• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.819-837
• /
• 2014

Data centers, which implement cloud service, have been faced up with quick growth of energy consumption and low efficiency of energy. 60GHz wireless communication technology, as a new option to data centers, can provide feasible approach to alleviate the problems. Aiming at energy optimization in 60GHz wireless data centers (WDCs), we investigate virtualization technology to assign virtual resources to minimum number of servers, and turn off other servers or adjust them to the state of low power. By comprehensive analysis of wireless data centers, we model virtual network and physical network in WDCs firstly, and propose Virtual Resource Mapping Packing Algorithm (VRMPA) to solve energy management problems. According to VRMPA, we adopt packing algorithm and sort physical resource only once, which improves efficiency of virtual resource allocation. Simulation results show that, under the condition of guaranteeing network load, VPMPA algorithm can achieve better virtual request acceptance rate and higher utilization rate of energy consumption.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.2
• /
• pp.93-98
• /
• 2008

Steel fibre reinforced concrete (SFRC) were considered a new technology for the construction industry. However today this technology has found wider acceptance among the construction industry. Currently, steel fibres are used in varied segments in many application areas across different segments in the construction industry, especially in tunneling, airports, warehouses, etc. Time and safety are the main factors are among the various advantages which renders steel fibres superior to the competing product. For fibers reinforcing, The maximum load carrying capacity is controlled by fibers pulling out of the composite because fiber reinforcing does not have a deformed surface like larger steel reinforcing bars. The study demonstrated that above concept is applicable and effective in concrete structure by analytical study. The analytical result appears that SFRP have the potential to significantly increase the strength of existing concrete structures, while at the same time dramatically improving their fracture energy characteristics.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.28-37
• /
• 2006

State-dependent call admission control (SDCAC) is proposed to make efficient use of scarce wireless resource in a hierarchical wireless network with heterogeneous traffic. With SDCAC, new calls are accepted according to an acceptance probability taking account of not only cell dwell time but also call holding time and system state (i.e., occupied bandwidth). An analytical method is developed to calculate performance measures of interest, e.g., new call blocking probability, forced termination probability, over. all weighted blocking probability. Numerical results with not only stationary but nonstationary traffic loads are presented to show the robustness of SDCAC. It is shown that SDCAC performs much better than the other considered schemes under nonstationary traffic load.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1239-1243
• /
• 2009

To evaluate the structural integrity of the nuclear seismic category penetration cooling water pump under the seismic service conditions the seismic analysis was performed in accordance with IEEE-STD-344 code. The finite element computer program, ANSYS, Version 10.0, is used to perform both a mode frequency analysis and an equivalent static seismic analysis of the pump assembly. The mode frequency analysis results show the fundamental natural frequency is greater than 33 Hz and does not exist in seismic range, thus justifying the use of the static analysis. The stresses resulted from various loadings and their combinations are within the allowable limits specified in the above mentioned IEEE code. The results of the seismic evaluation fully satisfied the structural acceptance criteria of the IEEE code. Accordingly the structural integrity on the pump assembly was proved.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.86-91
• /
• 2000

Numerical simulation of sheet metal forming for panels as other components has wide acceptance in the automotive industry. Therefore this paper was focused in the drawability factors (which are friction coefficient , radius of die and punch ) on the square cup deep drawing by the explicit finite elements code $PAM-STAMP^{TM}$. The computed results are compared with the experimental results to show the validity of the analysis. In order to compare the simulation results with the experiment results and predict the effect of drawability factors, the relationships between punch load punch stroke, and the relationships between thickness strain and distance are used. According to this study, the results of simulation by using $PAM-STAMP^{TM}$ will give engineers good information to access the drawability of square drawing.

