• 제목/요약/키워드: linear discrepancy

검색결과 97건 처리시간 0.029초

Sensitivity Variations with pre-irradiation dose to P-type Semi conductor for radiation dosimetry

  • 최태진;김옥배
    • 한국의학물리학회지:의학물리
    • /
    • 제6권1호
    • /
    • pp.49-57
    • /
    • 1995
  • 반도체검출기는 소형 및 방사선에 고감도특성을 갖고 있으나, 고에너지 광자선 및 전자선등의 조사에 의해 손상을 입어 감도저하를 초래하게 되며 계측시 선량재현성을 기대하기어려워진다. 실험대상은 P-형 실리콘 반도체검출기이며 선량율, 김출방향 및 온도 변화에 따른 선량특성이 조사되었고, 선량재현성을 높이기 위해 18 MeV 고에너지전자선으로 3KGy까지 전처리조사하고 광자선 및 전자선의 전처리조사선량에 대한 감도특성변화를 얻었다. 전처리조사가 작은 0.5KGy인 경우, 저선량율과 고선량율하의 단위선량당 감도는 약 35%의 차이를 보였으며 .3KGy인 경우 약 20%의 차이를 보여 전처리선량이 클 수록 감도차는 작아짐을 알수 있다. 실리콘 반도체검출기의 검출방향성은 임의의 조사각에서 최저치와 최대치의 선량차가 약 13%를 나타내었으며, 검출기의 온도의존성은 4도에서 35도까지 거의 선형성을 보였다.

  • PDF

A new manufacturing method of all ceramic restoration using alumina tape and presentation of clinical cases

  • Oh, Nam-Sik;Kim, Eui-Seong;Lee, Keun-Woo;Han, Jung-Suk;Kim, Dae-Joon;Lee, Myung-Hyun
    • 대한치과보철학회지
    • /
    • 제38권6호
    • /
    • pp.800-805
    • /
    • 2000
  • In an effort to facilitate fabrication procedure of all ceramic crowns, a novel preparation method for all ceramic crown using alumina tape was developed. The alumina tape having a uniform thickness was cast by using Doctor blade method. The physical properties of newly introduced alumina tape has biaxial flexure strength of $500\sim600MPa$. The value of toughness is $3.18\sim3,28MPa.m^{1/2}$ which corelates with fracture and the linear shrinkage rate of the alumina tape is 0.44% during core production. The marginal fitness of the alumina tape all-ceramic restoration with $90{!`}$shoulder margin had average marginal discrepancy at $78.3{\S}$ > and average marginal gap at $44.4{\S}$ >. At the marginal preparation of $135{!`}$deep chamfer, the average marginal discrepancy at $82.1{\S}$ > and the average marginal gap at $40.2{\S}$ > had been reported. This fabrication procedure of all ceramic crowns with alumina tapes is easier and less technical sensitive for dental technicians. After restoration with new all ceramic crowns we followed the patients 2 years later, there were no complications as porcelain fractures or periodontal disease. We had good esthetic clinical results with new all ceramic crowns.

  • PDF

6MV 광자선에서 측정조건의 변화와 측정법의 차이에 의한 절대 선량값의 비교 (The Comparison of Absolute Dose due to Differences of Measurement Condition and Calibration Protocols for Photon Beams)

  • 김회남
    • 대한방사선치료학회지
    • /
    • 제10권1호
    • /
    • pp.11-22
    • /
    • 1998
  • The absolute absorbed dose can be determined according to the measurement conditions ; measurement material, detector, energy and calibration protocols. The purpose of this study is to compare the absolute absorbed dose due to the differences of measurement condition and calibration protocols for photon beams. Dosimetric measurements were performed with a farmer type PTW and NEL ionization chambers in water, solid water, and polystyrene phantoms using 6MV photon beams from Siemens linear accelerator. Measurements were made along the central axis of $10{\times}10cm$ field size for constant target to surface distance of 100cm for water, solid water and polystyrene phantom. Theoretical absorbed dose intercomparisons between TG21 and IAEA protocol were performed for various measurement combinations on phantom, ion chamber, and electrometer. There were no significant differences of absorbed dose value between TG2l and IAEA protocol. The differences between two protocols are within $1\%\;while\;the\;average\;value\;of\;IAEA\;protocol\;was\;0.5\%$ smaller than TG2l protocol. For the purpose of comparison, all the relative absorbed dose were nomalized to NEL ion chamber with Keithley electrometer and water phantom, The average differences are within $1\%,\;but\;individual\;discrepancies\;are\;in\;the\;range\;of\;-2.5\%\;to\;1.2\%$ depending upon the choice of measurement combination. The largest discrepancy of $-25\%$ was observed when NEL ion chamber with Keithley electrometer is used in solid water phantom. The main cause for this discrepancy is due to the use of same parameters of stopping power, absorption coefficient, etc. as used in water phantom. It should be mentioned that the solid water phantom is not recommended for absolute dose calibration as the alternative of water, since absorbed dose show some dependency on phantom material other than water. In conclusion, the trend of variation was not much dependent on calibration protocol. However, It shows that absorbed dose could be affected by phantom material other than water.

