• 대한교통학회지
• /
• 제22권4호
• /
• pp.97-106
• /
• 2004

최근에 친환경적성에 대한 사회적 관심이 높아짐에 따라 도로건설에 있어서도 주변자연 조건을 훼손을 최소화할 수 있는 터널에 대한 수요가 늘어나고 있고(2001년 12월 현재 전년대비 42.7% 증가), 터널의 연장도 장대화(일반적으로 연장 1km이상의 터널)되고 있다. 그러나 장대터널은 장시간동안 좁고 한정된 공간에서의 주행을 하게 되는 운전자의 심리적 불안감을 증가시키고 집중력과 주변지역으로부터의 외부정보 인지가 충분하지 않는 등 인적, 물적의 다양한 교통문제와 깊은 관련을 갖고 있다. 따라서 본 연구에서는 현재 개통 운영 중인 터널을 대상으로 조명색채에 따른 내부경관을 연구함으로서 터널 내부조명시설의 개선을 통한 주행 쾌적성의 증대효과를 기대할 수 있는 방안제시에 주 목적을 두고 있다. 본 연구에서는 조명색채에 대한 감성이미지를 나타내기 위한 형용사 선정을 위하여 컬러 플래닝 시스템(CPS)를 사용하였다. CPS는 인간의 감성 표현을 정의된 "용어"로 표현하고 이 "용어"는 "이미지 스케일"상에 검색되어 이에 결합된 "이미지 패널"로 특정의 색채로 지정되는 일련의 과정을 나타낸다. 그리고 이렇게 선정된 용어로 SD(Semantic Differential Scale)법을 이용하여 설문지를 작성하고, 요인분석을 통해 피실험자들의 의식구조를 파악하였다. 또한 LISREL을 이용하여 터널 내부경관의 '선호도'를 종속변수로 한 모형을 구축한 결과, 조명색채에 대한 경관선호도에 영향을 미치는 요인으로 색채의 정서성과 기능성을 제시하였다.

• 한국지능시스템학회논문지
• /
• 제21권6호
• /
• pp.749-754
• /
• 2011

본 연구에서는 최적 pRBFNNs 패턴분류기 기반 2차원 영상과 ASM 알고리즘을 이용한 얼굴인식 시스템을 설계하고자 한다. 기존의 2차원 영상 기반 얼굴 인식 기법들은 인식하고자 하는 객체의 영상내의 위치, 크기 및 배경의 존재 유무에 따라 인식률이 영향을 받는 단점이 있으며, 본 연구에서는 이를 보완하기 위하여 관심 영역 내에서의 얼굴 영역 추출 및 특징 추출기법을 이용한 얼굴인식 방법을 소개한다. 본 연구에서는 CCD 카메라를 이용하여 영상을 획득하고 히스토그램 평활화를 이용하여 조명으로 왜곡된 영상정보를 개선한다. AdaBoost 알고리즘을 이용하여 얼굴영역을 검출하고 ASM을 통하여 얼굴 윤곽선 및 형상을 추출하여 개인 프로필을 구성한 후 PCA 알고리즘을 사용하여 고차원 얼굴데이터의 차원을 축소한다. 그리고 인식 모듈로서 pRBFNNs 패턴분류기를 제안한다. 제안된 다항식 기반 RBFNNs은 조건부, 결론부, 추론부 세 가지의 기능적 모듈로 구성되어 있고 조건부는 퍼지 클러스터링을 사용하여 입력 공간을 분할하고, 결론부는 분할된 로컬 영역을 다항식 함수로 표현한다. 또한 차분진화 알고리즘을 이용하여 제안된 분류기의 파라미터, 즉, 학습률, 모멘텀 계수, 퍼지 클러스터링의 퍼지화 계수를 최적화한다. 제안된 다항식 기반 RBFNNs는 얼굴 인식을 위한 패턴분류기로서 직접 CCD 카메라로부터 입력받은 데이터를 영상 보정, 얼굴 검출 및 특징 추출 등과 같은 데이터 전 처리 과정을 포함하여 고차원 데이터로 이루어진 얼굴 영상에 대한 인식 성능을 확인한다.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.101-109
• /
• 1999

