• Smart Structures and Systems
• /
• 제28권6호
• /
• pp.839-853
• /
• 2021

In this paper, a novel multimode liquid metal-based pressure sensor is developed. The main body of the sensor is composed of polydimethylsiloxane (PDMS) elastomer. The structure of the sensor looks like a sandwich, in which the upper structure contains a cylindrical cavity, and the bottom structure contains a spiral microchannel, and the middle partition layer separates the upper and the bottom structures. Then, the liquid metal is injected into the top cavity and the bottom microchannel. Based on linear elastic fracture mechanics, the deformation of the microchannel cross-section is theoretically analyzed. The changes of resistance, capacitance, and inductance of the microchannel under pressure are deduced, and the corresponding theoretical models are established. The theoretical values of the pressure sensor are in good agreement with experimental data, implying that the developed theoretical model can explain the performance of the sensor well.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.417-422
• /
• 2016

PURPOSE. The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS. Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples ($8{\times}8{\times}1mm$) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (${\alpha}=.05$). RESULTS. The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (P<.05). Staining resistances of E and CS were significantly higher than those of L and ME (P<.05). CONCLUSION. Ceramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics.

• Journal of the Korean Wood Science and Technology
• /
• 제41권6호
• /
• pp.559-565
• /
• 2013

목재사용량의 증가에 따라 목재의 화재안전성에 대한 요구가 높아지고 있다. 실내 사용 목재의 난연처리에 무기인계를 약제로 사용함으로써 환경에 대한 부담을 줄이면서 난연성능을 향상 시킬 수 있다. 수용성 약제를 가압 주입하여 목재 내 깊숙이 침투시키면 목재의 고유기능을 유지하면서 난연성능을 부여 할 수 있다. 난연제의 용탈을 억제하여 장기간 성능을 유지할 수 있는 장점도 있다. 저자들은 액상규산나트륨을 주약제로 하고, 붕산 및 인계 약제를 보조약제로 하여 목재 내로 약액을 주입하는 공정을 개발하였다. 이들 약제는 난연성능 외에 방부 및 방충성능을 지니는 약제가 포함되어 있어, 난연성능과 함께 목재 사용 시 노출될 수 있는 부후환경에서의 내후성능을 방미효력과 방부효력으로 평가하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권2호
• /
• pp.190-197
• /
• 2008

This study was designed to analyze boar sperm to compare motility, acrosome morphology, viability and ATP by various preservation methods between Duroc boar A with cold shock resistance sperm and Duroc boar B with cold shock sensitivity sperm. Semen volume, sperm concentration, motility and normal acrosome between Duroc boar A and B did not show any differences within 2 h after collection. There were no differences in sperm motility and normal acrosome between boar A and B at 1 day of preservation at $17^{\circ}C$ and $4^{\circ}C$, respectively. However, sperm motility and normal acrosome from 2 day of preservation at $17^{\circ}C$ and $4^{\circ}C$, respectively, were higher for boar A than boar B. The frozen-thawed sperm motility and normal acrosome were higher for boar A than boar B. The sperm viability and ATP concentration according to storage period of liquid semen at $17^{\circ}C$ and $4^{\circ}C$ were higher for boar A than boar B. Also, the sperm viability and ATP concentration of frozen-thawed semen were higher for boar A than boar B. In conclusion, we found out that the original quality of boar semen with cold shock resistance sperm played an important role.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 춘계 총회 및 학술발표회
• /
• pp.51-52
• /
• 1994

High permeability, selectivity and stability are the basic properties also required for membrane gas separations. The $CO_2$ separation by liquid membranes has been developed as a new technique to improve the permeability and selectivity of polymeric membranes. Sirkar et al.(1) have atlempted the hollow-fiber contained liquid membrane technique under four different operational modes, and permeation models have been proposed for all modes. Compared to a conventional liquid membrane, the diffusional resistance decreased by the work of Teramoto et al.(2), who referred to a moving liquid membrane. Recently, Shelekhin and Beckman (3) considered the possibility of combining absorption and membrane separation processes in one integrated system called a membrane absorber. Their analysis could be predicted effectively the performance of flat sheet membrane, however, there are restrictions for considering a flow effect. The gas absorption rate is determined by both an interfacial area and a mass transfer coefficient. It can be easily understood that although the mass transfer coefficients in hollow fiber modules are smaller than in conventional contactors, the substantial increase of the interfacial area can result in a more efficient absorber (4). In order to predict a performance in the general system of hollow-fiber membrane absorber, a gas-liquid mass transfor should be investigated inevitably. The influence of liquid velocity on both a mass transfer and a performance will be described, and then compared with experimental results. A present study is attempted to provide the fundamentals for understanding aspects of promising a hollow-fiber membrane absorber.

