• Journal of Environmental Health Sciences
• /
• v.32 no.4 s.91
• /
• pp.254-261
• /
• 2006

In activity areas of subway workers and passengers in Seoul metropolitan subway lines 1-4, mein concentrations of airborne bacteria were relatively higher in workers' bedroom and station precinct whereas concentrations of particulate matters, $PM_{10}$ and $PM_{2.5}$, were relatively higher in platform, inside train and driver's seat as compared with other activity areas. This result indicates that little correlation between airborne bacteria and particulate matters was found, which assumed that most airborne particulate matters distributed in subway consisted of mainly inorganic dust like a metal particles. Mean concentrations of $PM_{10}$ and $PM_{2.5}$ in station precinct and platform exceeded the threshold limit value ($PM_{10}:150{\mu}g/m^3,\;PM_{2.5}:65{\mu}g/m^3$) but those in station office and ticket office were below it. The genera identified in all the activity areas of subway over 5% detection rate were Staphylococcus, Micrococcus, Bacillus and Corynebacterium, of which Staphylococcus and Micrococcus covered over 50% of total airborne bacteria and were considered as predominant genera distributed in subway.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.4
• /
• pp.418-428
• /
• 2002

In this paper, we propose a motion-adaptive de-interlacing method using motion compensated interpolation. In a conventional motion compensated method, a simple pre-filter such as line averaging is applied to interpolate missing lines before the motion estimation. However, this method causes interpolation error because of inaccurate motion estimation and compensation. In the proposed method, EBMF(Edge Based Median Filter) as a pre-filter is applied, and new matching method, which uses two same-parity fields and opposite-parity field as references, is proposed. For further improvement, motion correction filter is proposed to reduce the interpolation error caused by incorrect motion. Simulation results show that the proposed method provides better performance than existing methods.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.83.2-83.2
• /
• 2012

We have carried out simultaneous 22GHz $H_2O$ and 44GHz Class I $CH_3OH$ maser survey of 112 ultra-compact HII regions (UCHIIs) twice in 2010 and 2011. We detected $H_2O$ maser and $CH_3OH$ maser emission from 76(68%) and 49(44%) UCHIIs, respectively. Among them 15 $H_2O$ masers and 32 $CH_3OH$ masers are new detections. These high detection rates suggest that the occurrence periods of both masers are significantly overlapped with the UCHII phase. $CH_3OH$ masers always have small (<10 km s-1) relative velocities with respect to the natal molecular cores, while $H_2O$ masers often show larger velocities. We find 20 UCHIIs with $H_2O$ maser lines at relative velocities >30 km s-1. The formation and disappearance of $H_2O$ masers is frequent over one-year time interval. In contrast, $CH_3OH$ masers usually do not show substantial variation in intensity, velocity, or shape. The isotropic luminosities of both masers well correlate with the bolometric luminosities of the central stars when data points of lowand intermediate-mass protostars are added: $L_{H_2O}=5.89{\times}10^{-9}{(L_{bol})^{0.69}}$ and $L_{CH_3OH}=4.27{\times}10^{-9}{(L_{bol})^{0.62}}$. They also tend to increase with the 2cm radio continuum luminosity of UCHIIs and the 850 um continuum luminosity of the associated molecular cores. We discuss some individual sources.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.87-94
• /
• 2005

3D positional information of lane can be automatically calculated tv combining GPS data, IMU data if coordinates of lane centers are given. The Road Safety Survey and Analysis Vehicle(RoSSAV) is currently under development to analyze three dimensional safety and stability of roads. RoSSAV has GPS and IMU sensors to get positional information of the vehicle and two road-facing CCD cameras for extraction of lane coordinates. In this paper, we develop technology that automatically detects centers of lanes from the road-facing cameras of RoSSAV. The proposed algorithm defines line-support regions by grouping pixels with similar edge orientation and magnitude together and extracts a line from each line support region by planar fitting. Then if extracted lines and the region in-between satisfy the criteria of brightness and width, we decide this region as lane. The proposed algorithm was more precise and stable than the previously proposed algorithm based on brightness threshold method. Experiments with real road scenes confirmed that lane was effectively extracted by the proposed algorithm.

• Journal of IKEEE
• /
• v.10 no.1 s.18
• /
• pp.40-48
• /
• 2006

This paper presents a new rooftop surface estimation method from 3D line segments. 3D rooftop surface estimation is based on the hierarchical grouping and initiated by 3D line merging for the disconnected 3D line segments. Merged 3D lines are applied to the detection of rooftop by surface estimating technique. To estimate surfaces we detect L-corner and T-corner points, and find fixed reliable junction points. The hypothesis of the possible rooftop surfaces are estimated as polygonal surfaces by these fixed junction points and building's rooftop models are generated by testing the possible surfaces in terms of assumptions of building surface properties. We carried out experiments by synthetic images on Avenches data set and the experimental results showed that we could reliably build 3D model with 3D surfaces, errors of which came up with 0.4 - 1.3 meter, 2.5 times more accurate than the elevation date from the conventional area-based stereo.

