• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1144-1148
• /
• 2002

We prepared the polyaniline (Pani) film and powder by chemical polymerization and doping with different dopants and also investigated the capability of Li//polyaniline cells after assembling. The oxidation/reduction potentials and electrochemical reaction of Li//polyaniline cells were tested by cyclic voltammetry technique. The Li//Pani-HCl cells with 10% and 20% conductors show a little larger specific discharge capacities than that without conductor. The highest discharge capacity of almost 50 mAh/g at 100th cycle is also achieved. However, Li//Pani-LiPF6 with 20% conductor shows a remarkable performance of ~90 mAh/g at 100th cycle. This is feasible value for using as the positive electrode material of lithium ion secondary batteries. It is also proved that the powder type electrode of Pani is better to use than the film type one to improve the specific discharge capacity and its stability with cycle.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제34권1호
• /
• pp.6-10
• /
• 2017

Dissolution of Antheraea yamamai silkworm cocoon was carried out in various solvent systems with various dissolving conditions including dissolution salts, salt concentration, dissolving temperature, and time. General chaotropic salt for Bombyx mori silk fibroin does not work for A. yamamai silkworm cocoon. Lithium bromide 9.3 M at $100^{\circ}C$ also does not work to dissolve wild silkworm cocoon. However, 9 M of lithium thiocyanate treatment at $100^{\circ}C$ induced 100% dissolution of wild silkworm cocoon. But it could not be dissolved lower than $60^{\circ}C$. Like lithium thiocyanate, less than $60^{\circ}C$ treatment with molten calcium nitrate 4 hydrate could not dissolve wild silkworm cocoon. As the dissolution temperature increased up to $100^{\circ}C$, the solubility of wild one was reached over 90%. SDS-PAGE showed broad tailing stream pattern that means the molecule of wild silk was depolymerized with dissolution temperature and time. From the above results, the best chaotropic salt for A.yamamai silkworm cocoon is calcium nitrate 4 hydrate.

• 전기화학회지
• /
• 제5권4호
• /
• pp.178-182
• /
• 2002

The electrochemical behavior of binder-free carbon anode, comprising of only artificial and natural graphite (AG and NG) particles, for intercalation and deintercalation of lithium ion $(Li^+)$ in aluminum chloride (AICI_3)-I-ethyl­3-methylimidazolium chloride (EMIC)-lithium chloride (LiCl)-thionyl chloride $(SOCI_2)$ room-temperature molten salt (RTMS) was studied. Binder-free carbon electrodes were fabricated using electrophoretic deposition (EPD) method. The binder-free carbon anodes provided a relatively flat charge and discharge potentials $(0\;to\;0.2V\;vs.\;Li/Li^+)$ and current capabilities $(250-340mAh{\cdot}g^{-1})$ for the intercalation and deintercalation of $Li^+$. Stability of the binder-free carbon anodes for intercalation and deintercalation of 50 cycles was confirmed.

• Bulletin of the Korean Chemical Society
• /
• 제7권1호
• /
• pp.66-69
• /
• 1986

The reaction of potassium trialkoxyborohydrides of varying steric requirements with lithium chloride in tetrahydrofuran(THF) was examined in detail to establish the generality of this synthesis of the corresponding lithium trialkoxyborohydrides. The metal ion exchange reaction between potassium triisopropoxyborohydride and lithium chloride in THF proceeded instantly at room temperature and the corresponding lithium salt was very stable toward disproportionation. However, for R = s-Bu, t-Bu and 2-methylcyclohexyl, with increasing steric requirement, the lithium derivatives were unstable and thus dissociated into $(RO)BH_3^-\;and\; (RO)_4B^-$. The stereoselectivity of lithium triisopropoxyborohydride(LIPBH) in the reduction of representative cyclic ketones was examined and compared with that of the potassium derivative.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.78-89
• /
• 2022

ANODE-free Li-metal batteries (AFLMBs) operating with Li of cathode material have attracted enormous attention due to their exceptional energy density originating from anode-free structure in the confined cell volume. However, uncontrolled dendritic growth of lithium on a copper current collector can limit its practical application as it causes fatal issues for stable cycling such as dead Li formation, unstable solid electrolyte interphase, electrolyte exhaustion, and internal short-circuit. To overcome this limitation, here, we report a novel dual-salt electrolyte comprising of 0.2 M LiPF₆ + 3.8 M lithium bis(fluorosulfonyl)imide in a carbonate/ester co-solvent with 5 wt% fluoroethylene carbonate, 2 wt% vinylene carbonate, and 0.2 wt% LiNO₃ additives. Because the dual-salt electrolyte facilitates uniform/dense Li deposition on the current collector and can form robust/ionic conductive LiF-based SEI layer on the deposited Li, a Li/Li symmetrical cell exhibits improved cycling performance and low polarization for over 200 h operation. Furthermore, the anode-free LiFePO₄/Cu cells in the carbonate electrolyte shows significantly enhanced cycling stability compared to the counterparts consisting of different salt ratios. This study shows an importance of electrolyte design guiding uniform Li deposition and forming stable SEI layer for AFLMBs.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.867-874
• /
• 2015

