• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1841-1844
• /
• 2005

A linear motor makes a long stroke by accumulating short steps, which is based on the quasistatic deformation of a magnetostrictive material in a magnetic field. It's also called as inchworm effect. The application areas of linear motors are an adaptive and active optics, X-Y positioning, precision alignment, etc. It is found that control of the frequency and current inputs are all that is necessary to control the speed handling ability of the linear motor. In inchworm mode, linear speeds of up to $500{\mu}m/s$ are achieved resulting from the accumulation of $25{\mu}m$ steps at 1.4A.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.61-63
• /
• 1999

This paper reports analysis and test results on the new type Linear Oscillatory Actuator(LVDT actuator) which has been expected to be applied not only to measure position but also to drive as an actuator at the same time.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1071-1076
• /
• 2008

This paper presents the self power generation from vibration using the piezoelectric bimorph actuator. The piezoelectric bimorph actuator was well developed with PZT-PNN-Fe piezoelectric ceramics. As the applied voltage was increased, a linear change of displacement was obtained with a relatively high ratio of 12.53 um/V for the bimorph actuator. Moreover, when the motor's rotational speed was 2000 rpm, the bimorph actuator, which has a resonance frequency of 68 Hz, exhibited the most efficient generation voltage of 10.4 V. This bimorph actuator could make the LED, emitting 60 mW, working successfully. Therefore, it is anticipated that the bimorph actuator will be useful as a power source for the next-generation electronic devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3322-3324
• /
• 1999

This paper studies on the design and fabrication of a micro in-plane positioning actuator integrated with a microlens. Proposed in-plane actuator is a micro XY-stage which is composed of two linear comb drive actuators being orthogonal to each other. In the fabrication of actuator, the single crystalline silicon substrate anodically bonded with a #7740 glass substrate is used because of simple release and passivation. The structure of actuator is formed on the silicon facet of bonded fixture by chlorine-based deep RIE and then released by isotropic wet etching of glass (#7740) in hydrofluoric acid solution. Fabricated actuator has a large travel range up to $30({\pm}15){\mu}m$ and high resolution less than 0.01f1l1l in each direction. Experimented resonant frequency of this actuator is 630Hz. The micro-Fresnel lens is fabricated on the square-shape glass structure prepared in the center of actuator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.351-351
• /
• 2004

For greeting the era of ubiquitous network, data storage devices have been essentially attached to mobile data devices. As a result, the minimization of the storage device has arisen as major interests in the next generation data storage technology. So, there are many researches for the small form factor ODD. In this paper, we propose a pick up that consists of a linear VCM and 2-wire focusing actuator for a small form factor ODD. For the sake of checking performance of the coarse actuator, PID controller is designed. Experiment with controller and DSP board shows its propriety as a fine tracking actuator. And, 2-wire suspension actuator is designed in order to be contained in a coarse actuator and to satisfy the thickness of a PCMCIA type. Through the experiment of designed actuator, It verifies performance as a focusing actuator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.488-491
• /
• 2006

In this paper, a slim type actuator is proposed rising a bimorph PZT and a circular rotor link. The bimorph contacts the circular rotor, and its displacement generates the rotational motion of the rotor. The rotor causes the linear motion of AF and zoom lens through gear and a motion guide. The proposed model enables the actuations of many lens groups for zoom module by extending the single lens model. The important design parameter is the contact force determined by the frictional coefficient and preload between the rotor and PZT bimorph. A prototype of the single actuator model is manufactured and experiments results using LDV and tachometer are compared to the theoretical and numerical predictions. Experiments show the linear bimorph actuator model meets the performance criteria of the lens actuation, and it can be applicable to various slim type actuators for AF and zoom motions in mobile cameras.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1990-1996
• /
• 2004

This paper presents a nonlinearly modulated digital actuator (NMDA) for producing nano-precision digital stroke. The NMDA, composed of a digital microactuator and a nonlinear micromechanical modulator, purifies the stroke of the digital actuator in order to generate the high-precision displacement output required for nano-positioning devices. The function and concept of the nonlinear micromechanical modulator are equivalent to those of the nonlinear electrical limiters. The linear and nonlinear modulators, having an identical input and output strokes of 15.2${\mu}{\textrm}{m}$ and 5.4${\mu}{\textrm}{m}$, are designed, fabricated and tested, respectively. The linear and nonlinear modulators are linked to identical digital actuators in order to compare the characteristics of the linearly modulated microactuator (LMDA) and NMDA. In addition, an identical linear modulator is attached to the output ports of LMDA and NMDA. The NMDA shows the repeatability of 12.3$\pm$2.9nm, superior to that of 27.8$\pm$2.9nm achieved by LMDA. When the identical linear modulator is connected to LMDA and NMDA, the final modulated output from NMDA shows the repeatability of 10.3$\pm$7.2nm, superior to that of 15.7$\pm$7.7nm from LMDA. We experimentally verify the displacement purifying capability of the nonlinear mechanical modulator, applicable to nano-precision positioning devices and systems.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.301-309
• /
• 2003

제어기 포화를 고려한 비선형 제어 알고리듬은 폭넓게 연구되었으나 비선형성과 확률밀도함수(PDF)의 해석해가 존재하지 않기 때문에 알고리듬의 확률적 연구가 미진하여 왔다. 본 연구에서는, 제어기포화를 고려한 비선형 제어 알고리듬의 확률적 해석 방법이 등가 비선형 시스템 방법에 기초하여 제안되었다. 가우시안 백색잡음과 Kanai-Tagimi 필터통과 백색잡음에 의한 구조물 응답에 대하여 제안된 PDF 근사식을 이용하여 얻어진 결과를 통계적으로 얻어진 구조물 응답 PDF와 비교하여 정확성을 검증하였다.

• International Journal of Control, Automation, and Systems
• /
• 제2권3호
• /
• pp.279-288
• /
• 2004

This paper presents a novel design for a tubular linear brushless permanent-magnet motor. In this design, the magnets in the moving part are oriented in an NS-NS―SN-SN fashion which leads to higher magnetic force near the like-pole region. An analytical methodology to calculate the motor force and to size the actuator was developed. The linear motor is operated in conjunction with a position sensor, three power amplifiers, and a controller to form a complete solution for controlled precision actuation. Real-time digital controllers enhanced the dynamic performance of the motor, and gain scheduling reduced the effects of a nonlinear dead band. In its current state, the motor has a rise time of 30 ms, a settling time of 60 ms, and 25% overshoot to a 5-mm step command. The motor has a maximum speed of 1.5 m/s and acceleration up to 10 g. It has a 10-cm travel range and 26-N maximum pull-out force. The compact size of the motor suggests it could be used in robotic applications requiring moderate force and precision, such as robotic-gripper positioning or actuation. The moving part of the motor can extend significantly beyond its fixed support base. This reaching ability makes it useful in applications requiring a small, direct-drive actuator, which is required to extend into a spatially constrained environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.69-71
• /
• 1994

In fabricating linear actuator using the GMA(Giant Magnetostrictive Alloy : Terfenol-D). the clamping unit is needed to accumlate each displacement from the GMA rod. Two types of the clamping unit (one is using piezoelectric device and the other electromagnetic farce) were made and tested. From the result of the experiment, we conclude that the electromagnetic clamping unit has advantages over the piezoelectric clamping unit.