The purpose of this study was to investigate true hinge axis location with different times (8:00-9:00 A.M.,2:00-3:00 P.M.) and with experienced and inexperienced groups. 25 subjects, 23-27 years of age , with functionally acceptable occlusion, and no clinical signs of temporomandibular joint dysfunction were participated in this study. In this study arbitrary hinge axis point was located 13 mm anterior to the posterior margin of the tragus on a line from the center of the tragus to the outer canthus of the eye and then the true hinge axis point was located with T.M.J. hinge axis locator. The discrepancies of distance and the direction between true hinge axis point and arbitrary hinge axis point were studied according to times and two groups. The results obtained were as follows : 1. The mean distance from arbitrary hinge axis point to the true hinge axis point on the right and left sides was as follows : Experienced group: linear distance: $1.228{\pm}3.145mm$, vertical distance: $-1.128{\pm}2.515mm$, horizontal distance: $-0.484{\pm}1.806mm$. Inexperience group: linear distance: $1.628{\pm}3.158mm$, vertical distance: $-1.169{\pm}2.090mm$, horizontal distance: $-1.133{\pm}2.367mm$. Horizontal distance between experienced and inexperienced groups was significant statistically. (P<0.1) 2. True hinge axis points located within 5 mm of arbitrary hinge axis point were 86.7% in the experienced group and 84% in the inexperienced group. 3. For experienced operator A with time, the mean distance from arbitrary hinge axis point to true hinge axis point was as follows: Horizontal distance: AM: $-0.613{\pm}1.966mm$, PM: $-0.860{\pm}2.156mm$. Vertical distance: AM: $-0.886{\pm}2.518mm$, PM : $-1.226{\pm}2.660mm$. True hinge axis points had tendency to be located posterior-inferiorly to tragus-canthus line in the afternoon than in the morning, but there was not significant statistically. (P>0.1)
선박의 주묘 위험성을 평가할 수 있는 프로그램이 개발되어 있지만 선박의 제원에 해당되는 다양한 입력요소들을 직접 찾아서 입력해야 하므로 VTS 관제사가 정박지에 정박 중인 선박들로부터 이러한 입력요소들을 모두 확인하여 프로그램을 활용하는 것은 현실적으로 어려운 상황이다. 이에 본 연구에서는 VTS 관제사 입장에서 선박으로부터 쉽게 획득할 수 있는 총톤수(GT)를 독립변수로 설정하고 프로그램 입력요소들을 종속변수로 하여 선형 및 비선형 회귀분석을 실시하였다. 다항식 모델(선형)과 멱급수 모델(비선형)의 적합도를 비교한 결과, 컨테이너선과 벌크선의 경우에는 모든 입력요소에서 멱수급 모델이 적합한 것으로 평가되었다. 하지만 탱커선의 경우에는 수선간장, 선폭, 흘수는 멱수급 모델이 적합하고, 정면풍압면적, 앵커의 무게, 의장수, 묘쇄공으로부터 선저까지의 높이는 다항식 모델이 더 적합한 것으로 평가되었다. 또한 탱커선의 정면풍압면적 요소를 제외한 다른 나머지 종속변수들은 모두 결정계수가 0.7 이상으로 높은 적합도를 보였다. 따라서 주묘 위험성 평가 프로그램의 입력요소 중 외력 요소, 해저 저질, 수심 및 앵커 체인의 신출량을 제외한 나머지 입력요소들은 선박의 총톤수만 입력하면 회귀분석 모델식에 의해 자동으로 입력됨으로써 주묘 위험성 평가가 가능할 것으로 판단된다.
