• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.16-22
• /
• 2014

Automotive NVH on brake operation is mainly caused by a coupling action of vehicle speed and inter parts friction and its frequency occurs over a broad band of 0.1 kHz~10 kHz. Especially, squeal noise, being a self-excited vibration generated by friction force between drum and lining, occurs over 1 kHz and consequently dynamic instability is induced when friction energy is applied to a brake vibration system. The squeal strongly depends on nonlinear properties influenced by the material of lining, velocity of vehicle, and the dynamic properties of a brake system. The dynamic properties are considered as a main influential design factor to squeal noise, however the analysis of the properties are rarely facilitated due to arbitrariness of shape by wearing down. In this paper, we research generating tendency of squeal noise through complex eigenvalue analysis, tracking drum brake's unstable modes in accordance with the wear shape of drum and lining such as tapered and bellmouth shape, and analyze computed unstable modes by variable shapes.

• 한국터널지하공간학회 논문집
• /
• 제13권3호
• /
• pp.199-214
• /
• 2011

균열, 누수, 박락, 철근노출, 부식, 탄산화 등은 터널 라이닝 건전도 평가항목으로 그 중에서 균열은 주요한 영향요인이다. 1980년 이후로, NATM은 터널의 굴착방법과 링폐합의 지반공학적 개념의 보급과 함께 넓게 적용되었으며, 라이닝에 발생된 균열의 연구도 진행되었으나 종균열에 제한된 연구가 주로 수행되었다. 본 논문에서는 11개의 공용중인 NATM터널의 정밀안전진단 결과를 활용하여 공간적인 위치 및 형태별로 분석하여 터널별 공통된 7개의 균열을 정의, 원인 및 분석, 사례 등을 나타내었다. 종류별 균열은 CCD스캐너 이미지를 3차원으로 분석하여 향후 NATM터널 정기점검 및 정밀안전진단 시 유익한 사례가 휠 수 있도록 하였다.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.131-147
• /
• 1986

The purpose of this study was to observe the color matching of lining or filling materials according to the remaining tooth material. Twenty-seven freshly extracted human central incisors were used in this experiments. The teeth were stored in saline solution at room temperature after extraction. All teeth were cut parallel to the tangent to height of contour on labial surface from the lingual surface until the pulp were completely removed. Then 27 teeth were devided into 0.5mm, 1.0mm and 1.5mm reduction groups according to the thickness of cutting the lingual surfaces of teeth. The specimens of control group were three teeth of 27 teeth with cutting the lingual surface same mode as above described. In the specimens of experimental groups, 8 kinds of lining and filling materials; FUJI IONOMER TYPE II (G-C Co. Japan), LINING CEMENT (G-C Co. Japan), Dycal (Caulk, U.S.A.), CLEARFIL F II (Kuraray Co. Japan), Crown Bridge & Inlay Cement (G-C Co. Japan), Copalite (Harry J. Bosworth Co. U.S.A.), HY-BOND (G-C Co. Japan) and LIV-CENERA (G-C Co. Japan); applied on the back of 24 teeth with 0.5mm, 1.0mm and 1.5mm cut thickness of lingual surfaces. Three teeth of control group did not applied linging or filling materials on the back of 3 kinds of different thickness of cutting the lingual surfaces. The absorbances of total 27 specimens were obtained by reflection spectrophotometer. (Cary 17 D, Varian Co, U.S.A.) The following conclusions were drawn from above the results; 1. The absorbance patterns in both experiment and control groups were gradually decreased with increasing wavelength of spectra. 2. The absorbance patterns were not decreased in relation to the kinds of lining or filling materials, but the amount of the remaining tooth materials. 3. In 0.5mm reduction group, FUJI IONOMER TYPE II, LINING CEMENT, LIV-CENERA and Copalite applied on the back of cut lingual surface showed similar absorbance patterns as control group. 4. The specimens which were reduced up to 1.0mm thickness and lined with FUJI IONOMER TYPE II and LINING CEMENT showed the comparable absorbance patterns to the control group. 5. In case of HY-BOND application after 1.5mm reduction were observed the similar absorbance pattern as compared with control group. 6. When Dycal, CLEARFIL and Crown Bridge & Inlay Cement were applied to cut teeth surfaces, there were much differences of absorbance between control groups and experimental groups.

