• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.96-99
• /
• 1993

Electrical properties of the Thin Film Transistor(TFT) electrode metal films were investigated through the Test Elements Group(TEG) experiment. The main purpose of this investigation was to characterize the electrical resistance properties of patterned metal films with respect to the variations of film thickness and TEG metal line width. Aluminum(Al), Tantalum(Ta) and Chromium(Cr) that are currently used as TFT electrode films were selected as the probed metal films. To date, no work in the electrical characterizations of patterned electrodes of a-Si TFT was accomplished. Bulk resistance$(R_b)$, sheet resistance$(R_s)$, and resistivities($\rho$) of TEG patterned metal lines were obtained. Electrical continuity test of metal film lines was also performed in order to investigate the stability of metallization process. Almost uniform-linear variations of the electrical properties with respect to the metal line displacements was also observed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.4
• /
• pp.42-48
• /
• 2000

Generally an operator would take notice at putting a patient under anesthesia. If the operation is executed in mistake, the patient is exposed to danger. The object of this Paper is that a system is developed for an accuracy of system and a convenience of user interface to prevent an operation of several elements of risk by mistake. The part of electrical system particularly is made for convenience of a manipulation using electrical switch and encoder. A real-time monitoring system is developed for an airway pressure and a gas concentration of carbon dioxide of patient using graphic LCD(liquid crystal display). Moreover, this flow control system could be developed control with accuracy by feedback control method. This is implemented using flow control valve and flow sensor. The implemented system gives convenience and precision of a manipulation of variable value using developed technique. This system shows guaranteed stabilization and confidence of anesthesia ventilator by notifying us that patient's state and information in case of being out of alarm range of variable value.

• Imaging Science in Dentistry
• /
• v.41 no.1
• /
• pp.11-16
• /
• 2011

Purpose : The aim of this study was to evaluate the effect of liquid crystal display (LCD) monitor type and observer experience on the diagnostic performance in soft-copy interpretations of maxillary sinus inflammatory lesions on panoramic radiographs. Materials and Methods : Ninety maxillary sinuses on panoramic images were grouped into negative and positive groups according to the presence of inflammatory lesions, using CT for confirmation. Monochrome and color LCDs were used. Six observers participated and ROC analysis was performed to evaluate the diagnostic performance. The reading time, fatigue score, and inter-/intra-observer agreements were assessed. Results : The interpretation of maxillary sinus inflammatory lesions was affected by the LCD monitor type used and by the experience of the observer. The reading time was not significantly different, however the fatigue score was significantly different between two LCD monitors. Inter-observer agreement was relatively good in experienced observers, while the intra-observer agreement for all observers was good with monochrome LCD but not with color LCD. Conclusion : The less experienced observers showed lowered diagnostic ability with a general color LCD.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.251-257
• /
• 2017

In this paper, an algorithm for detecting defects in thin-film-transistor liquid-crystal display (TFT-LCD) cell images is presented. TFT-LCD cell images typically contain periodic cell patterns that make it difficult to detect defects. We propose an efficient and powerful algorithm for eliminating the cell patterns using magnitude spectrum analysis. The first step was to obtain a spectrum for a cell image using the Fourier transform while eliminating larger coefficients using an adaptive filter. Next, an image without the cell pattern was obtained by using the inverse Fourier transform. Finally, the defect pixels were detected using the STD algorithm. The validity of the proposed method was investigated using real TFT-LCD cell images. The experimental results indicate that the proposed technique is extremely effective for detecting defects in TFT-LCD cell images.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.75-76
• /
• 2006

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LCP (Light Guide Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50{\sim}200{\mu}m$ in diameter on it by erosion method. But the surface of the erosion dots of LGP is very rough due to the characteristics of the erosion process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current dot patterned LGP, optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. Especially, the negative and positive micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different pattern conditions to the brightness distribution of BLU with micro-lens patterned LGP. Finally, negative micro-lens patterned LGP showed superior results to the one made by positive in average luminance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.361-362
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD (Liquid Crystal Display) transfer system. In this paper, the 1st DOE (Design of Experiment) is conducted to find out main-effect factors fur the design of gripper part. Thirty-six experiments are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The 2nd DOE is conducted to obtain RSM (Response Surface Method) equation. The CCD (Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level reliability, the standard deviations of design parameters are shown to be controlled within 5% of average design value.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.254-254
• /
• 2011