• International Journal of Safety
• /
• v.10 no.2
• /
• pp.1-5
• /
• 2011

The structural integrity assessment of APR1400 (Advanced Power Reactor 1400) reactor vessel internals has been being performed referring the US Nuclear Regulatory Commission regulatory guide 1.20 comprehensive vibration assessment program prior to commercial operation. The program is composed of a hydraulic and structural analysis, a vibration measurement, and an inspection. This paper describes the hydraulic and structural analysis on the reactor vessel internals due to hydraulic loads caused by the turbulence of reactor coolant. Three-dimensional models were built for the hydraulic and structural analysis and then hydraulic loads and structural responses were predicted for five analysis cases with CFX and ANSYS respectively. The structural responses show that the APR1400 reactor vessel internals have sufficient structural integrity in comparison with the acceptance criteria.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2B
• /
• pp.149-152
• /
• 2012

This study is carried out to analyze the design method and safety rate degree for IEC 61400-3, DNV-OS-J101, GL Wind, EUROCODE, AASHTO and domestic design standard used for offshore wind turbine foundation design. The findings will provide a design parameter for domestic offshore wind turbine foundation design. The design of the steel Support Structure of an offshore wind turbine can be based on either the Allowable Stress Design(ASD) approach or the Load and Resistance Factor Design(LRFD) approach. The design principles with the use of LRFD method are described with various limit states. A limit state is a condition beyond which a structure or part of a structure exceeds a specified design requirement. Design by the LRFD method is a design method by which the target component safety level is obtained by applying load and resistance factors to characteristic reference values of loads (load effects)and structural resistance. When the strength design of the steel Support Structure is based on the ASD approach, the design acceptance criteria are to be expressed in terms of appropriate basic allowable stresses in accordance with the requirements specified. After comparison an economics domestic offshore wind turbine foundation standard will be developed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.295-304
• /
• 2000

To evaluate the structural integrity for the strainer under seismic loading the seismic analysis and design were performed for T-type strainer in accordance with ASME, Section Ⅲ, Class 3(ND). Since there are no specified design requirements for the strainer in ASME Code, the strainer body was analysed according to ND-3500, valve design. Flanged joints connected with PCS piping were designed according to ND-3658.3. And the criteria for the cover flange was governed by the Appendix XI. Both a frequency analysis and an equivalent static seismic analysis of the strainer were carried out using the finite element computer program, ANSYS. The frequency analysis results show the fundamental natural frequency is greater than 33Hz, thus justifying the use of the equivalent static analysis through which membrane and bending stresses are obtained in the critical points near the branch connection area. The results of the seismic evaluation fully satisfied with the structural acceptance criteria of the ASME Code. Accordingly the structural integrity on the strainer body and flanges were proved.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.1
• /
• pp.77-88
• /
• 2007

More flexible learning models are needed, and learning environments that operate through mobile technologies such as portable multimedia players(PMP) provide useful tools in implementing these learning models. The main attractant of PMP is often their versatility: being able to load and play different formats of video, audio, digital images, and interactive media. In this paper, we investigate the factors influencing the usage and acceptance of the PMP for study, based on the extended version of the Technology Acceptance Model (TAM). Based on data collected from online survey, we show that perceived usefulness, perceived ease of use, flow and perceived enjoyment are the major determinants for users to play PMP for study purpose. Factors, including ease of use, contents-credibility are shown to determine the level of perceived usefulness; additionally, perceived usefulness, ease of use and perceived enjoyment are shown to directly affect the level of flow. Based upon the statistical results, some useful guidelines for developing learning contents are also provided.

• Journal of Broadcast Engineering
• /
• v.27 no.3
• /
• pp.415-436
• /
• 2022

This study was conducted by the customer survey of 15 to 65 years old in order to identify the user behavioral effects of perception and characteristics on the common essential applications of smartphones with the United Theory of Acceptance and Use of Technology (UTAUT) and Value-based Acceptance Model (VAM). As a result, it was found that performance expectancy, enjoyment, facilitating conditions, effort expectancy, and social influences, excluding information privacy concern, have a positive effect on use behavior. The moderating effect by age was found that the youth was higher between perceived value and behavioral intention, and the middle-aged was higher between enjoyment and perceived value. This study has significance in providing implications for establishing strategies on designing and pre-loading apps, and increasing usage rate.