• Korean Journal of Environment and Ecology
• /
• v.30 no.6
• /
• pp.970-976
• /
• 2016

Determining age structure of the population of an endangered species is critical because it could provide basic information about population dynamics. In this study, we assessed the possibility if the growth lines on dorsal scutes of the national monument as well as endangered Reeves' turtle (Mauremys reevesii) can reliably estimate actual ages of the 100 turtles of which actual ages were known and have been housed in Seoul Zoo. We counted the number of growth lines on the first four dorsal scutes and the first left and right lateral scutes of each turtle and compared those with their known actual ages. Ages estimated by the growth lines were overestimated at between 1 and 5 actual ages, but underestimated at between 6 and 9 actual ages, indicating that age estimation using growth lines is only partially applicable at actual ages of less than 6 years old. In addition, using length and width of turtle's dorsal plates, we produced growth curves with equations to estimate actual ages of females combined with juveniles, but its application to estimate actual ages was not reliably possible because all subject turtles which used were at relatively young ages. In conclusion, when estimating actual ages of Reeves' turtles using the number of growth lines on the dorsal scutes, it is recommend to use minimum values at less than 6 lines, but use maximum values at more than 7 lines. As the first study which estimated actual ages of a turtle species using growth lines on the dorsal scutes in Korea, our results could be useful to estimate ages of the endangered Reeve's turtles in the field although its application might be limited.

• Journal of the Korean earth science society
• /
• v.28 no.7
• /
• pp.847-856
• /
• 2007

The Planetary nebula NGC 6881 displays quadrupole morphology and it also has a jet feature in its image. We investigated the line profiles of the optical region spectral emission lines, using the Hamilton Echelle Spectrograph (HES) at the Lick observatory. The HES data obtained in this study was the radiation coming from the inner region within the diameter of 4 second of arc. Expansion velocity was obtained, based on the strong emission line profiles of e.g. H, Hel, Hell, [OIII], [NII], [ArIII], [SII], and [SIII}, using the IRAF and StarLink/Dipso reduction packages. The HI recombination lines showed one single peak profile, while the He and forbidden strong lines displayed double peaks. The results of this study show that the outflow velocity of gas increases radially outwards due to the central stellar radiation pressure. It was concluded that three central rings appeared in the HST image are the result of a combined structure of bipolar cones (seen in e.g. HI lines) and a ring (seen in He, [SIII] lines) in projection.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.5
• /
• pp.352-359
• /
• 2001

Cookie baking properties and relationships between cookie baking properties and flour characteristics were evaluated for two years, 1997 and 1998, and at two locations, Suwon and Deokso, with Korean winter wheat cultivars and lines. Cookie baking parameters, except for cookie diameter and top grain score, were influenced by locations and years. Chokwang, Suwon 274, Suwon 275, Suwon 277 and Urimil showed larger cookie diameter and excellent top grain score compared to the other Korean winter wheat cultivars and lines. Among the flour characteristics, protein content, damaged starch content, alkaline water retention capacity and flour swelling volume showed high positive correlation coefficients with cookie baking parameters. Friabilin-present lines showed larger cookie diameter, suitable surface structure of cookie and softer snapping force than the friabilin-absent lines.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.663-675
• /
• 2004

The plastic arts is used when designers draw inspirations to create fashion design. The author referred to fashion magazines for designing ideas of Mondrian＇s geometrical abstract painting in practical applications used by designers in Paris, Italy, London and New York during the 10-year period(1991-2000). The collections of data were analyzed as following: ◇ Fashion Designing Idea 1. Matching Idea The art is reproduced in the design as how it is with no transformation. First, the painting＇s complete figure is reproduced on the entire or parts of clothing. Second, the painting＇s partial figure is reproduced on the entire or parts of clothing. 2. Contrasting Ideas The composition elements in Mondrian＇s geometrical abstract painting, for example, structures of shapes, vertical and horizontal lines and different colors are applied in the design. First, one particular shape in painting is transformed into different shape of square, circle or triangle and reproduced in designing. Second, one particular shape in painting is disassembled and then reshaped into different form in reproduction. Third, additional lines are put in to create different look from the original painting. Forth, existing lines are extended over the boundary to create different look from the original painting. Fifth, achromatic colors: black and white, and three basic colors: red, blue and yellow in the original painting are modified into different shades or color scheme is increased in broad range.

