• 한국전자파학회논문지
• /
• 제16권5호
• /
• pp.501-510
• /
• 2005

본 논문에서는 마이크로스트립 패치 안테나의 패치 밑면에 부착된 'L'자형 plate에 의해 패치 밑면의 전류 경로 길이 증가 효과 및 perturbation효과를 이용하여 안테나의 소형화를 이루고자 하였다. 1.575 GHz대에 있어서, 먼저 대각선 급전 선형 편파의 경우, 14개의 'L'자형 Plate를 부착시켰을 시 패치의 크기가 $47mm{\times}47mm$로 높이 9mm 평면형 마이크로스트립 패치 안테나(패치 길이 83mm$\times$패치 폭 83mm)보다 $70.8\%$의 면적 축소 효과를 나타내었고, 이득은 1.19 dBd, E-면 HPBW는 $127^{\circ}$를 나타내었다. 또한 원형 편파의 경우, 13개의 'L'자형 plate를 부착시켰을 시 패치의 크기가 $53mm{\times}54mm$로, 평면형 보다 $54.6\%$ 면적 축소 효과를 나타내었고, 이득은 1.36 dBd, 1.575 GHz에서 축비는 1.37 dB, 축비 2 dB 이하 대역폭은 14 MHz를 나타내었다. 이로써 본 논문에서 제안된 패치 밑면에 'L'자형 plate를 부착시킨 마이크로스트립 안테나가 선형 편파 및 원형 편파 안테나의 소형화에 적합함을 확인하였다.

• 천문학회보
• /
• 제41권2호
• /
• pp.33.1-33.1
• /
• 2016

We report detection of short-term flux variability in multi-epoch observations and intraday variability in polarized emission at millimeter-wavelength from S5 0716+714 using Korean VLBI Network (KVN) radio telescopes. Over the whole observation epochs, the source shows significant inter-month variations at K- and Q-band with modulation indices of 19% at K-band and 36% at Q-band. In each epoch, the source shows monotonic flux increase in Epoch 1 and 3, and monotonic flux decrease in Epoch 2 and 4. We found an inverted spectrum with mean spectral indices of -0.57 in Epoch 1 and -0.15 in Epoch. On the contrary, we found relatively steep indices of 0.24 and 0.17 in Epoch 2 and Epoch 4, respectively. In the study of intraday variability of polarization, we found significant variations in the degree of linear polarization at 86 GHz, and in polarization angle at 43 and 86 GHz during ~10 h. The spectrum of the source is quite flat with spectral indices of -0.07 to 0.07 at 22-43 GHz and -0.23 to 0.04 at 43-86 GHz. The measured degree of the linear polarization ranges from 2.3% to 3.3 % at 22 GHz, from 0.9% to 2.2 % at 43 GHz and from 0.4 % to 4.0 % at 86 GHz, yielding prominent variations at 86 GHz over 4-5 h. The linear polarization angle is in the range of 4 to $12^{\circ}$ at 22 GHz, -39 to $81^{\circ}$ at 43 GHz, and 66 to 119 at 86 GHz with a maximum rotation of $110^{\circ}$ at 43 GHz over ~4 h. We estimated the Faraday rotation measures (RM) ranging from -9200 to 6300 rad m-2 between 22 and 43 GHz, and from -71000 to 7300 rad m-2 between 43 and 86 GHz, respectively. The frequency dependency of RM was investigated, yielding a mean power-law index, a, of 2.0. This implies that the polarized emission from S5 0716+714 at 22-86 GHz moves through a Faraday screen in or near the jet of the source.

• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1015-1022
• /
• 2023

본 논문에서는 4.7 GHz 특화망 대역에 적용할 수 있는 개구결합 급전을 갖는 이중 선형편파 안테나를 제안하였다. 제안된 안테나는 격리도 향상을 위해 일반적인 개구 결합급전을 갖고 상층과 하층에 각각 급전점을 갖도록 설계하였다. 각각의 기판의 크기는 34.0 mm×34.0 mm (W×L)이며 두께(h) 1.0 mm, 그리고 비유전율이 4.4인 FR-4 기판을 사용하였다. 또한 상층의 윗면에 12.7 mm×14.6 mm (W2×L3)의 패치를, 하층의 아랫면에 24.0mm×1.6 mm의 급전선로를, 접지면에 1.0 mm×7.7 mm(S×T)의 크기를 갖는 슬롯을 설계하여 패치로 급전되도록 하였다. 제작 및 측정 결과로부터, -10 dB 반사손실을 기준으로 배열 안테나의 경우, 입력포트 1에서 300.0 MHz (4.52~4.82 GHz), 입력포트 2에서 170.0 MHz (4.65~4.82 GHz)의 대역폭을 얻었으며 전달계수 S21은 -30 dB 이하의 값을 얻었다. 또한 각 급전포트에서의 편파분리도를 얻었다.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2268-2272
• /
• 2010