  • PDF

골격성 III급 부정교합 환자에서 하악골의 이동량과 교합평면의 변화에 따른 술 후 안정성 (Skeletal Stability after Orthognathic Surgery in Severe Skeletal Class III Malocclusion Patients according to Changes in Anteroposterior Discrepancy and Occlusal Planes)

  • 이정한;김성희;백영재;안경용;황대석;김용덕;김욱규
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제34권6호
    • /
    • pp.404-412
    • /
    • 2012
  • Purpose: The purpose of this study was to evaluate postsurgical facial hard tissue stability after orthognathic surgery with/without posterior impaction in skeletal class III malocclusion patients, and to evaluate the horizontal relapse tendency, according to changes in anteroposterior discrepancy and occlusal planes. Methods: Ninety patients, who had undergone orthognathic surgery in Pusan National University Dental Hospital, were enrolled in this study. Three main groups were classified as follows: Thirty patients underwent mandibular setback bilateral sagittal split ramus osteotomy (BSSRO) only (BSSRO group, BG); another thirty patients underwent mandibular setback BSSRO and Le Fort I osteotomy with posterior impaction (posterior impaction group, PG); and another thirty patients underwent mandibular setback BSSRO and Le Fort I osteotomy without posterior impaction (non-posterior impaction group, NPG). Preoperative (T0), immediate postoperative (T1) and six-month follow-up period (T2) lateral cephalograms were taken, and various parameters were measured. The analyses were done by linear and angular measurements between T0-T1 and T1-T2, to evaluate postsurgical facial hard tissue stability. Results: Mean horizontal relapse rates were distributed from 11.81% to 19.08%, and there were significant postsurgical changes (0.52 mm~2.44 mm) at the B point in all 3 groups. But, there were no statistical differences on relapse rate among BG, PG and NPG patients. Conclusion: In this study, the postsurgical stabilities of BSSRO and Le Fort I osteotomy with/without posterior impaction in skeletal class III malocclusion patients were acceptable. There were no significant statistical differences in mandibular stability according to changes in anteroposterior discrepancy and occlusal planes.

여자 청소년의 신체이미지와 식사태도가 우울감과 자살사고에 미치는 영향 (Effect of Body Image and Eating Attitude on Depressive Mood and Suicide Ideation in Female Adolescents)

  • 송만규;하지현;박두흠;유승호;오정현;유재학
    • 정신신체의학
    • /
    • 제18권1호
    • /
    • pp.40-47
    • /
    • 2010
  • 연구목적 : 자기신체상은 자아존중감과 체중조절행위와 밀접한 연관이 있고 특히 여자 청소년에서는 중요한 관련이 있다고 알려져있다. 이 연구는 체질량지수로 측정한 신체이미지와 식이장애와 연관된 비정상식이행동이 우울증과 자살사고에 미치는 영향을 알아보고자 한다. 방 법 : 서울 한 지역의 고등학교 여학생 239명을 대상으로 체질량지수를 측정하고, 청소년을 위한 식이태도검사(Eating Attitude Test for Korean Adolescents), 자아존중감척도, 충동성척도, 벡 우울척도, 벡 자살사고 척도를 시행하였다. 결 과 : 연구대상에서 식이장애 위험군은 총 10%(24명)이었다. 대조군에 비해 우울증상을 강하게 경험하고 있었고 현재 체질량지수와 이상적 체질량지수의 차이가 클수록 우울감, 자살사고, 비정상적 식이행동의 정도가 커지고 자아존중감은 낮아졌다. 그중에서 체질량지수의 차이가 통계적으로 가장 의미있는 예측인자였다. 결 론 : 연구대상군이 전체적으로 정상체중 범위임에도 불구하고, 현재의 체형과 이상적 체형사이의 괴리가 클수록 우울과 자살사고가 컸다. 여자 청소년의 식이장애 발생과 우울, 자살사고의 예방을 위해 체중조절, 정상식이습관에 대한 교육적 접근이 필요하다는 것을 알 수 있었다.

