• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.74-80
• /
• 2001

Because of ocean waves, swell, steering corrections, etc, the hydrophones of a towed array will not live along a straight line. However the degradation of bearing estimation performance occurs when beamforming is carried out on the hydrophone outputs of an acoustic towed array which is not straight. So it is required to estimate the shape of the array for the improved beamformer output. In this paper, an iterative array shape estimation technique is presented, which is based on the use of the least squares polynomial fitting to the data from heading sensors. The estimation error and the influence of deformations on the performance of the conventional beamformer output are investigated. Finally, the suggested method is applied to the real system in order to investigate the applicability.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1328-1334
• /
• 2015

A new system for evaluating the voltage management errors of distribution equipment is presented in this paper. The main concept of the new system is to use real distribution live-line voltage to evaluate and correct the voltage measurement data from distribution equipment. This new approach is suitable for a new Distribution Management System (DMS) which has been developed for a distribution power system due to the connection of distributed generation growth. The data from distribution equipment that is installed at distribution lines must be accurate for the performance of the DMS. The proposed system is expected to provide a solution for voltage measurement accuracy assessment for the reliable and efficient operation of the DMS. An experimental study on actual distribution equipment verifies that this voltage measurement accuracy assessment system can assess and calibrate the voltage measurement data from distribution equipment installed at the distribution line.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.6
• /
• pp.629-634
• /
• 1997

An experiment was conducted to investigate the effects of equiprotein replacement of dietary fish meal (FM) with duckweed (DW) and soybean meal (SBM) on the performance of broilers. A total of 112 seven-day-old as hatched broilers were fed on 4 different iso-energetic (2,818 kcal/kg) and iso-nitrogeneous (20.2% CP) diets up to 56 days of age. Diet A was control with 12% FM. In diets B (3% DW + 13.5% SBM), C (6% DW + 11.5% SBM) and D (9% DW +10% SBM). All FM protein of control diet was replaced by DW and SBM. The replacement of dietary FM by DW and SBM depressed feed intake, live weight gain and feed conversion efficiency and increased production cost and thus affected profitability. All those growth parameters had a linear declining trend as the proportion of DW in the diet was increased. It may be concluded that complete replacement of dietary FM by DW and SBM should not be recommended for raising broilers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.828-833
• /
• 2002

Thirty mature pregnant ewes of the Phan Rang breed with an initial live weight of 30 to 45 kg were used to compare the effects of three different diets in late pregnancy on ewe and lamb performance. All diets contained 20% of whole sugar cane, 16% rice bran, 26% cassava root and 6% molasses urea block. The remaining 32% of dry matter consisted of Jackfruit (JF diet), 16% each of Jackfruit and Cassava foliage (JF+CS diet) or Jackfruit and Flemingia foliage (JF+FM diet). The diets were fed at 3.5% of actual BW of the individual animal. The foliages were offered at 120% of the amount decided in the diets of the requirements. The JF+CS diet resulted in significantly higher feed intake than the JF diet, and also a higher feed intake than the JF+FM diet, but this difference was not significant. The ewe weight changes during the last 8 weeks of pregnancy, or from start to 24 h after lambing, were significantly different. The highest weight gain was obtained from the ewes fed the JF+CS diet. Diets had no effect on weight changes of ewes during 3 weeks after lambing but a significant effect on the litter birth weight, with the JF+CS diet giving the highest litter birth weight. There was, however, no effect on the litter weight at 21 days or litter growth rate from birth to 21 days due to the experimental diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.3
• /
• pp.425-430
• /
• 2006

Three hundred and sixty sexed 3-day-old broiler chicks were divided randomly into six treatment groups (control, antibiotic and black cumin at four levels) of 60 birds each. Black cumin seeds at 0.5%, 1%, 2% or 3% and avilamycin at 10 mg/kgt were added to the basal diet and their effects determined on feed intake, daily live weight gain, feed conversion ratio and carcass characteristics. There were no significant differences in daily feed intake at 21 and 42 days (p>0.05). Average daily gain was significantly different between the treatments. The birds fed the diet containing 1% black cumin seeds and antibiotic were the highest average daily gain, followed by those the other treatment diets and negative control (p<0.05). From 1 to 42 days of age, feed conversion ratios were improved significantly by supplementation with 1% black cumin seeds and with antibiotic (p<0.05) by approximately 5% compared to the control group. Similarly, the highest cold carcass, thigh, breast, wing, neck and liver weights were observed in the 1% black cumin and antibiotic groups (p<0.05). Accordingly, 1% supplementation of black cumin seeds to diets could be considered as an alternative natural growth promoter for poultry instead of antibiotics.

