• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.74-77
• /
• 2004

Porous membranes were prepared via thermally induced phase separation (TIPS) of (ethylene-co-vinyl alcohol) (EVOH)/glycerol mixtures. The liquid-liquid (L-L) phase boundaries are shifted to higher temperature when the ethylene contents in EVOH increase. Moreover, the kinetic study proved that the growth of droplets formed by the general liquid-liquid (L-L) phase separation obeyed a power-law scaling relationship in the later stage of spinodal decomposition (SD). A new phase separation mechanism was presented, in which the L-L phase separation could be resulted from the crystallization. The hollow fiber membranes were prepared. The membranes showed asymmetric structures with skin layer near the outer surface, the larger pores just below the skin layer and the smaller pores near the inner surface. The effect of ethylene content (EC) in EVOH, cooling water bath temperature and take-up speed on membrane performance was investigated.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1167-1176
• /
• 2018

Steel cylindrical tanks are widely used for the storage of hazardous substances of which leakage must be prevented under any circumstances. However, the dynamic response of the steel cylindrical liquid storage tank depends sensitively on the fluid-structure interaction and the vibration of the tank structure and necessitates clarification for the safety of the tank structure. This paper presents the results of shaking table tests performed to examine the dynamic behavior of a scaled cylindrical steel tank model considering the presence or not of fixed roof and added mass at the top of the tank for various fluid levels. The test results confirm the occurrence of both beam-type and oval-type vibration modes and show that the larger content of liquid inside the container amplified the acceleration along the height of the cylindrical tank. The oval-type vibration modes are seen to be more dominant in case of large water-to-structure mass ratio.

• 한국지반환경공학회 논문집
• /
• 제2권1호
• /
• pp.23-30
• /
• 2001

건설현장에서 항상 문제가 되는 영동지역에 널리 분포하는 유기질토에 대한 공학적 특성을 규명하고자 지역별 대표적인 불교란 시료를 채취하여 실내 시험을 행한 결과를 분석 검토하여 다음과 같은 결론을 얻었다. 영동지역 유기질토의 물리적 특성은 자연함수비가 50.8~343.5%, 유기물 함유량이 12.1~42.5%, 비중이 1.76~2.71, 액성한계가 46.6~440.2%, 소성지수가 9.2~557.2%이다. 압밀하중이 증가할수록 약간의 기복이 있었으나, 압밀계수는 대체로 약간 작아지는 경향을 나타내고 있다. 2차압밀계수와 압축지수와의 관계는 $C_a/C_c$의 값이 0.001~0.091의 범위로 나타났고, 2차 압밀계수는 유기물 함유량이 11~22%범위에서는 크게 증가하는 경향을 나타냈다.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.31-36
• /
• 2004

Liquid crystalline phases were formed from acylglutamate; polyglyceryl-10 myristate and glycerine mixture and they were used as a base material for preparing an O/W emulsion. When an oil phase is added into the liquid crystalline phases, it was inserted into the dispersed liquid crystal droplets rather than stayed outside the liquid crystals, which can be known by the fact that the size of liquid crystal droplets increases with the increasing oil phase content. Along with the increase in the droplet size, the complex modulus increases from 100 to 350 pascals and the loss angle decreases from 60 to 24 degrees, from which it can be known that the increase in the internal phase volume results in the increase in the elastic property of oil in liquid crystalline-phases (O/LC). When the water phase was lastly added into the O/LC phase, the emulsification occurred to form a O/W emulsion and the averaged particle size of the O/W emulsion changes from 22.5nm to 538nm with the addition of water phase. The results from the droplet size measurements and stability tests under accelerated conditions such as high temperature show that the obtained O/W emulsion is very consistent with time.

• Geomechanics and Engineering
• /
• 제33권2호
• /
• pp.175-182
• /
• 2023

In general, the design of structures and its construction processes are fundamentally dependent on their foundation and supporting ground. Thus, it is imperative to understand the behavior of the soil under certain stress and drainage conditions. As it is well known that certain characteristics and behaviors of soils with fines are highly dependent on water content, it is critical to accurately measure and identify the status of the soils in terms of water contents. Liquid limit is one of the important soil index properties to define such characteristics. However, liquid limit measurement can be affected by the proficiency of the operator. On the other hand, dynamic properties of soils are also necessary in many different applications and current testing methods often require special equipment in the laboratory, which is often expensive and sensitive to test conditions. In order to address these concerns and advance the state of the art, this study explores a novel method to determine the liquid limit of cohesive soil by employing video-based vibration analysis. In this research, the modal characteristics of cohesive soil columns are extracted from videos by utilizing phase-based motion estimation. By utilizing the proposed method that analyzes the optical flow in every pixel of the series of frames that effectively represents the motion of corresponding points of the soil specimen, the vibration characteristics of the entire soil specimen could be assessed in a non-contact and non-destructive manner. The experimental investigation results compared with the liquid limit determined by the standard method verify that the proposed method reliably and straightforwardly identifies the liquid limit of clay. It is envisioned that the proposed approach could be applied to measuring liquid limit of soil in practical field, entertaining its simple implementation that only requires a digital camera or even a smartphone without the need for special equipment that may be subject to the proficiency of the operator.