조절성 교합기에 모형을 부착하기 위하여 안궁이전이 필요하다. 아날로그 안궁이전에서는 장비의 정확도와 작업자의 숙련도가 모형 부착 결과에 영향을 미칠 가능성이 있다. 더불어 편차가 큰 방법으로 부착된 작업 모형에서는 정확한 치과 보철물의 제작이 어려우므로, 아날로그 안궁이전으로 부착된 작업 모형의 위치 편차를 파악하는 것이 중요하다. 본 증례에서는 아날로그 안궁이전으로 부착된 상악 모형의 위치와 cone beam computed tomography 데이터를 기반으로 위치된 상악 모형의 위치를 거리 편차와 교합 평면의 각도 편차를 평가하였다. 이를 토대로 아날로그 안궁이전으로 부착된 상악 모형의 편차를 보고하였다. 아날로그 안궁이전 방법은 3 - 16 mm의 선형 편차와 5 - 7도의 교합평면 각도 편차를 가지는 상악 모형의 부착 결과를 나타내었다. 아날로그 안궁이전은 환자별로 위치 편차가 다를 수 있음을 확인했으며, 치과 보철물 제작에서의 부정확성을 초래할 가능성이 있다. 이러한 결과는 임상에서 아날로그 안궁이전 방법이 상악 모형을 부착하는 과정에서 큰 편차가 있을 수 있음을 나타내었기에 이를 보고하는 바이다.
The present study was undertaken to evaluate the accuracy of ultrasonography in early pregnancy diagnosis in goats. Ultrasonographic scanning with real time B-mode ultrasound machine having 5 MHz linear array transducer was performed on gravid uterus (n=24) obtained from slaughterhouse (Group I). Crown rump length (CRL) measured by ultrasound was found significantly different (p<0.05) with actual CRL measured after dissection in early pregnancy. However, age predicted by ultrasound through the measurement of CRL was found highly correlated (r=0.92) with age measured after dissection through CRL and the weight of fetus. Ages predicted by ultrasound through the measurement of trunk diameter (TD) and uterine diameter (UD) and ages measured after dissection were found highly and equally correlated (r=0.98) and did not differ significantly. Data from six does synchronized (Group II) with PGF2$\alpha$ (Estrumate) at 11 days apart were collected through ultrasound from 17 to 42 days post breding. The correlation between CRL and gestational age was high (r=0.97) in day 30 to 42 post breeding. A high coefficient of correlation (r=0.98) was also observed between predicated age by ultrasound and actual age calculated after kidding. The correlation between CRL and gestational age by the formula Y=(a+bX) i.e. Y=24.42+0.39 X where Y=gestational age and X=CRL, was recorded very high (r=0.99). Accuracy of ultrasonography was lowest on day 17 to 19 (66%) and reached 100% on day 34. Data from 30 does (group III) randomly subjected to only one time ultrasounds scanning to assess the accuracy of pregnancy diagnosis were also obtained. Ages predicted by TD and UD measurements were observed to be non-significantly different with actual age obtained after kidding and correlation between ages predicted by TD and UD measurement with actual age after kidding was found equally and highly correlated (r=0.98). The operator's accuracy in the whole experiment including all three groups was found to be 92%. The sensitivity was 93% and specificity was 86%. From the present study, it was observed that CRL was the most reliable parameter to find out gestational age in early pregnancy and the new formula derived was found very accurate to find out gestational age. TD and UD were also found to be equally reliable parameter to find out gestational age in mid and late stage of pregnancy through ultrasonography. It was concluded that ultrasonography by real time B mode with 5 MHz transrectal transducer was found to be reliable, safe and accurate and practicable means in diagnosing early pregnancy diagnosis as early as 25 days post breeding.
Objectives: This study aimed to assess exposure to black carbon(BC) among forklift operators and to identify environmental and occupational factors influencing their BC exposure. Methods: We studied a total of 23 forklift operators from six workplaces manufacturing paper boxes. A daily BC exposure assessment was conducted during working hours from January to April 2017. A micro-aethalometer was used to monitor daily BC exposure, and information on work activities was also obtained through a time-activity diary(TAD) and interviews. BC exposure records were classified into four categories influencing BC exposure level: working environment, workplace, forklift operation, and job characteristics. Analysis of variance(ANOVA) was used to compare average BC exposure levels among the four categories and the relationships between potential factors and BC exposure were analyzed using a multiple linear regression model. Results: The operators' daily exposure was $12.9{\mu}g/m^3$(N=9,148, $GM=7.5{\mu}g/m^3$) with a range: $0.001-811.4{\mu}g/m^3$. The operators were exposed to significantly higher levels when they operate a forklift in a room ${\leq}20,000m^3$($AM=12.3{\mu}g/m^3$), in indoor workplaces($AM=16.3{\mu}g/m^3$), when they operate a forklift manufactured before 2006 ($AM=13.2{\mu}g/m^3$), a forklift with a loading limit of four-tons($AM=27.1{\mu}g/m^3$), with a roll and bale type clamp($AM=17.1{\mu}g/m^3$), and with no particulate filter($AM=15.7{\mu}g/m^3$). Conclusions: Occupational factors including temperature, smoking, season, daytime, room volume($m^3$), location of operating, and manufacturing era and model of forklift influenced the BC exposure of forklift operators. The results of this study can be used to minimize the BC exposure of forklift operators.
