• 한국항해항만학회지
• /
• 제31권1호
• /
• pp.55-64
• /
• 2007

일반적으로 서보 제어 시스템에서 비선형 동적 특성을 갖는 마찰력은 제어기 성능에 악영향을 미친다. 특히, 선형으로 고려된 시스템에 제어기 이득을 잘 설계한다 하더라도 마찰 현상에 포함된 동적으로 변화하는 dead zone에 의한 정상상태 오차 및 리미트 사이클(limit Cycle) 등을 야기한다. 따라서, 본 논문에서는 비선형 동적 마찰 성분을 효과적으로 보상하고 적응적으로 제어함으로써 차세대 항만 자동화 이송시스템으로 주목받고 있는 LMTT(linear motor-based transfer technology) 시스템의 위치 정밀도를 향상시키는 것을 목적으로 하고 있다. 본 제어대상은 셔틀카(shuttle car)와 컨테이너들의 다양한 중량과, 이로 인해 발생하는 동적 마찰 특성 파라미터들의 변화가 발생하므로 마찰력 내부 파라미터들의 추정이 요구된다. 제안하는 방법은 적응 backstepping 제어 기법으로 시스템이 안정하게 제어될 수 있는 조건으로 내부 파라미터 추정기를 설계하여 비선형 동적 마찰력을 보상하도록 하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.296-303
• /
• 2004

In this study, equivalent linear damping and stiffness of a single-degree-of-freedom (SDOF) structure with a rotational friction damper are estimated using the result of experiments and compared with those obtained from non-linear time history analyses. First, the transfer function of the test model is constructed and then the equivalent stiffness and damping are calculated, using the half-power bandwidth (HPB) method. For comparative study, those properties are estimated based on stochastic theory in the time domain. Both equivalent linear systems identified from experiments and numerical analyses correspond well. Further, it is observed that there exists an optimal clamping force on the rotational friction damper from estimated equivalent damping.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.125-126
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.279-280
• /
• 2009

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.18-25
• /
• 2007

Linear motor is easily affected by load disturbance, force ripple, friction, and parameter variations because there is no mechanical transmission to reduce the effects of model uncertainties and external disturbance. These nonlinear effects have been reduced for high-speed/high-accuracy position control either through the better motor design or via the better control algorithm that can compensate the nonlinear effects. In this paper, a nonlinear adaptive control algorithm is designed and applied for the position control of permanent magnet linear synchronous motor. In order to estimate and compensate the nonlinear effects such as friction and force ripple, the estimation and the nonlinear adaptive control laws are derived based on the virtual control input and a suitable Lyapunov function. The proposed controller is evaluated through the computer simulations. The control algorithm is also implemented to a DSP board and interfaced to the PMLSM for verifying the realtime control performance.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권7호
• /
• pp.428-436
• /
• 2005

In this paper, we introduce an adaptive control method to improve the position accuracy and reduce nonlinear friction effects for the linear motion servo system with the nonlinear friction. The considered system plant included not only the variation of the mass of mover but also the friction change by the normal force. We also designed an adaptive controller with the mass estimator and the compensator by observing the variation of normal force. The effectiveness and system performances for the proposed control method in this paper show to improve than other control methods through numerical simulations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.258-263
• /
• 2005

The nearest variety of the industrial world requires using the high precision and resolution positioning technology to do a semi-conductor, information field , and measurement field. It is especially important for the positioning technology that makes up a proper controller, is affected by the minimal heat and vibration, and can control a structurally generated non-linear friction factor to determine the efficiency of the system. The paper is to analyze the vibration characteristic according to the speed of linear motor and grasp the dynamic characteristic through the modal test and show the verification of the experimental result and design parameters by using FEM(Finite Element Method). Also, it shows the optimum standard analyzed the acceleration patterns of the moving part that lead to the vibration source in linear motor. It presents the analyzed dynamic of linear motor in compliance with a change of the non-linear factor.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1630-1638
• /
• 2001

Partial rotor rub occurs when an obstacle on the stator of a rotating machinery disturbs the free whirling motion of the rotor, which is more common than full annular rub among the cases of rubbing in rotating machinery. The intermittent contacts and friction during partial rotor rub makes the phenomenon complex. The several nonlinear phenomena of superharmonics, subharmonics, and jump phenomenon are demonstrated for the partial rub using an experimental apparatus in this study. The orbit patterns are also measured experimentally. In order to explain the phenomena of partial rotor rub, the analytical model for the contact between the rotor and stator should be chosen carefully. In this respect, a piecewise-linear model and a rebound model using the coefficient of restitution are investigated on the basis of the experimental observations. Also, Numerical simulations for the two models of contact are done for the various system parameters of clearance, contact stiffness, and friction coefficient. The results show that the piecewise-linear model for partial rotor rub is more plausible to explain the experimental observgations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.902-906
• /
• 2008

The linear motors are easily affected by load disturbance, force ripple, friction, and parameter variations because there is no mechanical transmission to reduce the effects of model uncertainties and external disturbance. For highspeed/high-accuracy position control of a linear-motor-driven two axes, a nonlinear adaptive controller including a cross-coupling algorithm is designed in this paper. The nonlinear effects such as friction and force ripple are estimated and compensated. An enhanced approach for cross-coupling algorithm is proposed to effectively improve the biaxial contour accuracy with the closed-loop stability. The proposed controller is evaluated through the computer simulations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.810-813
• /
• 2004

A study on the dynamic response of single-storey steel frames equipped with a rotational friction damper is presented. Extensive testing was carried out for assessing the friction pad material, damper unit performance and foaled model frame response to lateral harmonics excitation. Numerical simulations based on non-linear time history analysis were used to evaluate the seismic behaviour of steel frames with rotational frictional damper. It Is demonstrated that using discrete friction dampers of proper parameters to link steel frame can reduce dynamic response significantly.