This study attempts to analyse the solid mixing in the feeder and the packing effect for pressure fluctuations in the fluidized bed. To study the mixing characteristics of solid in vibrating feeder for the stable operations of fluidized combustion, the system consisted of two groups of particles such that fine particles were located on the top of the coarse particles before vibratory mixing had started. The effects of packing materials on the pressure fluctuations in a fluidized bed were analysed by using a statistical method to interpret the behavior of fluidized bed. The experiments were carried out in a fluidized bed of 6.7cm-ID, and the experimental variables were particle sizes, of 115 to 1,015$\mu\textrm{m}$ in diameter and the multi-sized particles haying Rosin-Rammler and Gaussian distributions. The settled bed heights of particles to diameter ratios (L/D) were ranged from 0.5 to 2.0. And fluidizing of particles was carried out by air. The packing materials used were screen packing, and the properties of the pressure fluctuations in the fluidized bed were measured by a differential pressure transducer. The properties of the pressure fluctuations calculated were the mean, the standard deviation, and the major frequency of the power spectral density functions. From the characteristics of fluidizing, it was found that the standard deviation of pressure fluctuations could be effectively used to explain the fluidized phenomena, and the packing materials affected severely the properties of the pressure fluctuations. As a result, from the interpretation by spectral analysis, the effects of measuring radius of pressure fluctuations on standard deviation were constant in the case of the fluidized bed with and without packing materials. However, the effects of measuring the height of pressure fluctuations on standard deviations were linear increasing for the fluidized bed with packing materials, but were constant for the fluidized bed without packing materials at 4.5cm above the gas distributor. The major frequency of pressure fluctuations was found to be nearly independent of fluidized system. Also, the major frequency of pressure fluctuations decreased with increasing packing size, and it had maximum value at 10% of the packing amount.

• 한국컴퓨터산업학회논문지
• /
• 제7권4호
• /
• pp.427-436
• /
• 2006

운동하는 물체의 동특성 해석을 위한 상태 공간 모델 방식이 컴퓨터에 의한 미분방정식 해석의 수학적인 도구로서 도입되었다. 시스템 표현이 간단한 행렬 연산 형태로 이루어지므로 선형 및 비선형, 시변 및 시불변 시스템과 단변수 및 다변수 시스템 등에 대하여 통일된 방식의 모델이 사용가능하다. 그리고 이러한 상태 공간 모델을 해석하기위해서는 복잡한 벡터 연산을 하여야 하지만 패킷 소프트웨어의 특정함수를 사용하여 쉽게 해석할 수가 있다. 그러나 최근에는 상용 프로그램의 발전에 따라 동특성 해석을 위한 상태 공간 모델을 대화형 도형 처리를 하여 매우 간단하게 동특성을 시뮬레이션 할 수 있는 방법이 제공되고 있다. 본 논문은 운동하는 물체의 동특성 해석을 하는 데 교육용으로 활용할 수 있는 시뮬레이터를 개발하는 목적으로 항공기의 세로 동특성 해석을 위한 시뮬레이션을 수행하고자 하였으며 항공기 세로 안정성에 대한 과도응답 특성을 해석하는 시뮬레이터를 설계하였다.

• 한국통신학회논문지
• /
• 제27권7A호
• /
• pp.711-723
• /
• 2002

ISO/IEC MPEG-4 FGS (finer granular scalable) 비디오 스트림을 패킷손실 측면의 차등서비스 (differentiated services: DiffServ) 네트워크상에서 차별화 전송하는 시스템을 제안하고, 그 성능을 분석한다. 이를 위한 전체 제안시스템의 구조는 크게 다음의 3 부분으로 나눌 수 있다. 즉 1) 선형 근사화한 전송율-왜곡치 (rate-distortion: R-D) 모델를 사용하여 비디오 품질를 일정하게 유지하는 최적의 계층화된 전송율 적응 제어 부분, 2) 각각의 비디오 패킷이 손실될 때 전체품질에 미치는 영향을 고려하는 우선순위 패킷화 (prioritized packetization) 부분, 그리고 3) 이와 같이 우선순위화된 비디오 패킷 스트림을 차등서비스 네트워크 상에서 차별화 전송을 수행하는 부분으로 구분할 수 있다. 따라서 상기한 3 부분들이 효율적으로 연동되어 비디오 전송을 수행할 때, 동일한 네트워크 자원이 주어진 경우 얻을 수 있는 종단간 (end-to-end) 비디오 품질의 향상을 비교 분석하였다.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.409-423
• /
• 2022