국내외 미디어 시장에서 OTT의 파급력이 막대해짐에 따라 OTT에 대한 규제 논의도 활발해지고 있다. 우리나라에서는 특히 OTT와 방송의 유사성에 입각한 공정경쟁 환경 조성의 필요성, 사회문화적 영향력의 규율 필요성이 제기되고 있으며, 그 근거로서 해외의 규제 도입 및 논의 사례가 활용되어 왔다. 이에 본 논문에서는 OTT의 다양한 유형을 바탕으로 해외 시장 동향을 분석하고, 해외 정책규제 사례의 국내 적용 타당성을 고찰했다. 사업자 성격, 사업모형, 콘텐츠 형식, 전달 방식 등을 복합적으로 고려해 6개 OTT 유형(집적, 중개, 중개-집적, 멀티스크린, 아울렛, 아울렛-실시간)을 도출하고, 이를 중심으로 해외 서비스들의 동향을 살펴보았다. 그 결과 OTT 서비스의 형태는 현재도 끊임없이 진화하고 있으며, 콘텐츠 차별화를 중심으로 한 경쟁이 격화되고 있었다. 동태적 혁신이 계속되고 있는 OTT 시장에 섣부른 경쟁규제를 도입하는 것은 경계할 필요가 있다. 또한 OTT 규제 논의의 배경 논거로 자주 활용되는 미국, 유럽연합, 영국 및 일본의 사례를 확인한 결과, OTT에 방송으로서 규제를 적용하는 사례로는 적절하지 않은 것으로 나타났다. 오히려 해외 사례는 자국 내 미디어 산업의 경쟁을 활성화하고 콘텐츠 생태계의 건전성을 높이는 데 초점이 있었다. 따라서 OTT 규제 논의는 규제의 강화가 아니라 기존 방송에 대한 규제를 완화하는 방향으로, 또한 국내 사업자의 규제 포섭이 아니라 글로벌 사업자에 대한 실효적 관할권 확보를 우선시하는 방향으로 진행되어야 할 것이다.
Recently the development of rotary instrument makes it possible that in root canal treatment operator saves much more time, maintans original curved canal shape and easily prepares continuous tapered root canal. The purpose of this experiment was to examine the smoothness of the internal surface of prepared root canal and the effectiveness of debridement in prepared root canal by SEM for the comparison of hand and Ni-Ti rotary instrument. 25 extracted human teeth were access opened and # 10 K-type file was introduced into canal until it was appeared at the apical foramen. The working length was established by subtracting 0.5mm from this measurement. Group 1. The root canal preparation was done to # 30 with working length and then step-back until # 45 with K-Flexofile (Maillefer, Swiss). Group 2. Root canal preparation was done by Naviflex Ni-Ti file (Brasseler, USA) as the same technique with group 1. Group 3. Canal was prepared by Profile .04 (Maillefer, Swiss) taper until #30. Group 4. With use of Quantec (Tycom, USA) root canal was prepared from file number 1 to 8. In group 1 and 2, the root canal irrigant was NaOCl and the other groups, NaOCl and RC-prep (Premine Dental Products, USA) was used. The prepared teeth were notched with high-speed bur as bucco-lingual direction and fractured with chisel and mallet, then examined with SEM. Group 1 showed smooth internal surface. There were scratches mainly to the axial direction. Group 2 showed similar characteristics to those in group 1. Group 3 showed more smoother and linear cutting surface with bised scratches. Group 4 has the almost same characteristics group 3 and there was no difference in the file design. Ni-Ti rotary root canal instrument prepare the dentinal wall more smoother than hand instrument. The effectiveness of debridement was not fully affected by file design. The isthmus area and accessory canals of the root canal system were not prepared in any group. According to the result, hand and rotary type instrumentation techniques were effective in removal of major amount of tissue from root canal but it was not complete. In the direction of cutting movement there was difference between them.
