• Journal of Applied Biological Chemistry
• /
• v.58 no.4
• /
• pp.377-381
• /
• 2015

The content analysis of 6-gingerol, which is an active compound, in Zingiber spp. (Z. officinale and Z. mioga) and their commercial foods (ginger teas and powders) was conducted using high-performance liquid chromatography. A reverse phase system was used, with a gradient solvent system of water and acetonitrile. The 6-gingerol content was highest in the methanol extract of Z. officinale root (17.09 mg/g extract) and ginger powder B (15.92 mg/g extract). The results demonstrated that this method was simple and reliable for the quality control of Zingiber commercial foods.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.2
• /
• pp.72-75
• /
• 1986

A convenient high performance liquid chromatographic method was established for the quantitative determination and content uniformity test of aclatonium napadisilate preparation. This method was more simple to make the sample solution for injection, and easy to determine the content in the preparation. Aclatonium napadisilate was chromatographed using a $Lichrosorb-NH_2$ column $(4mm\;{\times}\;25\;cm$, and acetonitrile-water mixture (83:17) as an eluent at a flow rate of 1.8 ml/min. RI-detector response was linear over a range of $0.5{\sim}2.0%$ aclatonium napadisilate under above conditions. Reproducibility studies gave relative standard deviation of 1.29%.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.875-883
• /
• 2003

Slurry clay has much higher water content than liquid limit of clay and even if small loads apply, it suffers a great settlement. Accordingly it is very difficult to perform a general consolidation test about slurry clay because of high water content. In this study consolidation tests have been performed successfully using Rowe Cell Tester about 1 remolding clay and 3 slurry clays with a water content of 100%, 133% and 150%. From the test results compression index characteristics, secondary compression index characteristics and consolidation coefficient characteristics have been investigated about slurry clay and remolding clay. Also two kinds of theory, by Terzaghi theory and by Mikasa theory, has been used to calculate consolidation coefficients. Compared to the calculation results, they had a similar value of consolidation coefficient. However if Mikasa theory is applied in the field design, the period which reach to the required consolidation degree will be much reduced compared to the period by Terzaghi theory because the time coefficient T$\_$v/ by Mikasa theory is far smaller than T$\_$v/ by Terzaghi theory.

• Journal of Animal Environmental Science
• /
• v.3 no.1
• /
• pp.35-42
• /
• 1997

The purpose of this study is to investigate the effect of the biologically treated animal wastewater as a liquid fertilizer in the paddy rice. The treated water has content of the ammonia nitrogen 24mg/I and nitrate 40 mg/I on an average in the first year. A trace of nitrite has been shown. The phosphate content was 92 mg/I on an average. The amount of yielded rice was 365kg/10a for test 1 (no fertilizer), 388dg/10a for test 2(chemical fertilizer), 526kg/10a for test 3 (treated water) respectively. The treated water showed 35% more in production than the chemical fertilizer. The treated water has content of the ammonia nitrogen 40mg/I and nitrate 67mg/I on an average in the second year. A trace of nitrite has been shown. The phosphate content was 57mg/I on an average. The amount of yielded rice was 402kg/10a for test 1, 505kg/10a for test 2, 607kg/10a for test 3 respectively. Yield of unhulled rice was 20% more in the plot of treated water than that of chemical fertilizer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.151-161
• /
• 1993

The purpose of this study was to investigate the effect of hydrophilic finish for polyester (PET) fabric and hydrophobic finish for cotton fabric on the water transport and comfort properties. Polyester fabric was treated with 10% sodium hydroxide solution to impart hydrophilicity. Cotton fabric was sprayed with Scotch-gard$^{(R)}$ water and oil repellent finish to impart hydrophobicity. Porosity, air permeability, contact angle, wickability and water vapor transport rate (WVTR) were measured to determine the water transport properties of fabrics. To compare the comfort properties of treated and untreated fabrics, wear test was performed by putting fabric patches on the upper back: stratum corneum water content (SCWC), subjective wettedness and comfort rating were determined. The results were as follows: (1) The contact angle of water on treated polyester fabric was decreased and that of treated cotton fabric was increased. Also, the wickability of treated polyester fabric was increased and the wickability of cotton fabric was decreased. (2) Although each finish did not change porosity, the water vapor transport rate of treated polyester fabric was increased and that of treated cotton fabric was decreased slightly. (3) The results of stratum corneum water content measurements showed good agreement with the results of the contact angle and the wickability, i.e., the better the liquid water transport properties are, the less the stratum corneum water contents were resulted. (4) The realtionship of subjective wettedness or comfort and stratum corneum water content was independent. Therefore, it was concluded that human perception on the subjective wettedness or the comfort is affected by the skin contact of wet fabric rather than by the stratum corneum water content.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.462-471
• /
• 2017