• Structural Engineering and Mechanics
• /
• v.39 no.4
• /
• pp.521-539
• /
• 2011

Jilin highway concrete bridge is located in the center of Jilin City, which is positioned in the middle part in Jilin Province in the east north of China. This bridge crosses the Songhua River and connects the north and the south of Jilin City. The main purpose of damages inspection of the bridge components is to ensure the safety of a bridge and to identify any maintenance, repair, or strengthening which that need to be carried out. The damages that occur in reinforced concrete bridges include different types of cracks, scalling and spalling of concrete, corrosion of steel reinforcement, deformation, excessive deflection, and stain. The main objectives of this study are to inspect the appearance of Jilin highway concrete bridge and describe all the damages in the bridge structural members, and to evaluate the structural performance of the bridge structure under dead and live loads. The tests adopted in this study are: (a) the depth of concrete carbonation test, (b) compressive strength of concrete test, (c) corrosion of steel test, (d) static load test, and (e) dynamic load test. According to the damages inspection of the bridge structure appearance, most components of the bridge are in good conditions with the exception arch waves, spandrel arch, deck pavement of new arch bridge, and corbel of simply supported bridge which suffer from serious damages. Load tests results show that the deflection, strain, and cracks development satisfy the requirements of the standards.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.3
• /
• pp.123-127
• /
• 2008

The paper is to solve the problem of existing audio signal transfer system which has a difficulties of system organization and the increase of additional install cost and unfriendly interior. To solve the existing system, we drew the new audio signal transfer system based on PLC and evaluated it. A transmitter and a receiver were designed using the PLC chip INT5500CS. An audio signal transfer system was configured with a CD player to which audio signals are sent from the transmitter and a speaker connected to the receiver. For performance evaluation of this system, a USBPre external sound card and Smaart Live 5 which is a PC-based sound measuring program were added. As a result of our experiment, the measured signal level is $2{\sim}3$ dB lower than reference signal, latency is 16.69 ms, and the specific character of coherency is bad in high frequency band. Otherwise, this system transmits and receives signals over 90 % in good condition as a result of measuring pink noise, frequency (1 kHz), and phase, magnitude. In view of the result so far achieved, the system designed this study has excellent performance, it resolves defect of existing audio signal transfer system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1998-2003
• /
• 2007

A flexible but implantable polyimide-based neural implant was fabricated for reliable and stable long-term monitoring of neural activities from brain. The developed neural implant provides 3-dimensional (3D) $3{\times}3$ structure, avoids any hand handling, and makes the insertion more efficient and reliable. Any film curvature caused by residual stress was not observed in the electrode. The 3D flexible polyimide electrode penetrated a dense gel whose stiffness is close to live brain tissue, because a ${\sim}1{\mu}m$ thick nickel was electroplated along the edge of the shank in order to improve the stiffness. The recording sites were positioned at both side of the shank to increase the probability of recording neural signals from a target volume of tissue. Impedance remained stable over 72 hours because of extremely low moisture uptake in the polyimide dielectric layers. At electrical recording test in vitro, the fabricated electrode showed excellent recording performance, suggesting that this electrode has the potential for great recording from neuron firing and long-term implant performance.

• 한국HCI학회:학술대회논문집
• /
• 2008.02c
• /
• pp.224-224
• /
• 2008

Recent advances in model acquisition, computer-aided design, and simulation technologies have resulted in massive databases of complex geometric data occupying multiple gigabytes and even terabytes. In various graphics/geometric applications, the major performance bottleneck is typically in accessing these massive geometric data due to the high complexity of such massive geometric data sets. However, there has been a consistent lower growth rate of data access speed compared to that of computational processing speed. Moreover, recent multi-core architectures aggravate this phenomenon. Therefore, it is expected that the current architecture improvement does not offer the solution to the problem of dealing with ever growing massive geometric data, especially in the case of using commodity hardware. In this tutorial, I will focus on two orthogonal approaches--multi-resolution and cache-coherent layout techniques--to design scalable graphics/geometric algorithms. First, I will discuss multi-resolution techniques that reduce the amount of data necessary for performing geometric methods within an error bound. Second, I will explain cache-coherent layouts that improve the cache utilization of runtime geometric applications. I have applied these two techniques into rendering, collision detection, and iso-surface extractions and, thereby, have been able to achieve significant performance improvement. I will show live demonstrations of view-dependent rendering and collision detection between massive models consisting of tens of millions of triangles on a laptop during the talk.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1240-1242
• /
• 1996

In a still mill, the effective surface defect inspection algorithm is necessary. For this purpose, this paper proposed the preprocessing algorithm for surface defect inspection of cold mill strip. This consists of live steps. They are edge detection, binarizing, noise deletion, combining of fragmented defect and selecting the largest defect. Especially, binarizing is a critical problem. Bemuse the performance of the preprocessing is largely depend on the binarized image. So, we develope the adaptive thresholding method, which is multilevel thresholding. The thresholding value is varied according to the mean graylevel value of each test image. To investigate the performance of the proposed algorithm, we classified the detected defect using neural network. The test image is 20 defect images captured at German Sick Co. This algorithm is proved to have good property in cold mill strip surface inspection.