• 제목/요약/키워드: load concentration factor

검색결과 132건 처리시간 0.026초

남동해 연안 퇴적물 내 미량금속 분포 및 생태위해도 평가 (Trace Metal Distribution and Ecological Risk Assessment in Marine Sediments from the Southeast Coastal Areas of Korea)

  • 황동운;최민규;임재현;이인석;이가람;나수진
    • 한국수산과학회지
    • /
    • 제56권4호
    • /
    • pp.438-448
    • /
    • 2023
  • The concentrations of trace metals and organic matters in marine sediments collected from southeast Korean coastal areas were investigated. The primary purpose of this study was to evaluate the contamination status, spatial distribution and potential ecological risks associated with the physiochemical composition in the studied areas. We found that the concentrations of trace metals in marine sediments were as follows: Fe > Mn > Zn > Cr > Pb > Cu > As > Cd > Hg. According to the sediment quality guidelines (SQGs) of Korea, concentrations of Zn, Cr, Cu and Cd at all sampling sites were below threshold effect levels (TEL). However, concentrations of As, Hg, and Pb (i.e., at the 94-98% of sampling sites), were below the TEL. In addition, concentration factors (CF) in the surveyed area were found to be associated with low ecological risks, whereas As, Hg, and Cu showed moderate to high risk levels in some inner parts of the studied bays. Finally, the pollution load index (PLI) and ecological risk index (ERI) of the elucidated metals were linked to moderate ecological risk, pointing to the possibility of being deleterious to some benthic organisms.

외부마감재 고정용 앙카볼트 및 브라켓의 최적설계를 위한 구조해석 (Structural Analysis for Optimal Design of Anchor Bolts and Brackets for Fixing External Finishing Materials)

  • 이석영
    • 에너지공학
    • /
    • 제29권3호
    • /
    • pp.91-96
    • /
    • 2020
  • 외부마감재인 석재벽체를 고정하는 앙카볼트와 브라켓에 대하여 초기 설계단계에서부터 기계 구조물에 요구되는 성능을 유지하고 높은 내구성을 확보가 필요하다. 이를 위해서는 하중조건을 고려한 설계 및 안전성 평가가 필요하므로 이를 검증하기 위한 방법으로 유한요소 해석기법을 적용한 구조해석을 진행하였다. 최적설계를 위해 다양한 형상에 대하여 구조해석을 실시한 결과, 볼트와 접촉되는 브라켓 후면 부위에서 발생되는 최대응력을 완화시키기 위하여 보강 구조물을 추가하였다. 또한, 브라켓에 보강판을 추가로 부착하여 L자 형상 브라켓의 응력집중을 완화하여 응력분포를 균일하게 함으로서 안전율이 기준조건에 만족하는 결과를 얻었다. 이와 함께, 반복하중에 의한 피로수명 해석까지 진행하여 피로안전계수를 분석한 결과 내구성을 검증할 수 있는 결과를 얻었다.

진무탕(眞武湯)이 Gentamicin-유도 신독성에 미치는 영향 (Effects of Jinmootang on the Gentamicin-induced Nephrotoxicity in Rats)

  • 이규현;김길훤
    • 동의생리학회지
    • /
    • 제14권2호통권20호
    • /
    • pp.189-198
    • /
    • 1999
  • Aminoglycosides, including gentamicin, have been used as antibiotics for the various infections by gram-negative bacteria. However, there are some restrictions for using these drugs. Gentamicin, a typical aminoglycoside, has the side effect of nephrotoxicity, including polyuria, glycosuria, proteinuria, glomerulonephritis, and uremia. The aims of this study were to examine the prevention or reduction effects of Jinmootang on the gentamicin-induced nephrotoxicity and to investigate the possible mechanisms on the effect of Jinmootang. The subcutaneous injections of 60mg of gentamicin per kg of boby weight to Sprague-Dawley rats for 8 days induced typical symptoms of nephrotoxicity by aminoglycosides. 0.6ml of water extract Jinmootang (100ml/chup) was orally treated in the experimental animal. 24-hour urine was collected with the metabolic cage and plasma was sampled from the abdominal aorta. The plasma concentration of sodium was significantly decreased by the treatment of gentamicin but it was not-significantly changed by the treatment of Jinmootang to the animal. The concentration of potassium was greatly decreased in the gentamicin-treated animals. However. it was returned to the normal level in the Jinmootang-treated animals. The concentrations of creatinine and urea were increased by gentamicin treatment. But, Jinmootang reduced these concentrations. Nevertheless, the osmolalities of plasma in both group were not different from each other. Even though the plasma concentration of aldosterone was not significantly changed, the mean value was increased by the gentamicin intoxication. The concentration of aldosterone was decreased by the treatment of Jinmootang. The reduction of aldosterone level in plasma could be a factor to improve the hypokalemia. The fractional excretion of potassium was much higher than normal by the treatment of gentamicin and it was decreased by 50% in the Jinmootang-treated rats. Therefore, the reabsorption of potassium was significantly increased by the treatment of Jinmootang, even though the filtered load of potassium in the experimental group was much highter than control. Even though the concentration of plasma aldosterone was decreased by the treatment of Jinmootang, the fractional excretion of sodium was not increased, slightly lower. These data suggested that Na reabsorption was increased in the proximal tubule by Jinmootang. The filtered load of glucose in the Jinmootang-treated group was greater than in control. Nevertheless, the fractional excretion of glucose in the experimental group was not different from that in control. These results indicate that glucose reabsorption was increase in the proximal tubule by Jinmootang treatment. The results of this study suggest that Jinmootang could improve the some nephrotoxic symptoms induced by gentramicin treatment. Hypokalemia, the reduced glomerular filtration rate, and dysfunctions of renal proximal tubule and distal nephron were significantly recovered to normal level. The increase of glomerular filtration rate by Jinmootang might contribute to eliminate the waste product, including creatinine and urea, and/or gentamicin through the kidney.