A more efficient use of nutrients from organic sources can benefit both farmers and water quality in agriculture. In this paper we reviewed information related to the regulations and guidelines of a swine liquid fertilizer to propose an establishment scheme for the official standards of swine manure slurry as a liquid fertilizer for organic farming. According to the law of establishment and designation of official standard of fertilizers, the liquid fertilizer made with pig liquid manure belongs to the byproduct fertilizer as of one of organic fertilizer. However, the official standards for byproduct fertilizers including the liquid fertilizer set by the Rural Development Administration (RDA), especially for a liquid swine manure fertilizer, should be revised to meet the goals of laws pursuing the environmentally sound agriculture, especially for organic farming because the terms and relevant standards need additional specific standards alike the standards such as impurities and parameter for declaration in EU. Therefore, it is suggested that official standards for byproduct fertilizers should be revised with respect to nutrient, salt content as of SAR and Na content instead of NaCl. Also we need to develop the maximum limit of heavy metals in soil to which the liquid fertilizer can be applied, as well as application rate depending on EC of the liquid fertilizer.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E2
• /
• pp.78-88
• /
• 2006

In order to study the characteristics of cloud, a real-scale experiment for cloud generation was carried out using an extinct vertical mine (430 m height) located in the northeastern Honshu, Japan. The dry particles generated from the three-step concentrations of NaCl solutions were used for cloud generation. The number size distributions of initial dry particles and cloud droplets were monitored by Scanning Mobility Particle Sizer (SMPS) and Forward Scattering Spectrometer Probe (FSSP) at bottom and upper sites of pit, respectively. The polymeric water absorbent film (PWAF) method was employed to measure liquid water content ($W_L$) as a function of droplet size. Moreover the chemical properties of individual droplet replicas were determined by micro-PIXE. The CCN number concentration shows the lognormal form in dependence of the particle size, while the number size distributions of droplets are bimodal showing the peaks around $9{\mu}m$ and $20{\mu}m$ for every case. In comparison to background mineral particles, right shifting of size distribution line for NaCl particles was occurred. When NaCl solutions with three-step different concentrations were neulized, $W_L$ shows the strong droplet size dependence. It varied from $10.0mg\;m^{-3}$ up to $13.6mg\;m^{-3}$ with average $11.6mg\;m^{-3}$. A good relationship between $W_L$ and cloud droplet number concentration was obtained. Both chemical inhomogeneities (mixed components with mineral and C1) and homogeneities (only mineral components or C1) in individual droplet replicas were obviously observed from micro-PIXE elemental images.

• Membrane and Water Treatment
• /
• v.5 no.2
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.4
• /
• pp.51-57
• /
• 2006

This study was carried out to investigate the soil water characteristic curve and prediction of void ratio with net stress and matric suction using the linear elastic and volumetric deformation analysis method on unsaturated silty. The unsaturated soil tests were conducted using a modified oedometer cell and specimens were prepared at water content 2 times of liquid limit and required void ratio. The axis translation technique was used to create the desired matric suctions in the samples. It is shown that soil water characteristic curve and volumetric water content were affected significantly by preconsolidation pressure. As a matric suction increases, the reduction ratio of void ratio was shown to considerably small. Also, the predicted and measured void ratio for unsaturated soils using the linear elastic and volumetric deformation analysis showed good agreement as net stress and matric suction increases.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.641-646
• /
• 2016

The effects of water addition on $Y_2O_3$ coatings or thick films prepared by plasma suspension spray (SPS) have been investigated. Water addition in suspension media was found to be effective to control the color of a $Y_2O_3$ coating prepared by SPS. The color changed with water addition at the shortest stand-off distance of 50 mm even if samples had the same crystalline phase. Change was not correlated with fragmentation behavior of liquid suspension inside the plasma jet. Water content over 50 vol% was found to produce unmelted particles, indicating that water suppressed heat transfer to the particles. However, plasma jet temperature was not affected. Instead, the coating fabricated with water addition has higher oxygen and lower carbon content compared to these characteristics of the coating without water addition. This was attributed to the retarded complete evaporation of liquid media from the suspension droplet, resulting in inhibition of excessive heating and evaporation of the molten $Y_2O_3$ droplet. In this regard, crystalline phase development with respect to stand-off distance and water addition was discussed.