This letter presents that a rectenna can utilize more stable wireless power by using a new design dual band/dual polarization microstrip patch antenna and 2 stage voltage multiplier at 2.4 GHz band and 3.1 GHz band. The proposed antenna is a new microstrip patch antenna design to make impedance matching possible by using slotted capacitive coupling between the patch and $50\Omega$ feed line on a ground plane. Its advantage is that the size of the rectenna can be reduced by using $50\Omega$ feed line on the ground plane, which can be used efficiently. The dual band/dual polarization microstrip patch antenna shows circular polarization at 2.4 GHz band and linear polarization at 3.1 GHz band. Under -10 dB return loss, The dual band/dual polarization microstrip patch antenna obtains 340 MHz bandwidth as 2.23~2.57 GHz and 375 MHz bandwidth as 2.95~3.325 GHz. Also, 2 Stage Voltage multiplier is possible to operate at 2.4 GHz band and 3.1 GHz band. The designed retenna can usually obtain wireless power at both 3.1 GHz band, and 2.4 GHz band applications such as Wi-Fi, Bluetooth, Wireless LAN, etc. So more stable wireless power can be utilized at the same time.

• Corrosion Science and Technology
• /
• 제7권6호
• /
• pp.319-323
• /
• 2008

The polarization resistance of mild steel in 0.5M hydrochloric acid has been evaluated by using impedance (Z) and linear polarization (LPR) techniques and compared to the noise resistance obtained from electrochemical noise data. The degree of localization of this general corrosion has also been discussed by evaluating localization index and power spectral density. Polarization resistance obtained by LPR technique ($28\Omega$) was higher than that obtained by impedance technique ($15\Omega$). Noise resistance ($11\Omega$) was much lower than polarization resistance measured by both of above techniques. Higher polarization resistance obtained by LPR technique is generally caused by passivation effect in the presence of scales or deposits which can introduce an increased resistance as can low conductivity electrolytes. The reason why noise resistance is lower than polarization resistance is the effect of background noise detected by using three platinum electrodes cell in 0.5M hydrochloric acid. Slope($-\beta$) of power spectral density (PSD) obtained from analysis of noise data ($-\beta$ = 3.3) was much higher than 2 which indicates mild steel corroded uniformly. Localization index (LI) calculated from statistical analysis (LI=0.08) is much lower than 1 which indicates that mild steel did not corroded locally. However, LI value is still higher than $1x10^{-3}$ and this indicates that mild steel corroded locally in microscopic point of view.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.331-337
• /
• 2015

A novel fully-printed microstrip antenna with negative first resonance and dual polarization is proposed. The radiator is printed on the 1-layer substrate instead of multilayers. The -1st resonance results from a composite right- and left-handed(CRLH) structure that has a circumferentially interlocked gap capacitively coupling a patch with a shorted-ring. This compact antenna is provided with a dual-polarization capability by creating two orthogonal linear polarizations in one body with coaxial feeds. The design is carried out by doing full-wave EM field simulation which is compared with the measurement of the fabricated antenna prototype. The measured results give the gain of 5 dBi and the efficiency of 78% at the -1st resonance mode as the center frequency of a downlink channel of the bandwidth over 20 MHz with 29 dB polarization isolation for mobile communication.

• Journal of Information Display
• /
• 제8권1호
• /
• pp.18-21
• /
• 2007

We developed a new configuration of polarized light out-coupling lightguide plate (LGP) in the LCD backlight. By collimating the light into the LGP, one linear polarization component experienced total internal reflection at the planar interface of LGP and anisotropic layer, whereas the orthogonal polarization was out-coupled along the normal direction through a birefringent layer and subsequent isotropic microstructures.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1995-1997
• /
• 2007

In this paper we propose a wavelength-switchable fiber ring laser that employs a polarization-dependent fiber band stop filter. The fiber filter was fabricated by inscribing a long-period fiber grating on a high birefringent fiber. Dual-wavelength switching operation was accomplished by controlling the rotatable linear polarizer which rotated the polarization plane of the light circulating through the fiber laser cavity. The amplitude variation of both laser lines was measured to be less than 0.5 dB and the signal-to-amplified spontaneous emission ratio was more than 55 dB.

• Current Optics and Photonics
• /
• 제5권1호
• /
• pp.45-51
• /
• 2021

The effect of the out-of-plane retardation (Rth) of a substrate film on the viewing-angle dependence of transmittance (TR) in a display device was investigated. When the polarization state of input light deviates from the transmission axis of the polarizer, Rth of the substrate film induces inhomogeneous viewing-angle dependence of TR. The inhomogeneity of TR gets worse for greater values of of Rth. The inhomogeneous TR profile can be eliminated by inserting compensation films, which convert the input polarization state to the linear polarization state parallel to the transmission axis of the polarizer.

• 한국광학회지
• /
• 제32권1호
• /
• pp.29-33
• /
• 2021

본 논문에서는 주기적 분극된 비선형 결정(periodically poled potassium titanyl phosphate; PPKTP)에서 자발매개하향변환(spontaneous parametric down conversion; SPDC)과정으로 생성된 예고된 단일 광자 광원을 이용하여 레겟-가르그 부등식(Leggett-Garg inequality; LGI)의 위배를 실험적으로 모사하였다. 생성된 광자의 편광 방향에 따라서 편광된 광자 수를 측정하여 n-측정수에 따른 레겟-가르그 부등식을 모사하였다. 단일 광자의 편광 기반 LGI에 대한 실험 결과는 이론적인 계산 결과와 일치하는 것을 확인하였다.