• 한국환경농학회:학술대회논문집
• /
• 2009.07a
• /
• pp.119-126
• /
• 2009

In recent years, research at the Environmental Microbial and Food Safety Laboratory (EMFSL), Agricultural Research Service (ARS) has focused on the development of novel image-based sensing technologies to address agro-food safety concerns, and transformation of these novel technologies into practical instrumentation for industrial implementations. The line-scan-based hyperspectral imaging techniques have often served as a research tool to develop rapid multispectral methods based on only a few spectral bands for rapid online applications. We developed a newer line-scan hyperspectral imaging platform for high-speed inspection on high-throughput processing lines, capable of simultaneous multiple inspection algorithms for different agro-food safety problems such as poultry carcass inspection for wholesomeness and apple inspection for fecal contamination and defect detection. In addition, portable imaging devices were developed for in situ identification of contamination sites and for use by agrofood producer and processor operations for cleaning and sanitation inspection of food processing surfaces. The aim of this presentation is to illustrate recent advances in the above agro.food safety sensing technologies.

• The Plant Pathology Journal
• /
• v.19 no.5
• /
• pp.260-265
• /
• 2003

Gummy stem blight caused by Didymella bryoniae occurs exclusively in cucurbits. This fungus has been known not to produce its pycnidium in vitro unless irradiated. In this study, cultural conditions for the mass-production of pycnidiospore by Metal Halide (MH) lamp irradiation were maximized. The mycelia were cultured at $26^{\circ}C$ on PDA for 2 days under dark condition, and then the plate was illuminated with MH lamp continuously for 3-4 days at $26^{\circ}C$. Results show that a great number of pycnidia were simultaneously formed. The pycnidiospores produced were then used as immunogen. Fusions of myeloma cell (v-653) with splenocytes from immunized mice were carried out. Two hybridoma cell lines that recognized the immunogen D. bryoniae were obtained. One monoclonal antibody (MAb), Dbl, recognized the supernatant while another MAb, Db15, recognized the spore. Two clones were selected which were used to produce ascite fluid of the two MAb, Dbl and Db15, the immunotypes of which were identified as IgG1 and IgG2b, respectively. Titers of MAb Dbl and MAb Db15 were measured and the absorbance exceeded 0.5 even at a $10^{-5}$ dilution. The MAbs reacted positively with D. bryoniae but none reacted with other viral isolates, Cucumber mosaic virus and Cucumber green mottle mosaic virus. Sensitivity of MAb was precise enough to detect spore concentration as low as $10^{-3}$/well by indirect ELISA. Characterization of the MAbs Dbl, Db15 antigen by heat and protease treatments, which suggests that the epitope recognized by these two MAbs was glycoprotein.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.405-413
• /
• 2015

Acoustic target strength (TS) measurement and theoretical acoustic scattering models were applied to estimate the TS for assessing the fish biomass. TS measurement was made of ex situ sailfin sandfish Arctoscopus japonicus at 70 and 120 kHz, and then compared to backscatter model prediction. The live sandfish was tethered in seawater using monofilament lines. Measurements were made versus incidence angle, $-50^{\circ}$ to $50^{\circ}$ relative to dorsal aspect directions. Distorted wave Born approximation (DWBA) model was used to calculated TS pattern. The TS values of sandfish (body length: 16.2 cm) at 70 and 120 kHz were -66.94 dB and -64.45 dB, respectively, and were about 20 dB lower than TS of other fishes in Korea waters. These TS levels were distributed within the range of the theoretical TS. Ex situ measurement and theoretical TS may be applied to improve acoustical detection and biomass estimation of the sandfish, and is necessary to measure with various lengths.

• BMB Reports
• /
• v.38 no.4
• /
• pp.391-398
• /
• 2005

3-hydrogenwadaphnin (3-HK) is a new daphnane-type diterpene ester isolated from Dendrostellera lessertii with strong anti-tumoral activity in animal models and in cultures. Here, prolonged effects of this new agent on proliferation and viability of several different cancerous cell lines were evaluated. Using [$^3H$]thymidine incorporation, it was found that the drug inhibited cell proliferation and induced G1/S cell cycle arrest in leukemic cells 24 h after a single dose treatment. The cell viability of Jurkat cells was also decreased by almost 10%, 31% and 40% after a single dose treatment (7.5 nM) at 24, 48 and 72 h, respectively. The drug-treated cells were stained with acridine orange/ethidium bromide to document the chromatin condensation and DNA fragmentation. These observations were further confirmed by detection of DNA laddering pattern in the agarose gel electrophoresis of the extracted DNA from the treated cells. Treatment of K562 cells with the drug at 7.5, 15 and 30 nM caused apoptosis in 25%, 45% and 65% of the cells, respectively. Exogenous addition of $25-50\;{\mu}M$ guanosine and/or deoxyguanosine to the cell culture of the drug-treated cells restored DNA synthesis, released cell arrest at G1/S checkpoint and decreased the apoptotic cell death caused by the drug. These observations were not made using adenosine. However, the drug effects on K562 cells were potentiated by hypoxanthine. Based on these observations, perturbation of GTP metabolism is considered as one of the main reasons for apoptotic cell death by 3-HK.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2013

The accuracy of a real facial recognition system can be varied according to the accuracy of the eye detection algorithm when we design and implement a semi-automatic facial recognition algorithm depending on the eye position of a database. In this paper, a fully automatic facial recognition algorithm is proposed such that Gabor and LBP features are extracted from fiducial points of a face graph which was created by using fiducial points based on the eyes, nose, mouth and border lines of a face, fitted on the face image. In this algorithm, the recognition performance could be increased because a face graph can be fitted on a face image automatically and fiducial points based LPB features are implemented with the basic Gabor features. The simulation results show that the proposed algorithm can be used in real-time recognition for more than 1,000 faces and produce good recognition performance for each data set.