  • PDF

V8형 디젤엔진의 성능에 미치는 분사계의 영향에 관한 연구 (A Study on Effects of Fuel Injection System on the Performance in a V8-Type Diesel Engine)

  • 박병학
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권2호
    • /
    • pp.248-256
    • /
    • 1998
  • The effects of fuel injection system on the performance in a V8-type diesel engine was stuided in this paper. Fuel injection system is important factor which influence the engine performance and exhaust emission bcasuse the properties in the injected fuel depend on the atomization characteristics. In this study using diesel engine of 17.7:1 compression ration the engine performance and exhaust emission are measured experimentally according to 1000, 1400, 2200rpm in the full-load conditions. The chosen parameters for the major system are such diameter shape of combustion chamber and intake system. The results are as follows: As the nozzle hole diameter and injection angle become smaller and as the injection timing gets advanced the fuel consumption and concentration of smoke are decreasing whereas concentration of $NO_{x}$ is increasing. Andconcentration of $NO_{x}$ is increasing in accordance with the increase of injection pipe diameter and nozzle protrusion. Also it is shown that re-entrant type combustion chamber is more effective than that of toroidal type in the improvement of $NO_{x}$ reduction.

  • PDF

Forward형 고압펄스 전원장치를 적용한 오존발생 시스템 의 개발 (Development of Ozone Generating System Applying Forward Type High Voltage Pulse Power Supply)

  • 김동희;원재선;김경식;이광식;정도영;오승훈
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권7호
    • /
    • pp.335-342
    • /
    • 2003
  • This paper presents a forward type high voltage pulse power supply for high voltage small current, which can be designed as a simple circuit configuration and managed easily using Power-MOSFET in the view of commercialization. According to the switching frequency, coupling factor(k) and duty ratio(D), the Principle of basic operation and the characteristics of the proposed pulse power supply are estimated. Simulation results have demonstrated the feasibility of the proposed pulse power supply. Also experimental results are presented to verify theoretical discussion with a lamp type ozonizer as a load. For studying the application at the part of environment of water, When ozonizer gas reacts with a colon bacillus, the sterilization characteristics of a colon bacillus according to the ozone concentration and response time have been investigated. This proposed pulse power supply will be able to be practically used as a pulse power supply in various environment improvement facilities like sterilization of colon bacillus, deodorization, and Nox gas elimination.

다양한 각도의 곡관 내에서 아이스슬러리의 유동에 따른 영향 (Effect on Ice Slurry Flowing in the Elbow of Various Angle)

  • 김규목;박기원;권일욱
    • 설비공학논문집
    • /
    • 제16권2호
    • /
    • pp.142-149
    • /
    • 2004
  • Recently, the government introduced the thermal storage system for reducing the electric power load. Especially, the ice slurry type has gained lots of interest due to its good heat transfer and flowing characteristics. This study was peformed to understand the effects of transporting ice slurry through elbows of various angle. Propylene glycol water solution was used and about 2 mm ice particles were circulated. The experiments were carried out under various conditions, such as concentration and velocity of water solution ranging between 0∼20 wt%, 1.5∼2.5 m/s, respectively. And elbows with 4 different angles of 30$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 180$^{\circ}$. The differential pressure and IPF (ice packing factor) between the pipe entry and exit were measured. The tendency of pressure loss and outlet IPF in elbow is that the pressure loss was reduced as concentration and flow velocity of water solution is increased, and low value appeared at 10 wt% and 2.5 m/s. The variation of outlet IPF was compared with the inlet IPF in the range of $\pm$20%.

