• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.910-923
• /
• 1992

본 연구에서는 가장 응용 빈도가 큰 크랭크-레버 4절 기구를 제작하고 강성과 유연성 두가지 베어링을 사용하여 연결봉과 레버의 중점의 변형률을 스트레인 게이지 로 측정하여 앞의 이론 논문에서 수행한 수치해석의 결과와 비교 검토하였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.455-462
• /
• 2016

Recently, followed by rapid growth of robotics field, multi-linkage mechanism which can even pass by rough road is getting lots of attention. In this paper, I focused on Jansen mechanism. It's a kinematics object which is named after Dutch artist Theo jansen. Jansen mechanism embraces structure and mechanism which creates locomotion with the combination of the power and simple structure. Theo jansen suggests a 'Holy number'. It's an ideal ratio of leg components length. However, if there's desired gait locomotion, you have to adjust the ratio and the length. But even slight change of the length could cause a big change at the end-point. To solve this problem, I suggest a reverse engineering method to get a ratio of each links by nonlinear optimization with pre-set desired trajectory. First, we converted a movement of the joint of Jansen mechanism to vectors by kinematics analysis of multi-linkage structure. And we showed the trajectory at the end-point. After that, we set desired trajectory which we found most ideal. Then we got the length of the leg components which draws a trajectory as same as trajectory we set, using Multi-objective genetic algorithm toolbox in MATLAB. Result is verified by Edison designer and mSketch. And we analyzed if it could pass through the obstruction which is set dynamically.

• 로봇학회논문지
• /
• 제12권2호
• /
• pp.107-115
• /
• 2017

In this paper, four-bar linkage mechanism for the knee joint is developed which is used in prosthetics. But unlike the prosthetics, the feature of this mechanism is that the instantaneous center of rotation of the four-bar linkages can be moved behind the ground reaction force vector so that it can be passively supported without any external power. In addition, this mechanism is developed similar to the structure of the human knee joint for eliminating the sense of heterogeneity of the wearer. In order to design the mechanism with these two objectives, optimization design process is done using the PIAnO tool and detailed design is carried out through optimized variable values. The developed mechanism is attached to the robot which can assist the hip and ankle joints. In order to verify the operation of the developed knee mechanism, an insole type sensor was attached to the shoes to compare data values before and after wearing the robot. Result data showed that wearer wearing the exoskeleton robot with the knee mechanism was the same value regardless of whether the heavy tool is loaded or not.

• 한국지능시스템학회논문지
• /
• 제21권2호
• /
• pp.159-164
• /
• 2011

본 연구에서는 4절 링크 이론(four-bar linkage mechanism)과 얀센 메커니즘(Jansen mechanism)을 기반으로 다관절 보행 로봇(multi-legged walking robot)인 게(crab) 로봇을 제작하고, 게 로봇의 움직임에 대하여 기구학적인 해석을 제시한다. 제작된 게 로봇은 영상 획득을 위하여 카메라를 장착하였고, 장애물 회피를 위하여 3조의 초음파 센서를 가지고 있다. 또한 RF통신으로 외부에 영상 정보를 전달하며, Blue-tooth 통신 모듈을 장착하여 외부로부터 부여된 임무를 수행할 수 있다. 게 로봇의 설계와 제작을 하기 위해서 필요로 하는, 로봇 다리의 움직임을 알기 위해서는 관절 변수와 다리 끝단의 위치 및 자세와의 관계를 얻어야 한다. 따라서, 제안된 기구학적 해석은 로봇의 설계와 제작에 있어서 많은 도움을 주며 중요한 과정이다.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.74-79
• /
• 2021

Generally, multi-legged walking robots have excellent mobility in rough and uneven terrain, and they are deployed for the safety of rescuers in various disaster environments. However, as each leg is driven by a number of actuators, it leads to a complicated structure and high power consumption; therefore, it is difficult to put them into practical use. In this article, a new concept is proposed of a walking robot whose legs are driven by a complex linkage structure to overcome the deficiencies of conventional multi-legged walking robots. A double crank-rocker mechanism is proposed, making it possible for one DC motor to actuate the left and right movements of two neighboring thighs of the multi-legged walking robot. Each leg can also move up and down through an improved cam structure. Finally, each mechanism is connected by spur and bevel gears, so that only two DC motors can drive all legs of the walking robot. The feasibility of the designed complex linkage mechanism was verified using the UG NX program. It was confirmed through actual production that the proposed multi-legged walking robot performs the desired motion.

• Structural Engineering and Mechanics
• /
• 제35권1호
• /
• pp.83-98
• /
• 2010

In this paper, the mass optimization of four bar linkages is carried out using genetic algorithms (GA) with single and dual constraints. The single constraint of bending stress and the dual constraints of bending and buckling stresses are imposed. From the movement response of the bar linkage mechanism, the analysis of the mechanism is developed using the combination of kinematics, kinetics, and finite element analysis (FEA). A penalty-based transformation technique is used to convert the constrained problem into an unconstrained one. Lastly, a detailed comparison on the effect of single constraint and of dual constraints is presented.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1296-1301
• /
• 2002

In recent years, the pathology in the colon grows up annually since people of all ages prefer to have less fiber and more fat food. Therefore, the colonoscopy is generalized in developed countries. But it requires much time to acquire a dexterous skill to perform an operation and the procedure is painful to the patient. Therefore, some studies on the development of autonomous colonoscope are carried out. In this paper, we propose a new and simple locomotive mechanism that can be propelled by elliptic motion of a leg. It has several legs that have constant phase difference each other and those legs are disposed along the upper and lower of the body. In order to evaluate the performance of locomotive mechanism, we carried out the simulations of moving characteristics and the experiments in the colon of a dead pig.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.384-388
• /
• 2016

This paper proposed a m.Sketch to search the optimal link lengths for a legged walking robot. In order to apply the m.Sketch for the proposed, set the design parameters of the constraints and use the m.Skecth to get optimal GL(Groud Length) and GAC(Ground Angle Coefficient). The legged robot designed based on four-bar linkage theory and Theo Jansen mechanism. The stride length of the legged walking robot was defined based on the proposed kinematic analysis. Use the Edison Design m.Sketch simulate and find the optimal link length having the best of the Ground Length (GL) and Ground Angle Coefficient(GAC). And use these length implemented the Theo Jansen mechanism both in Science box parts and acrylic. In addition to the further expansion of the legs to reach the goaltranslating heavy objects or person.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.132-138
• /
• 2004

In a vacuum circuit breaker mechanism, a spring-actuated linkage system is used to satisfy the desired opening and closing characteristics of electric contacts. If the type and structure of the linkage system required to the circuit breaker is predetermined, the stiffness, free length and attachment points of a spring become the important design parameters. In this paper, based on the energy conservation that the total system energy is constant throughout the operating range of the mechanism, a systematic procedure for optimizing the spring design parameters is developed and applied to the simplified mechanism of a circuit breaker. Then, in order to consider the complex dynamics of the circuit breaker mechanism rather well, the developed procedure is converted to the environment of a multi-body dynamics program ADAMS.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.169-170
• /
• 2009