• 대한화학회지
• /
• 제20권6호
• /
• pp.460-468
• /
• 1976

액체분자는 고체 및 기체와 같은 자유도를 갖는다는 가정하에 물에 관한 이론을 얻었다. 고체와 같은 분자의 진동수를 알아내는 데에 분광학적인 데이타를 이용하였다. 몰부피, 증기압, 엔트로피, 증발 엔트로피, 팽찰률, 압축률, 일정한 부피 및 일정한 압력하에서의 열용량, 표면장력, 임계점등을 계산한 결과 모두가 실험치와 아주 잘 일치하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.173-179
• /
• 2004

Breakup characteristics of liquid sheets formed by the impingement of two water jets, such as a breakup length and a breakup wavelength of sheet, were investigated as increasing the injection velocity up to 30m/s and the ambient gas pressure up to 4.0㎫. While round edged orifices formed a laminar sheet which has no waves on the sheet when the injection velocity is low, sharp edged orifices formed a turbulent sheet which has impact waves irrespective of the injection velocity. Thus we compared the differences of breakup characteristics between them. The results showed that the aerodynamic force significantly affects the breakup of laminar sheet when the gas based Weber number is higher than unity. It was also found that the turbulent sheets have three breakup regimes, i.e. expansion regime, wave breakup regime and catastrophic breakup regime according to the gas based Weber number.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권1호
• /
• pp.1-8
• /
• 2002

A numerical analysis was performed on the fluid flow in injector orifice of a liquid rocket engine. The present computational code was verified against the published data for turbulent flow in a pipe with a sudden expansion-contraction. Considered were the parameters for the flow analysis in an injector orifice: Reynolds number, ratio of mass flow rate of the injector orifice and inlet flow rate, and slant angle of the injector orifice. The discharge coefficient increased slightly as the Reynolds number increased. The slant angle of the injector changed critically the discharge coefficient. The discharge coefficient increased by 7% when the slant angle changed from $-30^{\circ}$ to $30^{\circ}$ The ratio of mass flow rate had relatively little impact on the discharge coefficient.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.301-307
• /
• 2012

SiAlON glasses are silicates or alumino-silicates, containing Mg, Ca, Y or rare earth (RE) ions as modifiers, in which nitrogen atoms substitute for oxygen atoms in the glass network. These glasses are found as intergranular films and at triple point junctions in silicon nitride ceramics and these grain boundary phases affect their fracture behaviour. This paper provides an overview of the preparation of M-SiAlON glasses and outlines the effects of composition on properties. As nitrogen substitutes for oxygen in SiAlON glasses, increases are observed in glass transition temperatures, viscosities, elastic moduli and microhardness. These property changes are compared with known effects of grain boundary glass chemistry in silicon nitride ceramics. Oxide sintering additives provide conditions for liquid phase sintering, reacting with surface silica on the $Si_3N_4$ particles and some of the nitride to form SiAlON liquid phases which on cooling remain as intergranular glasses. Thermal expansion mismatch between the grain boundary glass and the silicon nitride causes residual stresses in the material which can be determined from bulk SiAlON glass properties. The tensile residual stresses in the glass phase increase with increasing Y:Al ratio and this correlates with increasing fracture toughness as a result of easier debonding at the glass/${\beta}-Si_3N_4$ interface.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1790-1800
• /
• 2005

The examination on the operating mechanism of a pulsating heat pipe (PHP) using visualization revealed that the working fluid in the PHP oscillated to the axial direction by the contraction and expansion of vapor plugs. This contraction and expansion is due to the formation and extinction of bubbles in the evaporating and condensing section, respectively. In this paper, a theoretical model of PHP was presented. The theoretical model was based on the separated flow model with two liquid slugs and three vapor plugs. The results show that the diameter, surface tension and charge ratio of working fluid have significant effects on the performance of the PHP. The following conclusions were obtained. The periodic oscillations of liquid slugs and vapor plugs were obtained under specified parameters. When the hydraulic diameter of the PHP was increased to d=3mm, the frequency of oscillation decreased. By increasing the charging ratio from 40 to 60 by volume ratio, the pressure difference between the evaporating section and condensing section increased, the amplitude of oscillation reduced, and the oscillation frequency decreased. The working fluid with higher surface tension resulted in an increase in the amplitude and frequency of oscillation. Also the average temperature of vapor plugs decreased.