• 복식문화연구
• /
• 제13권3호
• /
• pp.414-424
• /
• 2005

This study was aimed to alter slacks pattern of ready-to-wear clothing appropriate for the lower body types of male university students of sports majors. The subjects used for this study were 151 male sports majors between $18{\sim}27$ years of age. Characteristics of the respondents were ascertained by means of questionnaires and an evaluation of a total of 36 lower body features. The characteristics of the lower body were depended on sport activities. In particular, bodybuilding students demonstrated a somatotype with an increased circumference, depth, and width of the thigh and lower body. The somatotypes were classified into 3 types by means of a cluster analysis employing 5 factors. The bodybuilding was selected for alter slacks pattern because of the grand variation of lower body types. A lining evaluation of slacks pattern was made for the male sports collegians in bodybuilding-major. The results of evaluation shows that the research pattern was better than a ready-made slacks pattern. Specially the hip and thigh parts were more comfortable to sports major students.

• 복식문화연구
• /
• 제10권6호
• /
• pp.709-717
• /
• 2002

In the apparel industry, the technology has been advanced rapidly. The use of 3D scanning systems fur the capture and measurement of human body is becoming common place. Three dimensional digital image can be used for design, inspection, reproduction of physical objects. The purpose of this study is to develop a method that drafts men's basic bodice pattern from scanned 3D body surface shape data. In order to pursue this purpose the researchers developed pattern drafting algorithm. The 3D scanner used in this study was Cyberware Whole Body Scanner WB-4. The bodice pattern drafting algorithm from 3D body surface shape data developed in this study is as follows. First, convert geometric 3D body surface data to 3D polygonal mesh data. Second, develop algorithm to lay out 3D polygonal patches onto a plane using Auto Lisp program. The polygon meshes are coplanar, and the individual mesh is continuously in contact with next one The bodice front surface shape data in polygonal patches form was lined up in bust and waist levels. The back bodice was drafted by lining up the polygonal mesh in scapula, chest, and waist levels. in the drafts, gaps between polygons were formed into the darts.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.75-84
• /
• 2009

The following research analyzed the sewing teaching of the tailored jacket shown in fashion textbooks, which are currently used in universities and educational organizations in the fashion industry. To analyze the sewing teaching of tailored jackets, we analyzed 35 textbooks in the market. Among them we used 14 textbooks which dealt with the patter formation method of tailored jackets, and cutting and sewing methods. First, the stitching direction and the location of attachment varied. The type of sticking tape and its position also differed, emphasizing the need to make an institutionalized education material which is based on the characteristic of the fabric and its silhouette. Second, controlling the ease length of the right side sewing princess line, or information about the shoulder line and sleeve line of the notch as not specifically shown in the textbooks. Furthermore, not many textbooks showed how to pull the lower part of the texture out of sight, nor did they explain why this needed to be done. Third, the lining is usually slightly larger than the outer texture of the clothing, as the lining is usually tugged in the sewing process, and this method makes the clothes more comfortable. The method of sewing the princessline $0.2{\sim}0.3cm$ outside the outer pattern was the most recommended. The center-back side was usually 2cm in activity measurements, but it turned out that a textbook which required ease treatment on the shoulder line did not do so on the lining material. The textbooks used in this research dealt only with how to manufacture a tailored jacket without full explanation about textures which could influence the manufacturing. The production method and process differed between different textbooks, showing the need to make a institutionalized education material. In a quickly-changing era where there is rapid change in the dressmaking procedure, we need to help students understand the process more easily through a formalized education process.

