 부재결손에 따른 각각의 파손 해석모델과 결손확률을 구한다. 그리고 비결손모델에서 구한 기본인장하중을 기초로 하여 해석하고자 하는 하중하에서 각각의 파손해석모델을 모델링하여 유한요소법으로 부재결손에 따른 요소중심에서의 최대주응력을 구하여 이론극한인장강도와의 비와 결손확률로 취성재료의 파손확률을 구한다. 또한 취성정도에 따른 균열길이에 대한 치수 매개변수를 구함으로써 재료강 도 연구에 기초가 되게 한다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.271-279
• /
• 2018

Purpose: Probabilistic safety analysis was performed to enhance the safety and reliability of nuclear power plants because traditional deterministic approach has limitations in predicting the risk of failure by crack growth. The study introduces a probabilistic approach to establish a basis for probabilistic safety assessment of passive components. Methods: For probabilistic modeling of fatigue crack growth rate (FCGR), various FCGR tests were performed either under constant load amplitude or constant ${\Delta}K$ conditions by using heat treated X-750 at low temperature with adequate cathodic polarization. Bayesian inference was employed to update uncertainties of the FCGR model using additional information obtained from constant ${\Delta}K$ tests. Results: Four steps of Bayesian parameter updating were performed using constant ${\Delta}K$ test results. The standard deviation of the final posterior distribution was decreased by a factor of 10 comparing with that of the prior distribution. Conclusion: The method for developing a probabilistic crack growth model has been designed and demonstrated, in the paper. Alloy X-750 has been used for corrosion fatigue crack growth experiments and modeling. The uncertainties of parameters in the FCGR model were successfully reduced using the Bayesian inference whenever the updating was performed.

• Steel and Composite Structures
• /
• 제19권4호
• /
• pp.861-876
• /
• 2015

Composite sections design consists on checking that the point defined by axial load and bending moment keeps included within the surface enclosed by the section interaction curve. Eurocode 4 suggests a method for tracing this diagram based on the plastic stress distribution method. However curves obtained according to this criterion overvalue concrete encased sections bearing capacity, especially when axial force comes with high bending moment values, so a correction factor is required. This article proposes a method for tracing this diagram based on the strain compatibility method. When stresses on the section are integrated by considering the Navier hypothesis, the use of the materials nonlinear constitutive equations provides curves much more adjusted to reality. This process requires the use of rather complex software which might reveal as too complex for practitioners. Preserving the same criteria of an elastic-plastic stress distribution, this article presents alternative expressions to obtain the failure internal forces in five significant points of the interaction diagram having considered five different positions of the neutral axis. These expressions are simply enough for their practical application. Concordance of curves traced strictly relying on these five points with those obtained by computer assisted stress integration considering the strain compatibility method and even with Eurocode 4 weighted curves will be presented for three different cross-sections and two different concrete strengths, revealing very good results.

• Journal of Periodontal and Implant Science
• /
• 제46권3호
• /
• pp.152-165
• /
• 2016

Purpose: This study investigated the effects of bone density and crestal cortical bone thickness at the implant-placement site on micromotion (relative displacement between the implant and bone) and the peri-implant bone strain distribution under immediate-loading conditions. Methods: A three-dimensional finite element model of the posterior mandible with an implant was constructed. Various bone parameters were simulated, including low or high cancellous bone density, low or high crestal cortical bone density, and crestal cortical bone thicknesses ranging from 0.5 to 2.5 mm. Delayed- and immediate-loading conditions were simulated. A buccolingual oblique load of 200 N was applied to the top of the abutment. Results: The maximum extent of micromotion was approximately $100{\mu}m$ in the low-density cancellous bone models, whereas it was under $30{\mu}m$ in the high-density cancellous bone models. Crestal cortical bone thickness significantly affected the maximum micromotion in the low-density cancellous bone models. The minimum principal strain in the peri-implant cortical bone was affected by the density of the crestal cortical bone and cancellous bone to the same degree for both delayed and immediate loading. In the low-density cancellous bone models under immediate loading, the minimum principal strain in the peri-implant cortical bone decreased with an increase in crestal cortical bone thickness. Conclusions: Cancellous bone density may be a critical factor for avoiding excessive micromotion in immediately loaded implants. Crestal cortical bone thickness significantly affected the maximum extent of micromotion and peri-implant bone strain in simulations of low-density cancellous bone under immediate loading.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권4호
• /
• pp.210-220
• /
• 2002