Separation of cesium chloride (CsCl) and strontium chloride ($SrCl_2$) from the lithium chloride-potassium chloride (LiCl-KCl) salt was studied using a melt crystallization process similar to the reverse vertical Bridgeman growth technique. A ternary $SrCl_2-LiCl-KCl$ salt was explored at similar growth rates (1.8-5 mm/h) and compared with CsCl ternary results to identify similarities. Quaternary experiments were also conducted and compared with the ternary cases to identify trends and possible limitations to the separations process. In the ternary case, as much as 68% of the total salt could be recycled per batch process. In the quaternary experiments, separation of Cs and Sr was nearly identical at the slower rates; however, as the growth rate increased, $SrCl_2$ separated more easily than CsCl. The quaternary results show less separation and rate dependence than in both ternary cases. As an estimated result, only 51% of the total salt could be recycled per batch. Furthermore, two models have been explored to further understand the growth process and separation. A comparison of the experimental and modeling results reveals that the nonmixed model fits reasonably well with the ternary and quaternary data sets. A dimensional analysis was performed and a correlation was identified to semipredict the segregation coefficient.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.11-15
• /
• 2017

Lithium-ion batteries are widely used, from lightweight to energy-intensive, from small devices to large ESSs. However, it is sensitive to the surrounding environment and there is a change in performance depending on the temperature change. In this study, the temperature dependence of the charge / discharge characteristics of the battery is shown through simulation and the distribution of the salt concentration in the electrolyte is observed when the sudden temperature change is applied.

• 폴리머
• /
• 제27권4호
• /
• pp.385-391
• /
• 2003

본 연구에서는 에틸렌 옥사이드의 반복 단위 길이 (n＝3, 7.3, 11.8, 그리고 16.3)가 다른 리튬 p-［메톡시 올리고(에틸렌옥시)］벤젠설폰산염 (LiEOnBS)을 합성하였다. 이 전해질 염을 이용하여 고분자 전해질을 제조하였으며, 에틸렌 옥사이드의 반복 단위 길이 및 농도에 따른 이온 전도도 그리고 리튬 이온의 운반율에 대해 조사하였다. 고분자 전해질의 이온 전도도는 3$0^{\circ}C$에서 4.89$\times$$10^{-4}$ S/cm (LiEO7.3BS, 0.5 M)로 최고 이온 전도도를 보였다. Dc분극과 ac 임피던스를 혼합하여 측정한 고분자 전해질의 리튬 이온의 운반율은 0.75~0.92 이였으며, 농도가 증가할수록 리튬 이온 운반율은 감소하였다. LiEO7.3BS의 전해질 염을 0.1 M로 사용한 고분자 전해질인 경우 0.92로 최고의 리튬 이온 운반율을 보였다. 이로부터 벤젠설포네이트에 치환된 에틸렌 옥사이드의 반복 단위가 3이상만 되어도 높은 리튬 이온 운반율을 가지는 단일 이온 전해질 특성을 보임을 알 수 있었다.

• 전기화학회지
• /
• 제13권2호
• /
• pp.110-115
• /
• 2010

The plasticized polymer electrolytes based on polyvinylidene fluoride-co-hexafluoropropylene (P(VdF-co-HFP)), tetra (ethylene glycol) dimethyl ether (TEGDME), and lithium perchlorate ($LiClO_4$) are prepared for the lithium sulfur batteries by solution casting with a doctor-blade. The polymer electrolyte with EO : Li ratio of 16 : 1 shows the maximum ionic conductivity, $6.5\;{\times}\;10^{-4}\;S/cm$ at room temperature. To understand the effect of the salt concentration on the electrochemical performance, the polymer electrolytes are characterized using electrochemical impedance spectroscopy (EIS), infrared spectroscopy (IR), viscometer, and differential scanning calorimeter (DSC). The optimum concentration and mobility of the charge carriers could lead to enhance the utilization of sulfur active materials and the cyclability of the Li/S unit cell.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 춘계 총회 및 학술발표회
• /
• pp.69-72
• /
• 2004

So far the most practical polymer electrolytes are gel systems, which contain a polymeric matrix, a lithium salt, and aprotic organic solvents. This has met with success but has had disadvantages that the addition of solvents promotes deterioration of the electrolyte's mechanical properties and increases its reactivity towards the lithium metal anode.[1](omitted)