• 한국터널지하공간학회 논문집
• /
• 제15권1호
• /
• pp.1-11
• /
• 2013

강섬유 보강콘크리트는 NATM 터널의 숏크리트와 세그먼트 등 라이닝에 주로 적용된다. 터널화재시 라이닝은 화재에 직접적으로 노출되기 때문에 고온노출시 SFRC의 성능변화는 매우 중요하다. 본 연구에서는 고온에 노출된 강섬유보강콘크리트의 인장성능을 DPT 실험을 통하여 검토하였다. 고온 노출온도, 강섬유 혼입률 및 종류가 파괴형태, DPT 인장강도, 실험의 변동계수에 미치는 영향을 분석하였다. 실험결과, 강섬유 보강으로 인한 잔존인장강도의 증가를 확인하였으며, 혼입률이 증가할수록 효과적임을 확인하였다. 그러나, DPT 인장강도는 고온노출로 인한 파괴면의 변화를 고려할 수 없기 때문에 파괴에너지의 고찰이 필요한 것으로 판단된다.

• Advances in materials Research
• /
• 제9권3호
• /
• pp.233-250
• /
• 2020

In this study, a chitosan based coating method was developed and applied on the shoe lining leather surface for evaluating its inhibition to bacterial and fungal attacks. At first, chitosan was prepared from raw prawn shells and then the prepared chitosan solution was applied onto the leather surface. Secondly, the characterization of the prepared chitosan and chitosan treated leather was performed by solubility test, ATR-FTIR, XRD pattern, SEM and TGA. Evaluation of antimicrobial efficacy of chitosan was assessed against two gram positive, two gram negative bacteria and a reputed fungi by agar diffusion test. The results of this study demonstrated that chitosan took place in both the surface of collagen fibres and inside the collagen matrix of crust leather. The chitosan showed strong antimicrobial activities against all the tested microorganisms and the inhibition increased with increasing percentage of chitosan. Therefore, the prepared chitosan in this study can be an environment friendly biocide, which functions simultaneously against different spoilage bacteria and fungi on the finished leather surface. Thus by using the prepared chitosan in shoe lining leather, the possibility of microbial attack during shoe wearing can be minimized which is one of the important hygienic requirements of footwear.

• 한국생활과학회지
• /
• 제23권4호
• /
• pp.665-680
• /
• 2014

The purpose of this study was to develop the construction process of orthopedic compression garments (OCG) for balancing of the left and right lumbar muscle power and strength to prevent low back pain. One male subject having low back pain was involved for investigating of the lumbar muscle power. EMG (Telemyo DTS2, Noraxon, U.S.A) was measured with/ without 3 types of waist assistant belt around the waist area of the subject. Based on the electromyogram value of left and right body, OCG were constructed as follows. Firstly, stretchable t-shirts type with supportive waist belt was selected for the convenience of wearing and laundering the OCG. The design lines of the front and back waist parts were created depending on the anatomy of the torso. Secondly, 3D pattern was developed using 3D Clo, RapidForm XOR, 2C-AN, and Yuka CAD program to increase the fit of the OCG. Finally, stretchable power-net was layered as linings in two ways, a single lining and double layered linings, and evaluated measuring lumbar muscle EMG by five subjects with low back pain. As the results, they were effective to balance the left and right lumbar muscle power and strength. Also the OCG with the double layered power-net lining was superior to the one layered lining in terms of fit and comfort.

• 한국의류학회지
• /
• 제40권5호
• /
• pp.844-854
• /
• 2016

In order to understand the current state of production and pattern design of circular knitted jackets, this study selected 11 female clothing brands based from the "2012/2013 Korea Fashion Brand Yearbook" and interviewed the staff in charge of patterns at the companies. Polyester and polyurethane were found to be synthesized and used for the outshell of circular knitted jackets, alternatively natural fabric cotton or wool were synthesized with rayon. As for the structure of circular knitted materials, Ponte Di Roma knitting structure (a modified form of a double knit) was most often used. Surveying the use pattern and the parts for padding cloth, six responded that they used elastic padding cloth. As for circular knitted jackets with inner lining, elastic padding cloth was attached to all parts (front, back, side panel, and collar - except for sleeves) of the basic bodice pattern. Eight responded that they did not use a basic pattern when designing a pattern, which exceeds the majority. All respondents answered yes to the question on if there is any difference in designing a pattern for a woven jacket and a circular knitted jacket. It was found that they designed a pattern that considered shrinkage and elongation, which are the features of circular knitted fabric. Shrinkage and elongation were the features of a fabric material most considered when designing patterns for a circular knitted jacket.