• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.49-58
• /
• 2010

This paper presents experimental results of a series of 1-g shaking table model tests performed on end-bearing single piles and pile groups to investigate the effect of particle size on the dynamic behavior of soil-pile systems. Two soil-pile models were tested twice: first using Jumoonjin sand, and second using Australian Fine sand. In the case of single-pile models, the lateral displacement was almost within 1% of pile diameter which corresponds to the elastic range of the pile. The back-calculated p-y curves show that the subgrade reaction of the Jumoonjin-sand-model ground was larger than that of the Australian Fine-sand-model ground at the same displacement. This phenomenon means that the stress-strain behavior of Jumoonjin sand was initially stiffer than that of Australian Fine sand. This difference was also confirmed by resonant column tests and compression triaxial tests. And the single pile p-y backbone curves of the Australian fine sand were constructed and compared with those of the Jumoonjin sand. As a result, the stiffness of the p-y backbone curves of Jumunjin sand was larger than those of Australian fine sand. Therefore, using the same p-y curves regardless of particle size can lead to inaccurate results when evaluating dynamic behavior of soil-pile system. In the case of the group-pile models, the lateral displacement was much larger than the elastic range of pile movement at the same test conditions in the single-pile models. The back-calculated p-y curves in the case of group pile models were very similar in both sands because the stiffness difference between the Jumoonjin-sand-model ground and the Australian Fine-sand-model ground was not significantly large at a large strain level, where both sands showed non-linear behavior. According to a series of single pile and group pile test results, the evaluation group pile effect using the p-multiplier can lead to inaccurate results on dynamic behavior of soil-pile system.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.242-275
• /
• 2022

This study tries to reveal the structure of the "Kisun"(senior envoy ship) taken by senior envoys for the 10^th to 12^th visits to Japan from the perspective of professional shipbuilding engineering focusing on the theory of the ship in the travel logs of royal envoys to Japan (Sahaengrok) written by Joseon Tongsinsa that includes 12 visits to Japan for about 200 years from 1607 to 1811. The results of the study showed that the size of Kisun for the 10^th to 12^th envoy visits was 19 Pa (把) and a half in length and 6 Pa (把) and 2 Cheok (尺) in width. The height of the Sampan was found to be 2 Pa (把) and 1 Cheok (尺) based on records in Gyemisusarok and Jeungjeonggyorinji. The structure of Kisun was different for each visit but, it was found that Kisun was mainly composed of a main deck, bow (bow plate, stem plate), stern (stern plate), Sampan, Meonge (support), Garyong (support), Sinbang, Gungji, deck, two masts and sail, Gurejjak (mast support), Panok, stern Panok, Taru, dodger, anchor reel, stairs, rail, rudder, oar, and anchor. In addition, wood and iron nails were used together for connection. It was also found that the sail was made of herbage and cotton. This study found that Kisun, which was operated for the 10^th and 12^th envoy visits, was big in terms of length and height among the Joseon Tongsinsa fleet to show the authority and dignity of Joseon and that it had passages outside on the sides of the vessel and paddles were located between the sides and Panok structure and rails were installed on four sides on the Panok, improving stability and linear beauty. The walls of Panok were decorated with the royal Dancheong pattern and fancy murals. In addition, it was found that they wished for a safe voyage by drawing a demon face on the bow. Therefore, it was revealed that Kisun, which was taken by envoys as recorded in travel logs, was made by the state and equipped with structures and functions that enabled international voyages.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.173-182
• /
• 2016

This study was aimed to identify the phenotypic relationships between calving interval and lactation curve parameters in Korean Holstein cow. The data of 36,505 lactation records was obtained from the Dairy Herd Improvement program run by Dairy Cattle Improvemnet Center of National Agricultural Federation of Korea. All lactation records were collectied from the multiparous cows calving between 2011 to 2013. The estimated lactation curves were drawn using Wood model based on actual milk yield records, and NLIN Procedure of SAS program (ver. 9.2). General linear multivariate models for calving interval, 305-d milk yield, lactation parameters(A, b, c), persistency, peak day, and peak yield included fixed effects of calving year-season (spring, summer, fall and winter) and parity(2, 3 and 4). For calving interval, 305-d milk yield, lactation parameters(A, b, c), persistency, peak day and peak yield, all two fixed effect(calving year-season, parity) were significant(p<0.05). The estimated lactation functions using Wood model for 2, 3, and 4 parity were yt=24.66t0.175e-0.00302t, yt=24.69t0.192e-0.00334t, and yt=24.22t0.200e-0.00341t, respectively. Phenotypic correlation (partial residual correlation) between calving interval and 305-d milk yield, A, b, c, persistency, peak day, and peak yield were 0.093, -0.014, 0.028, -0.046, 0.099, 0.085, and 0.052, respectively. To conclude, if calving interval increase then ascent to peak, persistency, peak day and peak yield are increase, and descent after peak is decrease. So, total 305-d milk yield is increase.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.305-314
• /
• 2023

