• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.235-245
• /
• 2003

The goal of the present study was to evaluate the effects of PNAM appliance and cheiloplasty on alveolar molding. Samples consisted of 16 unilateral cleft lip and palate infants (10 males and 6 female, mean age=37.0 days after birth, average alveolar cleft gap=10.46m), who were treated with PNAM appliances by one orthodontist and rotation- advancement cheiloplasty by one surgeon in Seoul National University Hospital. Average duration of alveolar molding treatment was 13.10 weeks and these patients were recalled at average 8.31 weeks after cheiloplasty. These patients' models were obtained at initial visit (T0, mean age : $37.0\pm27.89$ days after birth), after successful alveolar molding (T1, mean age : $119.25\pm40.18$ days after birth), and after cheilopasty (T2, mean age : $190.81\pm42.78$ days after birth). Seven linear and five angular variables were measured using 1 : 1 photometry and soft ware program(V-ceph. Cybermed. Seoul, Korea). Paired t-test was performed to investigate statistical significance at p<0.05 level. 1 The posterior parts of alveolar segments were the stable structures during alveolar molding treatment period and after cheiloplasty in infants. 2. The closure of cleft gap during alveolar molding was usually due to backward bending of the whole part of the greater segment. 3. Although forward growth of the greater segment was hindered by alveolar molding, it resumed after cheiloplasty. 4. Increase of anterior inter-segment angle after cheiloplasty was due to the molding effect of the lip scar pressure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.622-627
• /
• 2008

Experiment of active noise control on supersonic jet noise was conducted by use of microjet injection. The microjets were injected to the shear layer of the main jet through 22 small holes at the lip of a rectangular nozzle. Based on the measurement of farfield sound pressure, it was found that the jet noise was effectively reduced by several dB(in some cases up to 10 dB). The power levels of all measurement points were also reduced by use of microjet injection. The microjet affected not only the broadband noise but also the screech tone noise. The sound pressure level, the frequency of the screech tone, and the structure of the jet could be changed by the microjet. Flow visualization with schlieren technique was also made to observe the effect of microjet on the flow field.

• Steel and Composite Structures
• /
• v.38 no.6
• /
• pp.617-635
• /
• 2021

This paper numerically investigated the behavior of built-up square concrete-filled steel tubular (CFST) columns under combined preload and axial compression. The finite element (FE) models of target columns were verified in terms of failure mode, axial load-deformation curve and ultimate strength. A full-range analysis on the axial load-deformation response as well as the interaction behavior was conducted to reveal the composite mechanism. The parametric study was performed to investigate the influences of material strengths and geometric sizes. Subsequently, influence of construction preload on the full-range behavior and confinement effect was investigated. Numerical results indicate that the axial load-deformation curve can be divided into four working stages where the contact pressure of curling rib arc gradually disappears as the steel tube buckles; increasing width-to-thickness (B/t) ratio can enhance the strength enhancement index (e.g., an increment of 1.88% from B/t=40 to B/t=100), though ultimate strength and ductility are decreased; stiffener length and lip inclination angle display a slight influence on strength enhancement index and ductility; construction preload can degrade the plastic deformation capacity and postpone the origin appearance of contact pressure, thus making a decrease of 14.81%~27.23% in ductility. Finally, a revised equation for determining strain εscy corresponding to ultimate strength was proposed to evaluate the plastic deformation capacity of built-up square CFST columns.

• Archives of Plastic Surgery
• /
• v.50 no.5
• /
• pp.468-477
• /
• 2023

Background This article describes the development of the Myanmar Articulation, Resonation, Nasal Emission, and Nasal Turbulence test for children with cleft lip and palate (CLP), and evaluation of its validity and reliability. Methods It was created by three Thai researchers and a Burmese research assistant based on Burmese phonology. The content validity was evaluated by six Burmese language experts. All test items were divided into three groups: high-pressure oral consonants, low-pressure oral consonants, and nasal consonants. Results All items (58-word and 32-phrase/sentence) gave an excellent level of the expert agreement (item-level content validity indexes = 1.00). The target items were illustrated as color pictures. Each picture was clearly drawn and easy to identify. As a pilot study of face validity, all pictures were administered to 10 typical-developing children. The actual testing was assessed by 10 CLP children, and the developed test was analyzed through consultation of the Burmese teachers and interpreters from a speech camp. Testing scores for a total including three groups of target items were shown acceptable for internal consistency reliability (ranged from 0.4 to 0.88). Conclusion The constructed test is valid in terms of its content.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1976.06a
• /
• pp.87.1-87
• /
• 1976