• 항공우주기술
• /
• 제11권1호
• /
• pp.91-97
• /
• 2012

가스발생기 산화제 개폐 밸브에 사용되는 주름관의 구조 해석 및 시험이 수행되었다. 이 주름관은 극저온에서 압축 변위와 높은 외압 하중을 받는다. 구조 해석은 상온 및 극저온에서 EJMA (Expansion Joint Manufacturing Association) 표준 및 상용 유한 요소 해석프로그램인 Abaqus v6.9를 이용하여 수행되었다. 스프링 강성, 응력 및 피로 수명 해석 결과들이 비교되었고 유한 요소 해석 결과에서 접촉 및 재질의 소성에 의한 영향을 살펴보았다. 또한 파열 시험과 관련된 유한 요소 해석 결과도 제시되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2195-2197
• /
• 1999

Electric breakdown in the liquid produces a spark channel. The energy input into the channel causes expansion of a vapor gas cavity. If the power of the discharge is high enough, this expansion is fast enough to produce a shock wave which propagates through the liquid to the subject of destruction. We focused our attention on the correlation between electric parameters and the characteristics of the flash caused by point to-point electrode discharge in the water. By varying firing voltage and gap length, we obtained the features of the flash : amplitude, pulse width, and so on. In this paper, We have known that there is a concrete interrelation between underwater firing voltage and photodiode output.

• 한국추진공학회지
• /
• 제15권4호
• /
• pp.41-47
• /
• 2011

75톤급 개방형 액체로켓 엔진에 장착되는 터보펌프의 터빈은 초음속 충동형 방식이다. 본 연구에서는 터빈 로터 앞전 두께가 성능에 미치는 영향을 실험을 통해 살펴보았다. 터빈 시험에서는 2가지 다른 앞전 두께를 가진 로터를 이용해 실험하였으며, 각 로터는 앞전 두께 대 피치비가 30톤 로터 대비 각각 1.9배와 1.4배이다. 시험 결과 로터 두께가 1.4배인 로터의 설계 상사점 효율이 1.5% 상승하였고, 동일 회전수에서 최대 효율이 나타나는 압력비도 완전팽창비 쪽으로 증가하였다.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.2012-2021
• /
• 1995

An experimental study was performed for the analysis of dynamic characteristics of refrigeration system by controlling the evaporator superheat. Experimental data have been taken utilizing two different devices, thermostatic expansion valve(T.E.V.) and electronic expansion valve(E.E.V.), for the control of the evaporator superheat. The ranges of parameters, such as superheat, mass flow rate of refrigerant and inlet temperature of evaporator were 5-30.deg. C 90-170 kg/h and 10-25.deg. C, respectively. The data taken from the T.E.v.and E.E.v.were discussed with the control of the superheat, pressure drop, refrigerating capacity, compression work, evaporating temperature, condensing temperature and COP affecting performance characteristics of refrigeration system. In case of the refrigerant flow control with T.E..V., the superheat and pressure drop of the evaporator varied periodically, but the control with E.E.V., the parameters were very stable. In E.E.v.control, refrigerating capacity, compression work and evaporating temperature were decreased with increasing superheat, and the highest COP was obtained in the range of superheat from 5.deg. C to 15.deg. C.

• 한국추진공학회지
• /
• 제2권2호
• /
• pp.83-87
• /
• 1998

액체로켓엔진에서 발생하는 초음속 제트 소음을 감소시킬 수 있는 물 분사형 소음기를 설계, 제작하여 물의 질량 유동률, 1차관 길이, 그리고 2차 확장관의 지름과 같은 기하학적 변화에 따른 성능 시험을 수행하였으며, 다음과 같은 결과를 얻을 수 있었다. 1. 동일한 물의 질량 유동률에서, 1차관의 길이가 길수록 효과이었다. 2. 물이 질량 유동률이 증가하면, 소음은 감소한다. 3. 최적의 물 질량 유동률은 추진제 공급량의 10∼12배 정도이다. 4. 소음기에 2차 확장관을 부착할 경우, 약 30㏈ 정도 소음감소 효과를 얻을 수 있다.