• 약학회지
• /
• 제54권4호
• /
• pp.240-243
• /
• 2010

High-performance liquid chromatography (HPLC) screening method revealed that a propolis product marketed as a functional food contained an undeclared substance similar to tadalafil, the active ingredient of the prescription drug Cialis$^{(R)}$ approved for the treatment of male erectile dysfunction. In order to identify the illegal additive, the propolis product was extracted with methylene chloride, and the extract was purified further using semipreparative HPLC. The chemical structure of the isolated substance was elucidated based on IR, LC/MS-ESI, and $^1H$- and $^{13}C$-NMR spectroscopy, which showed the characteristics similar to tadalafil. The only difference was the substitution of the methyl group at the piperazinedione ring of tadalafil to the amino group of the identified illegal additive.

• 한국생활과학회지
• /
• 제23권3호
• /
• pp.467-481
• /
• 2014

We investigated the effects of Mulberry leaves fermented enzyme liquid(MLE) addition on the quality of Kimchi which were fermented at $5^{\circ}C$ during 30 days. MLE was added to salted cabbage at concentrations of 0%(C), 0.4%(MLE1), 0.8%(MLE2), and 1.2%(MLE3) (w/w). pH in Kimchi added upon 1.2% of MLE, was higher than that of Kimchi without MLE after 12 days of fermentation. The titratable acidity was increased by the addition of MLE, and particularly Kimchi added 1.2% of MLE showed the slowest changed level. The degree of salinity were decreased in Kimchi with MLE as well as control group. However, MLE1 showed significantly lower salinity than MLE2, MLE3 and control group (p<0.001). L, a, b values of control group indicated significantly higher than the Kimchi with enzyme liquid concentrations(MLE1~MLE3). As compared with the control group, the cutting force in treated groups were increased during the fermentation period, and especially MLE3 showed the highest value of hardness. Moreover, that growth of lactic acid bacteria and total bacteria were inhibited by the addition of MLE. In the sensory assessment, the color, taste, and overall preferences were higher in MLE2 than control group and MLE1, MLE3. The acceptability of MLE as an additive in Kimchi among middle school students was higher than in the control sample, with an optimum additive of 0.8% MLE, based on the lowest volume of leftovers. Therefore, it was confirmed that addition of 0.8% MLE appears to be an acceptable approach to enhance the quality of Kimchi without reduction of acceptability.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.81-85
• /
• 2002

Small angle light scattering and field emission scanning electron microscope have been used to quantify the kinetics of liquid-liquid separation behavior during water vapor(RH52%[$\pm$3%] at 27$^{\circ}C$) quenching (non-solvent induced phase separation, NIPS) of polysulfone/NMP/Alcohol and CPVC/THF/Alcohol, respectively. Time dependence of the position of the light scattering maximum was observed at polysufone dope solutions, confirming spinodal secomposition (SD). while CPVC dope solutions showed a decreased scattered light intensity with a increased q-valuel, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahns linear theory of spinodal decomposition,[1-3] regardless of types of non-solvent additive.

• 한국세라믹학회지
• /
• 제43권8호
• /
• pp.472-478
• /
• 2006

The effect of compositional and processing variables on a nitriding reaction of silicon powder compact and subsequent post sintering of RBSN (Reaction-Bonded Silicon Nitride) was investigated. The addition of a nitriding agent enhanced nitridation rate substantially at low temperatures, while the formation of a liquid phase between the nitriding agent and the sintering additives at a high temperature caused a negative catalyst effect resulting in a decreased nitridation rate. A liquid phase formed by solely an additive, however, was found to have no effect on nitridation for the additive amount used in this research. The original site of a decomposing pore former was loosely filled by a reaction product ($Si_3N_4$), which provided a specimen with nitriding gas passage. For SRBSN (Sintered RBSN) specimens of high porosity, only a marginal dimensional change was measured after post sintering. Its engineering implication for near-net shaping ability is discussed.

• 공업화학
• /
• 제19권6호
• /
• pp.633-639
• /
• 2008

상전환법을 이용하여 폴리설폰, n-메틸피롤리돈과 톨루엔으로 이루어진 제막용액으로부터 고분자 분리막이 제조되었다. 톨루엔은 폴리설폰에 대한 비용매로서 제막용액에 첨가되었으며, 침지용 비용매로는 이소프로필알코올이 사용되었다. 제조된 모든 분리막은 밀집 형상의 표면층과 스폰지 형상의 하부층으로 구성된 이중구조 형태의 비대칭성 구조를 보였다. 첨가된 톨루엔은 제막용액의 열역학적 성질을 변화시켜 열역학적 상분리를 촉진하는 역할을 할 수 있음을 보였으며, 제조된 분리막은 톨루엔을 첨가에 의해 막의 표면층 두께가 증가하는 특성을 보였다. 분리막의 투과 특성을 측정한 결과, 톨루엔이 첨가되었을 때 밀집 표면층의 두께 증가에도 불구하고 거의 동일한 배제율을 유지하면서 투과플럭스는 5배 이상 증대하는 효과를 보였다.