3D-ESPI System을 이용한 응력집중부의 변형률 측정기법 연구 (The Research of the Strain Measuement Method on the Stress Concentration Area using 3D-ESPI System)

  • 김경수;심천식;전종욱;김덕호
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.150-153
    • /
    • 2001
  • In this paper, the tensile test of three kinds of the specimens was performed. Type I specimen is without notch and type II, III specimens have a radius of semi-circular edge crack of 2.5mm, 4.0mm. The tensile load(20kN and 30kN) was applied to the specimen by Universal Testing Machine. 3D-ESPI system and strain gauge measured simultaneously the strain in the center of the specimen and near the edge crack. The test results were compared with each other. Moreover, the stress concentration factor based on geometric information was calculated to confirm the accuracy of the strain measured by 3D-ESPI system. The calculated strain was compared with the measured one by 3D-ESPI system. As a result, it was confirmed that 3D-ESPI system measured the right strain near the semi-circular edge crack of the specimens.

  • PDF

GPS-X 시뮬레이션을 이용한 적정 연계처리부하량 분석 (Analysis of Proper Linked Treatment Load Using GPS-X Simulation)

  • 김성지;이지원;길경익
    • 한국습지학회지
    • /
    • 제21권3호
    • /
    • pp.244-250
    • /
    • 2019
  • 급격한 산업발전과 인구증가로 인해 최근 지자체 및 하수처리장에서 하수처리장으로 연계하여 처리하는 연계처리수가 많은 문제를 나타내는 것으로 조사되었다. 연계처리수는 일반하수대비 저유량 고농도의 특성을 가지고 있다. 따라서 이러한 특성은 공공하수처리시설의 하수처리 난이도 및 하수처리 단가를 증가시키는 영향을 미친다. 하수처리단가를 증가시키는 많은 영향인자 중 '연계처리부하/설계유입수부하(%)'가 가장 상관성이 높은 인자로 도출되었고, 그 후 공공하수처리시설 선정 및 모델링을 통해 4계절의 영향을 고려한 온도 조건 및 '연계처리부하/설계유입수부하(%)' 증가 조건에 따른 설계방류수질 초과 범위를 조사했다. 그 결과 TN의 경우 $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$ 조건에서 각각 '연계처리부하/설계유입부하(%)'가 각각 19.7%, 22.6%, 25.1%. 27.7%로 나타났고, TP의 경우 $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$ 조건에서 각각 '연계처리부하/설계유입부하(%)'가 각각 10.7%, 12.2%, 15.6%, 17.5%로 조사되었다.

노치부의 피로균열발생 수명 비교 (The comparison of the fatigue crack initiation life in a notch)

  • 김성훈;배성인;함경춘;송정일
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.217-222
    • /
    • 2001
  • For the life evaluating of notched members, it is the best way that performing the real fatigue test of structure containing notch. But this method required generally much times and costs to evaluate fatigue life. So, generally we use the modified S-N curve or several methods to predict fatigue life. In this study, crack initiation life was evaluated by fatigue testing the SAE keyhole specimen and smooth specimen made of Al 7075-T6 alloys using the constant load then obtained S-N curve of smooth specimen and P-N curve of SAE keyhole specimen. And, fatigue lives of keyhole specimen are predicted using some life prediction methods (Nominal range I method, Nominal range II method, FEM analysis) for investigating experimented results, and that were compared with experimental data. Predicted fatigue lives by FEM analysis were corresponded with experimental data between 1/3times and 3times on the whole, and predicted fatigue lives using modified S-N curve (Nominal range I method, Nominal range II method) were nonconservative compared with that of FEM analysis.

  • PDF

램프형 오존발생기용 Foward형 고압 펄스전원장치의 특성개선 (Characteristic improvement of the forward type high voltage pulse power supply for Lamp Type Ozonizer)

  • 김경식;원재선;김동희;노채균;남승식;심광열
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 B
    • /
    • pp.1117-1119
    • /
    • 2001
  • This paper describes the forward type pulse power supply using a Power-MOSFET in the view of commercialization. The principle of basic operating and the operating characteristics of the forward type pulse power supply are estimated by the switching frequency, coupling factor and duty ratio. It is shown that theoretical and experimental results are in good agreement by comparing simulation and experimental results when a lamp type ozonizer can be used as a load. Also, experimental results indicate that the discharge and ozone concentration characteristics of the manufactured pulse power supply is more improved compare to the conventional pulse power supply[5]. This proposed supply show that it can be practically used as a pulse power supply in various environment improvement facilities.

  • PDF