현재 AMLCD(Active Matrix Liquid Crystal Display)는 노트북, 컴퓨터, TV등 여러 영상매체에 있어 가장 많이 활용되고 있는 디스플레이로 손꼽힌다. AMLCD에 구동소자로 사용되는 a-Si:H TFT는 낮은 제조비용과 축적된 기술을 바탕으로 가장 많이 쓰이고 있다. 특히 a-Si이 가지는 소형화나 대형화의 편의성은 모바일 기기, projection TV, 광고용 패널 등 적용분야가 점점 넓어지고 있는 추세이다. 하지만 a-Si라는 물질 자체가 가지는 낮은 이동도는 더 많은 application을 위해 해결되어야 할 과제이다. 낮은 이동도는 a-Si 실리콘 원자간 결합의 불규칙성 및 무질서와 dangling bond에 의한 localize state(deep trap, band tail)의 존재 때문에 발생하며 결과적으로 TFT 소자의 특성의 저하를 가져온다. 앞선 연구에서는 carrier이동도의 개선을 위해서 첫 번째로 insulator층과 active층 사이의 계면 상태를 향상시키기 위해 insulator로 쓰이는 a-SiN층 표면에 0~18 sccm의 유량으로 phosphorus를 주입하였다. AFM분석을 해본 결과 phosphorus를 주입함으로써 계면의 roughness가 줄어드는 것을 확인 할 수 있었다. 이러한 계면의 roughness 감소는 표면 산란(surface scattering)및 전자 포획(trap)의 영향을 줄임으로써 이동도의 향상을 가져왔다. 두 번째로 active층으로 쓰이는 a-Si:H 층의 표면에 phosphorus를 0?9sccm의 유량으로 doping하였다. 이로 인해 channel이 형성되는 active 영역에 직접적으로 불순물을 doping됨으로써 전도도를 증가되어 이동도를 향상시켰다. 하지만 지나친 doping은 불순물 산란(impurity scattering)의 증가로 인해 이동도를 저하시키는 결과를 보여 주었다. 본 연구에서는 TFT의 이동도 향상을 위해 두 가지의 technology를 함께 적용시켜 a-SiN/a-Si:H 계면 각각에 phosphorus를 주입 및 doping을 하였다. 모든 박막은 PECVD로 제작하였으며 각 박막의 두께는 a-SiN/a-SiN(phosphorus)/a-Si:H(doped)/a-Si:H/n+ a-Si($2350{\AA}/150{\AA}/150{\AA}/1850{\AA}/150{\AA}$)으로 고정하고 유량을 변화시키면서 특성을 관찰하였다.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.929-935
• /
• 1995

In order to develop COG (Chip On Glass) technology for LCD module interconnecting the driver IC to Al pad electrode on the glass substrate, Anisotropic Conductive Adhesive(ACA) process, the most promising one among COG technologies, was investigated. ACA process was carried out by two steps, dispensing of ACA resin in the bonding area and curing by W radiation. Load on the chip was ranged from 2.0 to 15kg and the chip was heated at about 12$0^{\circ}C$. In resin, the density of conductive particles coated with Au or Ni at the surface were 500, 1000, 2000 and 4000 particles/$\textrm{mm}^2$, and the diameter of particles were 5, 7 and 12${\mu}{\textrm}{m}$. As a result of the experiments, ACA process using ACA particle of diameter and density of 5${\mu}{\textrm}{m}$ and 4000 particles/$\textrm{mm}^2$ respectively shows optimum characteristic with the stabilzed bonding properties and contact resistance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.827-834
• /
• 2003

In this paper, we implemented an optical information security system using computer generated hologram based on the principle of interference and BaTiO$_3$that is photorefractive material. First of all, we would generate binary phase hologram which can reconstruct the original image perfectly, and regard this hologram as the image to be encrypted. And then applying the interference rule to the hologram, encrypted and reference (fkey information) images are generated. In the decrypting process, we can get an interference intensity by interfering the reference image and the encrypted image in the Mach-Zehnder interferometer. and transforming interference intensity information into phase information using LCD(liquid crystal display) and finally recover original image by inverse Fourier transforming the phase information. In this process, the Intensity information generated by interference of two images is very sensitive to external vibrations. So, we get a stable interference using the characteristic of SPPCM(self pumped phase conjugate mirror) of BaTiO$_3$that is photorefractive material. The proposed method has an advantage of double image encryption by encrypting the hologram of the image instead of original image.

• Korean Journal of Optics and Photonics
• /
• v.31 no.3
• /
• pp.134-141
• /
• 2020

Optical three-dimensional (3D) measurement systems based on digital fringe projection are used in many contactless measurement applications. The system which can measure a dozen micrometers uses a liquid-crystal display (LCD) as the projection unit for generating a digital fringe pattern, because a flexible fringe pattern can be easily made by computer software. According to the gamma nonlinearity of the LCD projection unit, the digital fringe projection error on the object affects the accuracy of 3D object measurement. An improved method of LCD gamma-nonlinearity error reduction is proposed, by using the inverse function of the intensity transfer function to improve the accuracy. The improvement due to the proposed method is shown by measuring the difference in precision between a computer-generated sine wave and a camera-obtained sine wave for a standard semiconductor specimen.