  • PDF

최적화 기법을 이용한 Nash 모형과 Diskin 모형의 매개변수 추정 (Parameter Estimation for Nash Model and Diskin Model by Optimization Techniques)

  • 최민하;안재현;김중훈;윤용남
    • 한국방재학회 논문집
    • /
    • 제1권3호
    • /
    • pp.73-82
    • /
    • 2001
  • 본 연구에서는 선형모형인 Nash 모형(1957)과 비 선형모형인 Diskin 모형(1964)의 매개변수를 최적화 기법을 사용하여 구하고 모형의 적용성을 검토하였다. 최적화 기법 중에서 최근 들어 활발히 연구되고 있는 유전자 알고리즘(Genetic Algorithm)과 비선형 계획법(Non-linear Programming)을 사용하여 Nash 모형과 Diskin 모형의 매개변수를 추정하였으며, 이를 소양강댐 유역의 호우사상에 적용하여 보았다. Nash 모형과 Diskin 모형에서 각각 유전자 알고리즘과 비 선형 계획법으로 구한 매개변수는 다소의 차이를 나타내며, 유전자 알고리즘과 비선형 계획법을 이용하여 Diskin 모형의 매개변수를 구하여 모의된 유출 수문곡선이 유전자 알고리즘과 비선형 계획법을 이용하여 Nash 모형의 매개변수를 구하여 모의된 유출수문곡선에 비해 실제 유출수문곡선에 더 근접한 결과를 나타냈으며 특히, 첨두치를 더 정확히 모의하였다.

  • PDF

Linear Energy Transfer Dependence Correction of Spread-Out Bragg Peak Measured by EBT3 Film for Dynamically Scanned Proton Beams

  • Lee, Moonhee;Ahn, Sunghwan;Cheon, Wonjoong;Han, Youngyih
    • 한국의학물리학회지:의학물리
    • /
    • 제31권4호
    • /
    • pp.135-144
    • /
    • 2020
  • Purpose: Gafchromic films for proton dosimetry are dependent on linear energy transfers (LETs), resulting in dose underestimation for high LETs. Despite efforts to resolve this problem for single-energy beams, there remains a need to do so for multi-energy beams. Here, a bimolecular reaction model was applied to correct the under-response of spread-out Bragg peaks (SOBPs). Methods: For depth-dose measurements, a Gafchromic EBT3 film was positioned in water perpendicular to the ground. The gantry was rotated at 15° to avoid disturbances in the beam path. A set of films was exposed to a uniformly scanned 112-MeV pristine proton beam with six different dose intensities, ranging from 0.373 to 4.865 Gy, at a 2-cm depth. Another set of films was irradiated with SOBPs with maximum energies of 110, 150, and 190 MeV having modulation widths of 5.39, 4.27, and 5.34 cm, respectively. The correction function was obtained using 150.8-MeV SOBP data. The LET of the SOBP was then analytically calculated. Finally, the model was validated for a uniform cubic dose distribution and compared with multilayered ionization chamber data. Results: The dose error in the plateau region was within 4% when normalized with the maximum dose. The discrepancy of the range was <1 mm for all measured energies. The highest errors occurred at 70 MeV owing to the steep gradient with the narrowest Bragg peak. Conclusions: With bimolecular model-based correction, an EBT3 film can be used to accurately verify the depth dose of scanned proton beams and could potentially be used to evaluate the depth-dose distribution for patient plans.