• 한국분말재료학회지
• /
• 제12권2호
• /
• pp.131-135
• /
• 2005

7xxx series Al alloy has the most attractive properties including its excellent high specific strength, stress corrosion cracking and corrosion-resistance. However, in case of the Al-Zn system, the liquid phase has a transient aspect because of the high solid solubility of Zn in Al. Therefore, transient liquid phase sintering behavior was observed during the sintering process. And the amount of liquid and its duration were influenced by the process variables including heating rate and final sintering temperature. At high heating rates($100^{\circ}C/min$), the liquid fraction increased during sintering because diffusion was minimized and therefore local saturation could easily occur. The sintered density increased with increasing heating rate.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2866-2877
• /
• 2021

The complex coupling relationship between liquid sodium and concrete materials affects both the sodium fire characteristics and concrete properties through heat and chemical erosion. In this study, experiments on direct and indirect (separated by a steel plate) contact of the columnar sodium fire with the concrete surface were performed. It was found that the combustion efficiency of liquid sodium in direct contact with concrete was significantly enhanced and accompanied by intermittent explosions and splashing of small concrete fragments. The sodium fire on the surface of the concrete considerably increased the internal temperature, pore size, and distribution density of the concrete. In addition, the depth of influence on the loosening of the concrete structure was also greatly extended. The contact of liquid sodium with the concrete substantially affected its permeability resistance. The water absorption of the concrete surface was increased by more than 70% when liquid sodium directly impacted the bare concrete surface. However, the change in water absorption in the centre of the concrete was primarily affected by the duration of the external heat.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.289-299
• /
• 2020

Highly aromatic (HA) oils are common processing aids used in tire tread compounds. However, they often bleed and evaporate from the vulcanizates during tire use. Thus, the mechanical and dynamical properties of the tire decrease. To overcome this problem, we investigated nonfunctionalized liquid butadiene rubber (LBR-305, Kuraray) and center-functionalized liquid butadiene rubber (C-LqBR), polymerized by anionic polymerization. In addition to the liquid butadiene rubbers, p-tert-octylphenol (P-Resin) and C5 hydrocarbon (H-Resin) tackifier resins, which can induce entanglement of rubber compounds, were researched as a processing aid to solve the bleeding problem. Liquid butadiene rubbers have significantly reduced extraction loss by crosslinking with the main rubber chain. They have also increased the abrasion resistance and showed similar or better mechanical and dynamical properties against HA oils. However, resin compounds did not show differences in extraction loss compared to HA oil compounds; instead, they showed increased wet traction.

• 대한화장품학회지
• /
• 제30권1호
• /
• pp.59-62
• /
• 2004

본 연구는 다양한 종류의 에멀젼에 전단응력을 가하며 그때 일어나는 에멀젼의 상 변이를 전기, 유변학적 특징을 통해 실시간으로 측정해보는 것이다. 전기 전도도의 변화는 자체 제작한 JELL $I^{TM}$ (Joint Electro-rheometer for Liquid-Liquid Inversion) 칩을 이용하였으며, 동시에 유변물성측정장치(rheometer)를 이용하여 유변물성의 변화를 측정하였다. JELL $I^{TM}$ 과 인조 피부를 유변물성측정장치 사이에 장착하고 그 사이에 다양한 종류의 에멀젼을 얇게 발라준 후, 일정한 전단응력을 주며 시간에 따른 저항과 전도값의 변화를 측정하였다. O/W 제형의 경우 시간에 따라 저항값이 커지는 경향을 보였으며 저항값은 내부 상이 많을 수록 더 급격한 변화를 나타냈다. 이때의 점도 변화를 보면, 저항값의 변화가 클수록 점도의 변화도 큼을 볼 수 있었다. 이것은 내부 상의 파괴로 인해 외부의 힘에 저항하는 힘이 약해졌기 때문이라고 예상된다. 이런 결과를 이용하여 전단응력에 의한 에멀젼 상 변이 특성과 정도를 실시간, 정량적 비교할 수 있었다., 정량적 비교할 수 있었다.

• 미생물학회지
• /
• 제36권2호
• /
• pp.161-165
• /
• 2000

국내 시판 19종의 드링크 및 18종의 액상 요구르트 제품에 함유된 2종의 유산균인 Lactobacilli 및 Bifidobacteria의 내산성을 인공위액(pH 1.5) 조건에서 비교 고찰되었다. 드링크 및 액상 요구르트 제품중 초기 Lactobacilli의 생존율은 각각 $10^8~10^{10}$ cfu/ml 및 $10^6~10^{10}$cfu/ml 범위 내에 있었다. 한편 드링크 요구르트 중 초기 Bifidobacteria의 생존율 $10^8~10^{10}$cfu/ml 이었다. 요구르트 제품중 Lactobacilli 및 Bifidobacteria의 생존율은 인공위액에 노출 시간이 증가함에 따라 점차 감소하는 경향을 나타내었으며 120분 노출시에 제품들간에 큰 차이를 나타내었다. (<$10^3~10^6$cfu/ml),캡슐을 함유한 요구르트 제품의 경우, 캡슐을 제외한 Mix는 인공위액에 30분에서 120분 노출시에 약$10^5$cfu/ml이상의 생존율을 나타내었으며 타사 제품과 유사한 거동을 보였다. 그러나 Bifidobacteria를 함유한 캡슐요구르트 제품의 경우 인공위액에 약 120문 노출시켰으때 타사 제품보다 생존율이 약10~737배 이상 증가하였다. 즉 Bifidobacteria의 내산성은 코팅물질을 사용한 캡슐로 봉입하였을 때 증가됨을 알 수 있었다.