• 전기화학회지
• /
• 제17권3호
• /
• pp.156-163
• /
• 2014

본 연구에서는 불소계 실란을 첨가제로 사용하여 전해액의 열화 반응을 억제함으로써 리튬이온전지의 싸이클 특성을 향상시키고자 하였다. 첨가제로 사용된 trifluoropropyltrimethoxysilane은 리튬염과 카보네이트계 유기 용매로 이루어진 액체 전해질보다 전기화학적 산화, 환원 분해반응이 먼저 일어나 음극 및 양극 표면에서 안정적인 고체전해질계면 (solid electrolyte interphase, SEI) 막을 형성하며, 5 wt.%의 첨가제를 포함하는 경우 가장 우수한 전기화학적 특성을 나타내었다. SEM 및 XPS 분석을 통해 전극 표면에 생성된 피막의 화학 성분을 분석하였으며, 이들 결과로부터 새로운 SEI 형성 첨가제로서 불소계 실란의 가능성을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1705-1710
• /
• 2008

Imidazolium based zwitterions, 1,2-dimethylimidazolium-3-n-propanesulfonate (DMIm-3S) and 1-Butylimidazolium-3-n-butanesulphonate (BIm-4S), were synthesized, and utilized them as additive for Li ion cell comprising of graphite anode and $LiCoO_2$ cathode. The use of 10 wt% of DMIm-3S in 1 M $LiPF_6$, EC-EMCDMC (1:1:1 (v/v)) resulted in the increased high rate charge-discharge performance. The low temperature performance of the Li ion cells at about −20 ${^{\circ}C}$ was also enhanced by these zwitterion additives. The DMIm- 3S additive resulted in the better capacity retention by the Li-ion cells even after 120 cycles with 100% depth of discharge (DOD) at 1 C rate in room temperature. Surface morphology of both graphite and $LiCoO_2$ electrode before and after 300 cycles was studied by scanning electron microscopy. An analogous study was performed using liquid electrolyte without any additive.

• Tribology and Lubricants
• /
• 제8권1호
• /
• pp.48-55
• /
• 1992

The friction characteristic of plastics (PTFE, Nylon, Acetal and phenolic) was studied on the lubricated condition with a pin on disk machine. Mineral oil without additive (base oil) and water were used as liquid lubricants at the controlled temperature. From the experimental work, it was found out that the coefficient of friction of plastics was controlled by the mechanical properities of plastic more than that of liquid for various load and temperature. Viscosity of liquid has affected on the friction only at low temperature under lighb load. Among the tested plastics, the coefficient of friction of PTFE was the lowest under light load and at low temperature while Nylon at medium load and temperature, and Acetal at heavy load and high temperature. The coefficient of friction of soft plastics like PTFE and Nylon were increased as the load and temperature were increased, while that of hard plastic (Acetal) was decreased and that of thermo setting plastic (phenolic) was mixed. Also for soft plastics, the coefficient of friction under heavy load was always higher than that under light load, while hard plastic was vice versa.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1014-1019
• /
• 1998

As results of the study on the sinterbility of YIG at the low temperature using CuO as additive CuO com-pound which contain {{{{ { {Fe }_{2 }O }_{3 } }} was shown liquid in sintering process. YIG crystal dissolved into CuO compound liquid phase and then Y element which is considered no solubility in solid CuO compound moved to the grain during cooling. The abnormal grain growth up to 150${\mu}{\textrm}{m}$ at CuO 8.6mole% was shown due to shape accomdation reaction and local liquid distribution. The apparent density of YIG shows minimum at CuO 8.6 mole% due to abnormal grain growth and the saturation magnetization decrease dramatically at 32.5mole% due to orthoferrite formation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1184-1189
• /
• 1990

In order to investigate liquid fuel filming over the intake manifold wall, an electrode-type probe has been developed by lines of authors and this probe was employed in a single cylinder two and four-stroke cycle engine and in a four cylinder four-stroke engine operated by neat methanol fuel. The performance of the probe was dependent upon several parameters including the liquid fuel layer thickness, temperature, additive in the fuel, and electric power source (i.e., AC and voltage level) and was independent of other variables such as direction of liquid flow with respect to the probe arrangement. Several new findings from this study may be in order. The flow velocity of the fuel layer in the intake manifold of engine was about (if the air velocity in the steady state operation, the layer thickness of liquid fuel varied in both the circumferential and longitydinal directions. In the transient operation of the engine, the temporal variation of fuel thickness was determined, which clearly suggests that there was difference between fuel/air ratio in the intake manifold and that in the cylinder. The variation was greatly affected by the engine speed, fuel/air ratio and throttle opening. And the variation was also very significant from cylinder to cylinder and it was particularly strong different engine speeds and throttle opening.