라디에이션 응력의 재평가 (Re-estimation of Radiation Stress)

  • 김경호;조재희;유동훈
    • 한국해안해양공학회지
    • /
    • 제7권4호
    • /
    • pp.305-312
    • /
    • 1995
  • 일반적으로 선형파동이론에 의해 산정된 라디에이션 응력은 쇄파대내 및 부근에서 과대 평가되는데, 이것이 평균수위변동의 계산치와 실험치와의 불일치의 원인이 된. 오(1995)는 Svendsen (1984)이 제안한 라디에이션 응력을 이용하여 평균수위변동을 산정하고 실험치와 비교한 결과, 파형경사가 작은 경우에는 잘 일치하고 있으나 파형경사가 큰 경우에는 실험치와 잘 맞지 않는 것을 보였다. 본 연구에서는 Svendsen(1984)이 제안한 무차원 라디에이션 상수를 수정하여 쇄파점에서의 상대수심 및 심해파 파형경사의 함수로 표현하여 계산하고, 그 결과를 선형이론, Stive(1984)모델, 쇄파의 성분파고 스펙트럼에 기초한 Sawaragi 등(1984)의 모델 및 기왕의 실험 데이터와 비교하였다. 수정, 제안된 Svendsen 모델의 결과는 실험치와 매우 양호한 일치를 보여 주었다.

  • PDF

Influence of bi-directional seismic pounding on the inelastic demand distribution of three adjacent multi-storey R/C buildings

  • Skrekas, Paschalis;Sextos, Anastasios;Giaralis, Agathoklis
    • Earthquakes and Structures
    • /
    • 제6권1호
    • /
    • pp.71-87
    • /
    • 2014
  • Interaction between closely-spaced buildings subject to earthquake induced strong ground motions, termed in the literature as "seismic pounding", occurs commonly during major seismic events in contemporary congested urban environments. Seismic pounding is not taken into account by current codes of practice and is rarely considered in practice at the design stage of new buildings constructed "in contact" with existing ones. Thus far, limited research work has been devoted to quantify the influence of slab-to-slab pounding on the inelastic seismic demands at critical locations of structural members in adjacent structures that are not aligned in series. In this respect, this paper considers a typical case study of a "new" reinforced concrete (R/C) EC8-compliant, torsionally sensitive, 7-story corner building constructed within a block, in bi-lateral contact with two existing R/C 5-story structures with same height floors. A non-linear local plasticity numerical model is developed and a series of non-linear time-history analyses is undertaken considering the corner building "in isolation" from the existing ones (no-pounding case), and in combination with the existing ones (pounding case). Numerical results are reported in terms of averages of ratios of peak inelastic rotation demands at all structural elements (beams, columns, shear walls) at each storey. It is shown that seismic pounding reduces on average the inelastic demands of the structural members at the lower floors of the 7-story building. However, the discrepancy in structural response of the entire block due to torsion-induced, bi-directionally seismic pounding is substantial as a result of the complex nonlinear dynamics of the coupled building block system.

사용자 평형을 이루는 통행분포와 통행배정을 위한 유전알고리즘 (A Genetic Algorithm for Trip Distribution and Traffic Assignment from Traffic Counts in a Stochastic User Equilibrium)

  • Sung, Ki-Seok
    • 한국경영과학회:학술대회논문집
    • /
    • 한국경영과학회 2006년도 추계학술대회
    • /
    • pp.599-617
    • /
    • 2006
  • 혼잡한 교통네트워크에서 조사된 통행량으로부터 확률적 사용자 평형을 이루는 통행분포와 통행배정을 동시에 구하기 위한 네트워크 모델과 유전알고리즘을 제안하였다. 확률적 사용자 평형을 이루는 모델은 선형제약을 가진 비선형 목적함수를 최소화하는 문제로 정식화하였다. 네트워크 모델에서는 해의 탐색공간을 줄이고 조사된 통행량을 만족시키기 위해서 흐름보존제약을 활용하였다. 목적함수는 흐름보존, 통행발생량, 통행유입량, 조사통행량 등의 제약을 만족하는 링크통행량과, 경로통행배정을 통하여 구한, 확률적 사용자 평형을 이루는 경로통행량을 만족하는 링크통행량의 차이를 최소화하는 것으로 정식화하였다. 제안된 유전알고리즘에서 유전자는 통행분포, 링크통행량, 여행비용계수 등을 나타내는 벡터로 정의하였다. 각 유전자는 목적함수의 값으로 구한 적합도에 따라 평가되며, 병행단체교차와 돌연변이에 의하여 진화한다.

  • PDF