• Journal of Sensor Science and Technology
• /
• v.30 no.3
• /
• pp.170-174
• /
• 2021

As the rising attention to the medical and healthcare issue, Bio-MEMS (Micro electro mechanical systems) platform such as bio sensor, cell culture system, and microfluidics device has been studied extensively. Bio-MEMS platform mostly has high resolution structure made by biocompatible material such as polydimethylsiloxane (PDMS). In addition, three dimension structure has been applied to the bio-MEMS. Lithography can be used to fabricate complex structure by multiple process, however, non-rectangular cross section can be implemented by introducing optical apparatus to lithography technic. X-ray lithography can be used even for sub-micron scale. Here in, we demonstrated lines with round shape cross section using the tilted gold absorber which was deposited on the oblique structure as the X-ray mask. This structure was used as a mold for PDMS. Molded PDMS was applied to the cell culture platform. Moreover, molded PDMS was bonded to flat PDMS to utilize to the sub-micro channel. This work has potential to the large area bio-MEMS.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.70-77
• /
• 2014

In this work, we studied basic characteristics of transmission lines employing various PSS (periodic strip structure) on silicon substrate for application to a miniaturization of RF components. According to the results, the transmission lines employing various PSS showed wavelength shorter than conventional coplanar waveguide due to their strong wave characteristics. Especially, with-contact structure was most effective for a miniaturization of RF component. Concretely, the size of the transmission line employing with-contact was only 4.39 % of the conventional coplanar waveguide, According to the bandwidth extraction result, the bandwidth of the transmission lines employing various PSS structures were wider than 384 GHz. Above results indicate that the transmission lines employing various PSS can be effectively used for application to a broadband and miniature RF component, and especially, with-contact is most effective for a miniaturization of RF components.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.5
• /
• pp.938-945
• /
• 2005

For elucidating excessive growth of biofilm that subsequently leads to the clogging problem in a small town's sewer lines of Wisconsin, the FISH method was employed. At the beginning of the simulated experiments, ${\beta}$-subclass proteobacteria prevailed in runs fed with industrial wastewater, while ${\gamma}$-subclass proteobacteria dominated in runs with domestic wastewater. However, the bacterial community structure changed significantly over six weeks; Cytophaga-Flavobacterium (CF)­group bacteria dominated in most runs fed with the small town's wastewater regardless of their source, while CF-group decreased strongly in run fed with domestic sewage from another city (Madison). It was also microscopically confirmed that most of those clogging materials was toilet tissue, which in turn may lead to vigorous growth of cellulose-degrading CF-group bacteria. This dominant presence of CF-group bacteria in the small town's sewer indicates that the main constituent of biofilm, toilet tissue (cellulose) in sewage, might have induced the unique pattern of their microbial community structure. Therefore, it suggests that molecular technique is useful for monitoring the clogging problems in sewer lines.

• Korean Journal of Plant Resources
• /
• v.32 no.3
• /
• pp.244-253
• /
• 2019

In crop breeding program, information about genetic dissimilarity on breeding resources is very important to corroborate genealogical relationships and to predict the most heterozygotic hybrid combinations and inbred breeding. This study aimed to evaluate the genetic variation in Kenyan sunflower breeding lines based on simple sequence repeat (SSR). A total of 83 alleles were detected at 32 SSR loci. The allele number per locus ranged from 2 to 7 with an average of 2.7 alleles per locus detected from the 24 sunflower accessions and the average value of polymorphic information contents (PIC) were 0.384. A cluster analysis based on the genetic similarity coefficients was conducted and the 24 sunflower breeding resources were classified into three groups. The principal coordinates (PCoA) revealed 34% and 13.38% respectively, and 47.38% of total variation. It was found that the genetic diversity within the Kenyan sunflower breeding resources was narrower than that in other sunflower germplasm resources, suggesting the importance and feasibility of introducing elite genotypes from different origins for selection of breeding lines with broader genetic base in Kenyan sunflower breeding program.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.81.1-81.1
• /
• 2017

L1251B is an excellent example of a small group of pre- and protostellar objects in low-mass star-forming region. Previous interferometer data with a high angular resolution resolved the outflows associated with L1251B into a few components. To understand the physical conditions of the protostellar outflows in L1251B, we mapped this region spectroscopically with Spitzer/IRS and obtained spectral line data from Herschel/PACS. Spitzer/IRS provides the S(0)-S(7) pure rotational lines of H2 as well as fine-structure emissions produced in shocks such as S, [Si II], and [Fe II] and it is a powerful tool for studying shocked interstellar gas. In addition, [O I] lines observed with Herschel/PACS are described well by J-type shock models expected in the outflows from protostars. We will present an analysis of the L1251B protostellar outflow in the H2 pure rotational lines and fine-structure emissions.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2456-2463
• /
• 2011

Conventional railways are less competitive than other land transportation means in term of speed, and thus users preference and transportation share for rail system are relatively lower than others. For example, most of the conventional lines except the Seoul~Busan corridor run at an average speed of 70 km/h or less, which imposes certain constraints on roles and functions as the trunk lines. In this regard, the speed of the conventional lines should be improved up to 200 km/h to gain competitiveness, promote balanced regional development and lead the era of low carbon green growth. As track system is one of the most important elements for the speed-up, it is critical to come up with optimum technical solutions. Improvement of ballast track structure with efficient track installation can provide structural stability for higher speed and ensure operational safety with lower maintenance efforts. Thus, this study focuses on consequences followed by the speed-up including increase of load imposed on the track and impacts on track components, and provide solutions for track maintenance by analyzing impact on the track structure by speed. Also, it compares ballast and concrete tracks under designing and construction and considers how to meet needs for passengers comfort and environmental requirements as a strategic approach.