Bekesy measured the sound transformation system of the middle ear 49 years ago. According to his reports, a ratio between the size of ear drum and the size of oval window is 17 : 1, and the lever function of the ossicles is physiologically 1.3 : 1. Therefore, the hearing might be aggravated to 27.5㏈ in the case of the vanishment of 3 ossicles. In 1952, Wullstein reported 5 types of tympanop-lasty and the fourth type among them was especially named for the sound-protection. The oval window is only exposed by the sound pressure and the round window is not exposed. According to the application by this idea, the post-operative hearing might be improved until 27.5㏈. Mean while, in 1942, Onchi verified through his experiment that the results of Bekesy's measurement was not completely conformed to Onchi result. Bekesy measured the sound pressure on the stapes plate of the oval window, on the other hand, Onchi measured the sound pressure on the surface of the perilymph of the oval window after removing the stapes plate(Fig. 1).(Figure omitted) The difference of their experiment is recognized that the impedance of the stapes plate exists or not (Fig. 1). Both Audiogrums are compared as Fig. 2. The result of IV type of tympanoplasty is success ful in 54% as the Table 1. (Table Omitted) The reason of unsatisfactory is caused by the thick and unmovable window-membrane and by the closing of air passage to the round window. The closing of the air passage to the round window is occurred by the adhesion between the grafting membrane and the surface of promontorium. In order to preserve this adhesion, I produce to transplantate the mucous membrane of the lip to the bone surface of tympanic cavity after removing the granulation tissue of the tympanic cavity and to form a membranous canal for the sake of air passage (Fig. 3). (Figure Omitted) The post-operative hearing by this method is shown as Fig. 4, 5. In other words, the post-operative sound pressure entered into the cochlea directly, by way of the oval window only, not by way of the round window, as a theorie of the sound protection. (Figure omitted)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.10 s.241
• /
• pp.1156-1162
• /
• 2005

In this study, a noble method is proposed to prevent the edge overcoating (EOC) that may develop near the edge of the steel strip in the gas wiping process of continuous hot-dip galvanizing. In our past study (Trans. of the KSME (B), Vol. 27, No. 8, pp. $1105\~1113$), it was found that EOC is caused by the alternating vortices which are generated by the collision of two opposed jets in the region outside the steel strip. When the two opposed jets collide at an angle much less than $180^{o}$, non-alternating stable vortices are established symmetrically outside the steel strip, which lead to nearly uniform pressure on the strip surface. In order to deflect both jets downward by a certain angle, a cylinder with small diameter is installed tangentially to the exit of the lower lip of the two-dimensional jet. In order to find an optimum cylinder diameter, the three dimensional flow field is analysed numerically by using the commercial code, STAR-CD. And the coating thickness is calculated by using an integral analysis method to solve the boundary layer momentum equation. In order to compare the present noble method with the conventional baffle plate method to prevent the EOC, the flow field with a baffle plate is also calculated. The calculation results show that the tangentially installed cylinder at the bottom lip of the jet exit is more effective than the baffle plate to prevent EOC.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.15-30
• /
• 1983

This study was to investigate the effect of functional pressures of the tongue and lips on the incisor relationship. The incisor relationship was devided into two categories; one is vertical relationship which is subdevided into open bite, normal overbite and deep bite on the basis of overbite, and the other is anteroposterior relationship which is subdevided into cross bite, normal overjet and large overjet on the basis of overjet. The functional tongue and lip pressures exerted to incisors were measured with subminiature pressure sense from the 99 subjects, 19 of normal overbite and overjet, 26 of open bite, 18 of deep bite, 17 of cross bite and 19 of large overjet with age of 17-20, and cephalograms were taken from the same subjects. Functional pressures were analyzed and correlated to craniofacial veriables. The results of present investigation led to the following conclusions. 1. There were no differences in functional and maximum pressures by the tongue and lips exerted to maxillary incisors between normal occlusion, open bite, deep bite, cross bite and large overjet. 2. Significant differences in functional and maximum pressures by the tongue and lips exerted to mandibular incisors have been shown to exist between open bite and deep bite, but no differences between cross bite and large overjet. 3. Equilibrium between tongue pressures and lip pressures did not exist. 4. Significant differences in the ratio of upper functional and maximum pressures to lower pressures of the tongue and lips exerted to upper and lower incisors have been shown to exist between open bite and deep bite, and no differences between cross bite and large overjet. 5, There was significant correlation between functional and maximum pressures exerted to mandibular incisors and craniofacial variables, but not significant correlation between functional and maximum pressures exerted to maxillary incisors and craniofacial variables.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.16 no.1
• /
• pp.33-48
• /
• 2005

Differential diagnosis of articulation and resonance problems in the cleft lip and palate speech is required for evaluating various factors contribute to speech problems such as VPI, dental occlusion, palatal fistulae, learning. However, validity of speech stimuli is current issue to evaluate accurately each problem in cleft speech. This study was conducted to investigate speech stimuli using in the clinical setting and review the literatures and articles published 1990 to 2005 for helping develop standardized speech samples. The results were recommendation to evaluate properly velopharyngeal function when conducting a diagnostic evaluation as follows : 1) In identification hypernasality, the speech stimuli should be included low pressure consonants to eliminate effects of nasal emission, compensatory articulation. 2) Speech stimuli should be consist of visual, front sounds to eliminate compensatory articulation and to stimulate easily. 3) Regarding early diagnosis and treatment, speech stimuli need to develop for infants and preschooler. 4) Stimulus length on nasalance scores should be at least 6 syllables. 5) In phonetic context on nasalance scores, /i/ vowel should be take into consideration excluding paragraph. 6) Connected speech stimuli should be developed for evaluating intelligibility and VP function.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.63-68
• /
• 2001

SG-365 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ATM E813-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_IC. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases the scattering of them and tunneling and shear lip by the side groove.