Nowadays, there is a high demand for great structural implementation and multifunctionality with excellent mechanical properties. The porous structures reinforced by graphene platelets (GPLs) having valuable properties, such as heat resistance, lightweight, and excellent energy absorption, have been considerably used in different engineering implementations. However, stiffness of porous structures reduces significantly, due to the internal cavities, by adding GPLs into porous medium, effective mechanical properties of the porous structure considerably enhance. This paper is relating to vibration analysis of fluidconveying cantilever porous graphene platelet reinforced (GPLR) pipe with fractional viscoelastic model resting on foundations. A dynamical model of cantilever porous GPLR pipes conveying fluid and resting on a foundation is proposed, and the vibration, natural frequencies and primary resonant of such a system are explored. The pipe body is considered to be composed of GPLR viscoelastic polymeric pipe with porosity in which Halpin-Tsai scheme in conjunction with the fractional viscoelastic model is used to govern the construction relation of nanocomposite pipe. Three different porosity distributions through the pipe thickness are introduced. The harmonic concentrated force is also applied to the pipe and the excitation frequency is close to the first natural frequency. The governing equation for transverse motions of the pipe is derived by the Hamilton principle and then discretized by the Galerkin procedure. In order to obtain the frequency-response equation, the differential equation is solved with the assumption of small displacement, damping coefficient, and excitation amplitude by the multiple scale method. A parametric sensitivity analysis is carried out to reveal the influence of different parameters, such as nanocomposite pipe properties, fluid velocity and nonlinear viscoelastic foundation coefficients, on the primary resonance and linear natural frequency. Results indicate that the GPLs weight fraction porosity coefficient, fractional derivative order and the retardation time have substantial influences on the dynamic response of the system.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.201-216
• /
• 2024

This paper is motivated by the lack of studies relating to vibration and nonlinear resonance of fluid-conveying cantilever porous GPLR pipes with fractional viscoelastic model resting on nonlinear foundations. A dynamical model of cantilever porous Graphene Platelet Reinforced (GPLR) pipes conveying fluid and resting on nonlinear foundation is proposed, and the vibration, natural frequencies and primary resonant of such system are explored. The pipe body is considered to be composed of GPLR viscoelastic polymeric pipe with porosity in which Halpin-Tsai scheme in conjunction with fractional viscoelastic model is used to govern the construction relation of the nanocomposite pipe. Three different porosity distributions through the pipe thickness are introduced. The harmonic concentrated force is also applied on pipe and excitation frequency is close to the first natural frequency. The governing equation for transverse motion of the pipe is derived by the Hamilton principle and then discretized by the Galerkin procedure. In order to obtain the frequency-response equation, the differential equation is solved with the assumption of small displacement, damping coefficient, and excitation amplitude by the multiple scale method. A parametric sensitivity analysis is carried out to reveal the influence of different parameters, such as nanocomposite pipe properties, fluid velocity and nonlinear viscoelastic foundation coefficients, on the primary resonance and linear natural frequency. Results indicate that the GPLs weight fraction porosity coefficient, fractional derivative order and the retardation time have substantial influences on the dynamic response of the system.

