• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.229-233
• /
• 2016

본 연구에서는 식물세포배양액으로부터 파클리탁셀을 효율적으로 회수하기 위하여 초음파를 이용한 액-액 추출 공정을 개발하였다. 액-액 추출을 위한 최적의 초음파 파워와 조업 시간은 주어진 하층(메틸렌 클로라이드 층)/상층(메탄올 농축액 층) 비(25%, v/v)에서 각각 250W와 15 min임을 알 수 있었다. 최적 조건 하에서 초음파를 이용한 액-액 추출 공정의 경우 단 1 회 추출로 대부분의 파클리탁셀을 하층(메틸렌 클로라이드 층)으로부터 회수(~92%) 가능하였다. 또한 무기염 첨가에 의한 초음파 상승효과로 인하여 액-액 추출을 위하여 적절한 무기염 농도와 초음파 파워가 요구됨을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1229-1232
• /
• 2004

The ratio of optimized concentration on optical characteristics for phase-separated composite organic films (PSCOF) liquid crystal display is 30% of pre-polymer (NOA65) and 70% of ferroelectric liquid crystal (Felix). The layer structure in ferroelectric liquid crystal cell made by 30% NOA65 and 70% Felix materials is tilt-bookshelf layer structure. The angle of tilt-bookshelf structure are 17$^{\circ}$, 12$^{\circ}$ which are almost same of tilt angle of ferroelectric liquid crystal in Sm $C^{\ast}$ phase. We know that this result is from compensating the layer buckling. In this paper, we will discuss the effect of layer structure in PSCOF cell on ratio of concentration between pre-polymer and liquid crystal by x-ray measurements. We believe that technology of PSCOF is a good solution to solve the problems of align-defect and mechanical shock for future TV application and plastic LCD.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.426-431
• /
• 2004

We have studied the pressure-dependent liquid crystal's dynamics in a twisted nematic (TN) liquid crystal panel with thin film transistor by applying an external pressure to it. When the external pressure is applied to the panel in a dark state, the disclination lines were generated as a light leakage whereas they did not appear in a simple test cell that has only pixel and common electrodes. It was because the disclination lines were Provoked by the electric field between pixel electrode and data/gate bus line for active matrix driving. Consequently, the external pressure resulted in dynamic instability of the liquid crystal so that the disclination lines at the data/gate bus line intruded into the active area.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권2호
• /
• pp.103-108
• /
• 2005

For more accurately describing the durations of the light and the dark phases of micro-algal cells over the whole light-dark cycle, and probing into the relationship between the liquid circulation time or velocity, the aeration rate and cell density, a series of experiments was carried out in 10 cm light-path flat plate photobioreactors. The results indicated that the liquid flow in the flat plate photobioreactor could be described by liquid dynamic equations, and a high biomass output, higher content and productivity of arachidonic acid, $70.10\;gm^{-2}d^{-1},\;9.62\%$ and 510.3 mg/L, respectively, were obtained under the optimal culture conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.479-482
• /
• 2004

We report a method for simultaneous measurements of cell gap, twist angle, birefringence dispersion of liquid crystal (LC) material and alignment directions in filled reflective LC cells. The method is based on spectral measurements of the LC cell reflectivity for three orientations ($0^{\circ},45^{\circ},90^{\circ}$) of the exit polarizer and may be applied for LC cells with low and high gaps.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.446-449
• /
• 2005

The alignment property of liquid crystals on the two-easy axes substrate is investigated. The two-easy axes substrate frustrates the orientation of the LCs next to the substrate, and hence influences the birefringence of the LC cell. Experimental findings reveal that the ratio of the rubbing strengths in the different rubbing directions and the cell thickness substantially influence the birefringence of the LC cell. The surface anchoring energetic competition between the different rubbing directions contributes to the observed results.

• 한국염색가공학회지
• /
• 제6권1호
• /
• pp.44-48
• /
• 1994

Cellulose triacetate(CTA) liquid crystal solutions obtained via dissolution of CTA in solvent mixture of triflucroacetic acid and methylene chloride were spun and saponified in various chemicals. Among chemicals, methanol/sodium hydroxide mixture endowed highest tenacity as well as modulus to regenerated cellulosic fiber and the fiber thereof showed Cell I or Cell IV morphology, or mixed morphology of Cell I and IV.

• 한국광학회지
• /
• 제19권3호
• /
• pp.161-168
• /
• 2008

본 논문에서는 왼손(left-handed)과 오른손(right-handed) 방향으로 각각 $180^{\circ}$ 트위스트(${\pi}$-twist)된 액정상을 두 개의 안정상태로 가지는 쌍안정(bistable) 액정 디스플레이(liquid crystal display)를 제안한다. 제안된 소자는 액정과 자외선경화 폴리머 물질의 혼합물의 비등방성 상분리 방법으로 형성된 격벽에 의해 화소고립된(pixel-isolation) 구조를 가지며, 인가전압의 주파수에 따라 유전율 이방성의 부호가 바뀌는 이중주파수(dual-frequency) 특성의 네마틱(Nematic) 액정을 사용한다. 두 안정된 액정상 사이의 스위칭은 인가전압의 주파수를 연속적으로 변화시킴으로써 이루어지며, 주파수 변화에 따른 액정의 유체 효과에 의해 발생하므로 응답특성이 매우 빠르다. 두 액정상은 카이랄 도펀트(chiral dopant)가 아니라 격벽이 가지는 앵커링(anchoring)의 영향으로 안정화됐기 때문에 거의 동일한 탄성에너지(elastic free energy)를 가지게 되어 우수한 메모리 특성을 나타낸다. 또한, 위상지연필름을 이용한 투과형 광학보상을 통해 높은 정면 명암비(contrast ratio)를 가질 수 있다.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.91-93
• /
• 2010

The shearing effects on the electro-optical properties of a stressed cholesteric liquid crystal were investigated. A photopolymer was dispersed in the cholesteric liquid crystal cell. By carefully choosing the mixing ratio between the liquid crystal and the photoreactive monomer, and by applying suitable mechanical shearing on the substrates, a cholesteric liquid crystal display with a low threshold voltage and no alignment layer was demonstrated.

• 신재생에너지
• /
• 제3권4호
• /
• pp.8-15
• /
• 2007

Liquid water in flow channel is an important factor that limits the steady and transient performance of PEM fuel cells. A computational fluid dynamics study based on the volume-of-fluid [VOF] multi-phase model was conducted to understand the two-phase flow behavior of liquid water in cathode gas channels. The liquid water transport in $180^{\circ}{\Delta}$ bends was investigated, where the effects of surface characteristics (hydrophilic and hydrophobic surfaces], channel geometries (rectangular and chamfered corners], and air velocity in channel were discussed. The two-phase flow behavior of liquid water with hydrophilic channel surface and that with hydrophobic surface was found very different; liquid water preferentially flows along the corners of flow channel in hydrophilic channels while it flows in rather spherical shape in hydrophobic channels. The results showed that liquid water transport was generally enhanced when hydrophobic channel with rounded corners was used. However, the surface characteristics and channel geometries became less important when air velocity was increased over 10m/s. This study is believed to provide a useful guideline for design optimization of flow patterns or channel configurations of PEM fuel cells.