영광 3호기는 국내에서 노심보호계통으로_ 노심보호연산기 (CPC)를, 노심감시계통으로 노심운전제한 감시계통 (COLSS)을 사용하는 최초의 원자력발전소이다. CPC는 핵비등 이탈율 및 국부 설출력밀도를 실시간으로 계산하여 노심 조건이 설계 제한치를 초과하면 원자로를 정지시키도록 설계되었다. COLSS는 운전원에게 핵비등 이탈율/선형열출력 여유도, 사분출력 경사비, 및 축방향 출력편차에 대한 기술지침서의 운전제한치을 적용하는데 도움을 제공하고 운전제한치를 초과하는 경우, 경보를 제공하도록 설계되었다. 영광3호기 초기 시운전시험 동안, 다양한 노심 조건에서 CPC/COLSS의 성능을 검증하고 최적의 교정 상수를 얻기 위하여 광범위한 CPC /COLSS 관련시험이 수행되었다. 대부분의 시험결과는 시험허용 범위를 만족하였고, 시험허용 범위를 불만족한 경우에는 시험결과를 분석, 평가하여 문제점을 해결하였다. 각 시험결과를 분석, 평가한 결과 영광 3호기에서 CPC/COLSS가 설계된 데로 성공적으로 설치, 운전되는 것을 확인할 수 있었다.
여러가지 교정장치 중에서 고정성 장치는 개개치아의 이동에 있어 가장 효과적으로 사용되는 장치이므로 그 작용기전과 역학적 관계를 이해하는 것이 중요하다. 고정성 장치의 탄선형태는 크게 continuous arch, segmented arch, sectional arch로 나누어 볼수있는데, segmented arch나 sectional arch는 힘의 작용점이 단순하고 interbracket distance도 길어 술자 임의대로 force system 조절이 가능한 반면 continuous arch에 서는 bracket geometry가 다양하고, interbracket distance가 좁아 force system의 조절이나 그 역학적 분석이 어려운게 사실이다. 저자는 공학에서의 3 dimensional elastic beam이 continuous arch의 형태와 유사한 점에 착안하여 continuous arch 의 force system을 분석하고자 하였으며, 이를 위해 다양한 형상을 갖는 3개의 bracket geometry를 표본형상으로 설정하고 기울기, 변위 및 interbracket distance에 따른 힘과 moment의 변화양상을 분석하고, 저자가 임의로 제작한 불규칙한 치아배열을 갖는 3차원 모형을 일례로하여 0.016 NiTi archwire를 bracket내에 삽입했을 때 발생되는 초기 힘과 moment를 분석 비교해본 결과 다음과 같은 결론을 얻었다. 1. Bracket의 변위 또는 기울기에 따라 나타나는 힘의 양상이 선형 대칭적인 비례관계를 보였다. 2. Interbracket distance에 따라 나타나는 힘의 양상은 비선형 대칭적인 반비례관계를 보였다. 3. 3차원 모형에서 bracket 형상이 비교적 단순한 부위에서는 표본형상과 비교분석이 가능했지만 인접치의 형상이 복잡한 부위에서는 표본형상의 예측량보다 힘이 크게 발생 되었다.나타나지 않았다. 하악의 arch length discrepancy는 하악 절치의 MD/FL index와, 상악의 arch length discrepancy는 측절치의 MD/FL index에서 상관관계를 나타내었다. 4. 정상군과 밀집군의 각 계측항목의 t-검정 결과 하악의 arch length discrepancy, overbite에서만 유의차를 나타내었다. 