• 콘크리트학회논문집
• /
• 제16권4호
• /
• pp.477-484
• /
• 2004

콘크리트 구조물의 내구성 향상을 위한 대책의 일환으로 "면도포용 액상형 흡수방지재"가 적용되고 있으며, 이의 품질관리 차원에서 "내흡수성" 및 "침투깊이"에 관한 최저 요구성능이 규정되어 있다. 그러나 이 규정은 시간경과에 따른 성능변화 및 콘크리트 구조물에 미치는 외부환경요인을 배제한, 즉 흡수방지재의 초기 정착상태를 전제로 하고 있다. 이에 따라 본 연구에서는 흡수방지재의 재령에 따른 내흡수성능 변화 측정을 위해 외부폭로 상태에 시험체를 방치하고, 일정기간 간격으로 침투깊이와 물흡수량을 측정하였으며, 이를 일반기건 시험체와 수침지 시험체의 측정값과 비교 $\cdot$분석하였다. 또한 복합용도 차원에서 흡수방지재 도포 후 폴리머 시멘트 도막재를 시공할 경우의 부착강도로 측정하였다. 이때 사용된 흡수방지재는 침투깊이가 우수하고 환경친화적인 수성의 실리론 유화제품으로 하였다. 실험결과 흡수방지재는 동일 재령에서 도포량, 고형분 함량이 클수록 침투깊이가 크고 물흡수량은 작게 나타나지만, 재령이 증가함에 따라 그리고 수분이 공급되는 경우에 보다 원활히 내부로 이동하여 침투깊이는 증가한다. 그러나 이에 반해 물흡수량은 점차 증가하는데, 이는 내흡수성을 발현하는 활성성분이 내부로 용해 이동하여 콘크리트 표면의 활성성분 함량이 감소되기 때문으로 판단된다.

• 한국분무공학회지
• /
• 제5권1호
• /
• pp.5-12
• /
• 2000

The beneficial aspects of applying emulsion fuels to combustion systems may be due to the changes of fuel properties which lead to the enhanced atomization characteristics. The spray characteristics of water/oil emulsified fuel injected from the pressure-swirl(simplex) atomizer using for oil burner were investigated. Four different water contents from 10 to 40 % by volume at 10% increment were prepared by mixing with the different contents of surfactants. Total amount of surfactant used was varied from 1 to 3 % by volume. This study demonstrates the influence of water and surfactant contents of emulsified fuel, injection pressure on the spray characteristics, i.e. Sauter mean diameter(SMD) and spray angle. The drop size distribution of the emulsified fuel spray was measured with a Malvem particle sizer. In order to measure the spray angle, the digital image processing was employed by capturing multiple images of the spray with 3-CCD digital video camera. It was evident that the addition of water and surfactant changes fuel properties which are the key parameters influencing the atomization of the spray. The increase in surfactant content results in the decrease of SMD and the increase in spray angle. The droplets decease with increase in injection pressure, but the influence of injection pressure in this experimental condition was less important than expected. The more viscous fuel with the increase of water content exhibits the larger droplets in the centerline of the spray, and the less viscous fuel in the outer edges of the spray. The increase in axial position from the nozzle causes the spray angle to decrease. The spray angle decreases with increase in water content. This is due to increase in viscosity with increase in water content.

• 한국미생물·생명공학회지
• /
• 제19권4호
• /
• pp.377-382
• /
• 1991

우지를 lipase에 의해 지방산과 글리세린으로 분해하는 반응을 액상 및 고상에서 수행하였다. 올리브유를 기질고 lipase OF 360(일본 메이토사 제품)의 특성을 조사한 결과 최적 pH는 6, 최적 온도는 $37^{\circ}C$이었다. 우지를 기질로 액상 효소반응을 수행한 결과는 물사용량 80 wt/wt, 온도 $37^{\circ}C$, 효소사용량 200unit/g tallow 조건에서 93의 가수분해율을 얻을 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.1007-1010
• /
• 2006

This study investigates the spatial structure of the total cloud liquid water content Q fields over the Northwest Pacific Ocean during winter monsoon. The distributions of Q have been estimated from the brightness temperatures of the ocean - atmosphere system $T_B(f)$, where f is frequency, measured by AQUA AMSR-E in January -March 2003. Marine strati (St) and stratocumuli (Sc) are typical for winter monsoon season. They were analysed using mainly high-frequency channel at f = 36.5 GHz, vertical polarisation. $T_B$ data were accompanied by the data on near surface wind speed, air temperature and humidity from the nearest meteorological stations. Tow one-dimensional spectra were computed for downwind and crosswind sections of Q fields. The AMSR-E antenna field of view (14-8 km) and the cloud field sizes (100-1000 km) restricted the spatial scales. The results of case study Jan 31 2003 are presented. Scale-invariant spectrum is typical. In the cases of extended St levels a spectral slope equals about -1.7, conforming to classical -5/3 of turbulence theory. For Sc cases the absolute magnitude of spectral slope is rather higher, as a rule. The value is about -2. In the case when cloud streets are presented, a strait line form of spectrum is less reliable with a slope being rather lower (about -1.4).

• 산업기술연구
• /
• 제25권A호
• /
• pp.57-65
• /
• 2005

In this paper, for the highly plastic marine soft clay distributed in west and southern coast of Korean peninsula of Kwangyang and Busan New Port areas, correlation between compression index and other indices representing geotechnical engineering properties such as liquid limit, void ratio and natural water content were analyzed. Appropriate empirical equations of being able to estimate the compressibility of clays in the specific areas were proposed and compared with other existing empirical ones. For analyses of the data and test results, data for marine clays were used from areas of the South Container Port of the Busan New Port, East Breakwater, Passenger Quay, Jungma Reclamation and Reclamation Containment in the 3rd stage in Kwangyang. In order to find the best regression model by using the commercially available software, MS EXCEL 2000, results obtained from the simple linear regression analysis, using the values of liquid limit, initial void ratio and natural water content as independent variables, were compared with the existing empirical equations. Multiple linear regression was also performed to find the best fit regression curves for compression index and other soil properties by combining those independent variables. On the other hands, another software of SPSS for non-linear regression was used to analyze the correlations between compression index and other soil properties.