We analysised the effect of harmonics on electric machines of substation power system barred on quantitatively measured harmonics and proposed the methods for prevention of harmonics through checking on transformer, rectifier and cable's capacities against harmonics with reference to KEPCO's electricity service standard. In order to analysis harmoninics of silicon rectifier that is power source in DC substation, computer simulations for a substation with TR of high voltage distribution switchboard are performed. Simulation results show that the total harmonic distortion factor becomes smaller for TR primary and receiving points in order rather than silicon rectifier which is harmonic generation source so that the harmonics generated frets each rectifier are outflowed to power supply and high voltage distribution switchboard The result of higher distortion factors of voltage and current for rectifier with 100% load than those with 50 % and 30% indicates that the waveform of voltage and current for the real substation power system at the office-going and the closing hours with heavy loads might be more distorted. As proposed methods for harmonic reduction, the conventional 6 pulse-type for substation is required to be replaced by 12 pulse-type for reduction of 5th and 7th harmonics. The active filter rather than the passive filter is more effective due to severe variance of rectifier loads, but the high cost is price to be paid. In view of installation area and costs, the use of 12 pulse-type transformer is desirable and then the parallel transformer and the rectifier within the substation must be replaced at the same time. Other substations with parallel feeder can use 6 pulse-type transformer.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.81-89
• /
• 2009

In this experimental study, the effects of clean alternative fuels compatible with diesel combustion on nano-sized particle emission characteristics were investigated in a 0.5L auto-ignited single-cylinder engine with a compression ratio of 15. Because the number concentration of nano-sized particles emitted by automotive engine, that are suspected of being hazardous to human health and environment, might increase with engine fuel considerably and recently attracted attention. So a ultra-low sulfur diesel(ULSD), BD100(100% bio-diesel) and Di-Methyl Ether(DME) fuels used for this study. And, as a particle measuring instrument, a fast-response particle spectrometer (DMS 500) with heated sample line was used for continuous measurement of the particle size and number distribution in the size range of 5 to 1000nm (aerodynamic diameter). As this research results, we found that this measurements involving the large proportion of particles under size order of 300nm and number concentration of $4{\times}10^9$ allowed a single or bi-modal distribution to be found at different engine load conditions. Also the influence of oxygen content in fuel and the catalyst could be a dominant factor in controlling the nano-sized particle emissions in auto-ignited engine.

• 한국산업정보학회논문지
• /
• 제21권3호
• /
• pp.29-33
• /
• 2016

청정에너지 발전설비의 요구가 늘면서 태양광, 풍력, 연료 전지 등의 분산전원 개발이 급속도로 증가하고 있다. 반면에 이러한 증가로 인하여 배전시스템은 복잡해지고 있으며 무효전력으로 인한 역률 저감, 불평형 부하에 의한 불평형 전류 등의 문제점을 가지고 있다. 이러한 문제점들을 해결하기 위하여 본 논문에서는 태양광용 3상 4선 타입의 전력변환장치에 무효전력, 불평형 전류를 보상하는 알고리즘을 적용하였다. 제안한 태양광 전력변환장치는 기본 출력동작 뿐만 아니라 계통 전력 품질의 저해요소들에 대해서 보상이 가능하며 PSCAD/EMTDC를 이용한 시뮬레이션을 통하여 그 성능을 검증하였다.