검사에서 Plaque Index(p<0.01)와 Gingival Index(p<0.001)가 상당히 낮은것으로 나타났다. 겔형 불화주석군에서 한 증례는 미미한 치관착색을, 두 증례는 보통정도의 치관착색을 보였다. 치아탈회 연구에서는 겔형 불화주석군과 불화나트륨 양치액군이 치료후 치아탈회값에서 치료전 치아탈회값을 뺀 치아탈회값이 대조군에 비해 구강전체및 제1대구치에서 현저하게 낮은 값(p<0.05)을 보였다. 비록 겔형 불화주석군이 불화나트륨 양치액군보다 일관되게 낮은 치아탈회값을 보였을지라도 통계적으로 그 차이는 단지 유의성을 보이는 정도였다.는 골기질의 주성분인 type I 교원질의 합성을 선택적으로 억제하는 기능과 alkaline phosphatase의 활성을 크게 증가시키지 못한 점 등으로 미루어 볼 때, 골개조를 억제하는 방향으로 작용한다고 볼 수 있으며, 교정치료 과정중 골개조를 억제하는 부위에서 사용을 시도해 볼 수 있겠다.>신뢰구간은 상악에서 정상교합군은 $79.5-81.0\%$, 비발치군은 $81.6-84.9\%$, 발치군은 $70.1-72.2\%$로 나타났으며, 하악에서 정상교합군은 $79.8-82.2\%$, 비발치군은 $82.1-85.5\%$, 발치군은 $73.1-75.1\%$로 나타났다. 7. 최대치아근원심폭경합, 기저악궁폭경, 기저악궁장경, 최대치아근원심폭경 합에 대한
연인과의 성공적인 관계형성은 인생의 만족감을 결정짓는 핵심적인 요소 중 하나이다. 기존에 심리학 분야에서는 성공적인 연인관계에 영향을 미치는 요인들에 대한 다양한 연구가 수행되어 왔으나, 주로 통계적인 분석기법에 기반하고 있기 때문에 복잡한 비선형의 관계를 분석하고, 특징을 추출하는 데에는 한계가 있었다. 이에, 본 연구는, 기존의 통계적인 분석 기법과 더불어, 데이터마이닝의 의사결정나무 분석기법을 활용하여 사랑의 형태에 따른 연인관계의 몰입(commitment) 수준과 관계지속 여부를 분석하였다. 특히, 기존 연구에서 도출된 주요 변인들 이외에 사랑의 여섯 가지 형태인 에로스(eros), 루두스(ludus), 스트로게(storge), 매니아(mania), 프래그마(pragma) 그리고 아가페(agape)를 추가적으로 고려하여, 이들이 연인관계에서 서로에 대한 몰입수준 및 연인관계 지속여부에 어떠한 영향을 미치는지 분석하고, 예측하는 모형을 수립하였다. 본 연구에는 실제 남녀커플 105쌍, 총 210명에 대한 데이터가 활용되었다. 본 연구결과 연인관계 몰입수준 및 관계 지속여부의 영향요인으로, 기존에 심리학 분야에서 제시된 변수들 이외에, 에로스, 아가페, 프래그마 등이 유의한 영향을 미친다는 것을 확인하였다. 특히, 남성은 아가페적 사랑의 형태가 몰입에 중요한 영향을 미치는 반면, 여성은 에로스적 사랑의 형태가 더욱 중요한 영향을 미치는 것으로 나타났다. 또한, 연인관계 지속여부에는 남성의 나르시시즘, 만족, 투자 및 매니아적 성향이 영향을 주고 있는 것으로 나타난 반면, 여성의 경우, 여성이 남성을 매니아적으로 사랑하는 정도만이 영향을 주고 있어, 남성이 관계의 지속 또는 결별에 더욱 결정적인 영향을 미치고 있는 것을 알 수 있었다. 이러한 연구는 데이터마이닝의 적용분야를 심리학 영역으로 확장한 융합연구로, 연인관계에 대한 새로운 분석을 시도하였다는 점에서 의의가 있으며, 조화로운 연인관계를 형성하는데 실질적인 시사점을 제공할 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.