• Advances in nano research
• /
• 제16권4호
• /
• pp.325-340
• /
• 2024

There are several novel uses for dispersing many nanoparticles into a conventional fluid, including dynamic sealing, damping, heat dissipation, microfluidics, and more. Therefore, melting heat and mass transfer characteristics of a 3-D MHD Hybrid Nanofluid flow over a rotating disc with presenting dufour and soret effects are assessed numerically in this study. In this instance, we investigated both ferric sulfate and molybdenum disulfide as nanoparticles suspended within base fluid water. The governing partial differential equations are transformed into linked higher-order non-linear ordinary differential equations by the local similarity transformation. The collection of these deduced equations is then resolved using a Chebyshev spectral collocation-based algorithm built into the Mathematica software. To demonstrate how different instances of hybrid/ nanofluid are impacted by changes in temperature, velocity, and the distribution of nanoparticle concentration, examples of graphical and numerical data are given. For many values of the material parameters, the computational findings are shown. Simulations conducted for different physical parameters in the model show that adding hybrid nanoparticle to the fluid mixture increases heat transfer in comparison to simple nanofluids. It has been identified that hybrid nanoparticles, as opposed to single-type nanoparticles, need to be taken into consideration to create an effective thermal system. Furthermore, porosity lowers the velocities of simple and hybrid nanofluids in both cases. Additionally, results show that the drag force from skin friction causes the nanoparticle fluid to travel more slowly than the hybrid nanoparticle fluid. The findings also demonstrate that suction factors like magnetic and porosity parameters, as well as nanoparticles, raise the skin friction coefficient. Furthermore, It indicates that the outcomes from different flow scenarios correlate and are in strong agreement with the findings from the published literature. Bar chart depictions are altered by changes in flow rates. Moreover, the results confirm doctors' views to prescribe hybrid nanoparticle and particle nanoparticle contents for achalasia patients and also those who suffer from esophageal stricture and tumors. The results of this study can also be applied to the energy generated by the melting disc surface, which has a variety of industrial uses. These include, but are not limited to, the preparation of semiconductor materials, the solidification of magma, the melting of permafrost, and the refreezing of frozen land.

• Smart Structures and Systems
• /
• 제30권5호
• /
• pp.521-535
• /
• 2022

Efficient management of deteriorating civil infrastructure is one of the most important research topics in many developed countries. In particular, the remote displacement measurement of bridges using linear variable differential transformers, global positioning systems, laser Doppler vibrometers, and computer vision technologies has been attempted extensively. This paper proposes a remote displacement measurement system using closed-circuit televisions (CCTVs) and a computer-vision-based method for in-situ bridge bearings having relatively large displacement due to temperature change in long term. The hardware of the system is composed of a reference target for displacement measurement, a CCTV to capture target images, a gateway to transmit images via a mobile network, and a central server to store and process transmitted images. The usage of CCTV capable of night vision capture and wireless data communication enable long-term 24-hour monitoring on wide range of bridge area. The computer vision algorithm to estimate displacement from the images involves image preprocessing for enhancing the circular features of the target, circular Hough transformation for detecting circles on the target in the whole field-of-view (FOV), and homography transformation for converting the movement of the target in the images into an actual expansion displacement. The simple target design and robust circle detection algorithm help to measure displacement using target images where the targets are far apart from each other. The proposed system is installed at the Tancheon Overpass located in Seoul, and field experiments are performed to evaluate the accuracy of circle detection and displacement measurements. The circle detection accuracy is evaluated using 28,542 images captured from 71 CCTVs installed at the testbed, and only 48 images (0.168%) fail to detect the circles on the target because of subpar imaging conditions. The accuracy of displacement measurement is evaluated using images captured for 17 days from three CCTVs; the average and root-mean-square errors are 0.10 and 0.131 mm, respectively, compared with a similar displacement measurement. The long-term operation of the system, as evaluated using 8-month data, shows high accuracy and stability of the proposed system.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.82-90
• /
• 2012

Four different buildings having various wall construction are analyzed for the effect of wall mass on the thermal performance and inside building air and wall temperature transient and also for calculating the energy consumption load. This analytical study was motivated by the experimental work of Burch et al. An analytical solution of one-dimensional, linear, partial differential equations is obtained using the Laplace transform method, Bromwich and modified Bromwich contour method. A simple dynamic model using steady state analysis as simplified methods is developed and results of energy consumption loads are compared with results obtained using the analytical solution. Typical Meteorological Year data are processed to yield hourly average monthly values. This study is conducted using weather data from two different locations in Korea: Daegu having severe weather in summer and winter and Jeju having mild weather almost all year round. There is a significant wall mass effect on the thermal performance of a building in mild weather condition. Buildings of heavyweight construction with insulation show the highest comfort level in mild weather condition. A proportional controller provides the higher comfort level in comparison with buildings using on-off controller. The steady state analysis gives an accurate estimate of energy load for all types of construction. Finally, it appears that both mass and wall insulation are important factors in the thermal performance of buildings, but their relative merits should be decided in each building by a strict analysis of the building layout, weather conditions and site condition.