With the development of medical technology and radiation treatment equipment, the frequency of high-precision radiation therapy such as intensity modulation radiation therapy has increased. Image-guided radiation therapy has become essential for radiation therapy in precise and complex treatment plans. In particular, with the introduction of imaging equipment for diagnosis in a linear accelerator, CBCT scanning became possible, which made it possible to calibrate and correct the patient's posture through 3D images. Although more precise reproduction of the patient's posture has become possible, the exposure dose delivered to the patient during the image acquisition process cannot be ignored. Radiation optimization is necessary in the field of radiation therapy, and efforts to reduce exposure are necessary. However, when acquiring 3D CBCT images by changing the imaging conditions to reduce exposure, there should be no image quality or artefacts that would make it impossible to align the patient's position. In this study, Rando phantom was used to scan and evaluate images for each shooting condition. The highest SNR was obtained at 100 kV 80 mA 25 ms F1 filter 180°. As the tube voltage and tube current increased, the noise decreased, and the bowtie filter showed the optimal effect at high tube current. Based on the actual scanned images, it was confirmed that patient alignment was possible under all imaging conditions, and that image-guided radiation therapy for patient alignment was possible under the condition of 70 kV 10 mA 20 ms F0 filter 180°, which showed the lowest SNR. In this study, image evaluation was conducted according to the imaging conditions, and low tube voltage, tube current, and small rotation angle scan are expected to be effective in reducing radiation exposure. Based on this, the patient's exposure dose should be kept as low as possible during CBCT imaging.

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.207-221
• /
• 2023

This study suggests deep neural network models for estimating air temperature with Level 1B (L1B) datasets of GEO-KOMPSAT-2A (GK-2A). The temperature at 1.5 m above the ground impact not only daily life but also weather warnings such as cold and heat waves. There are many studies to assume the air temperature from the land surface temperature (LST) retrieved from satellites because the air temperature has a strong relationship with the LST. However, an algorithm of the LST, Level 2 output of GK-2A, works only clear sky pixels. To overcome the cloud effects, we apply a deep neural network (DNN) model to assume the air temperature with L1B calibrated for radiometric and geometrics from raw satellite data and compare the model with a linear regression model between LST and air temperature. The root mean square errors (RMSE) of the air temperature for model outputs are used to evaluate the model. The number of 95 in-situ air temperature data was 2,496,634 and the ratio of datasets paired with LST and L1B show 42.1% and 98.4%. The training years are 2020 and 2021 and 2022 is used to validate. The DNN model is designed with an input layer taking 16 channels and four hidden fully connected layers to assume an air temperature. As a result of the model using 16 bands of L1B, the DNN with RMSE 2.22℃ showed great performance than the baseline model with RMSE 3.55℃ on clear sky conditions and the total RMSE including overcast samples was 3.33℃. It is suggested that the DNN is able to overcome cloud effects. However, it showed different characteristics in seasonal and hourly analysis and needed to append solar information as inputs to make a general DNN model because the summer and winter seasons showed a low coefficient of determinations with high standard deviations.

• Journal of Service Research and Studies
• /
• v.11 no.4
• /
• pp.1-20
• /
• 2021

This study was conducted to derive a model of the legal system that is the basis for realizing the service economy, political administration, and social education system. Based on the experience of mankind's legal system operation in the historical era for the past 5,000 years, a legal system model that will make the future human society sustainable has been established. The problems of the current legal system were analyzed at the fundamental level. The root cause of injustice and unfairness was analyzed and a new legal system was designed. Through the legal systems of various national societies that have been attempted in the history of mankind, the structure of the legal system that is desirable for the modern society was designed. Human society, which has experienced how much good legal system has been and is being abused by human irrationality and nonsense, needs to make an effort to change the legal system paradigm itself by learning lessons from failure. This study derives the basis for a legal system that can realize justice and a fair society in the long term. It proposed a model for improving the legal system that allows human society to be happy for a long time. To this end, the fundamental role of the legal system was analyzed at the ideological level and the problems of the current legal system were presented. In addition, the problem of fundamental assumptions about human nature was analyzed and improved assumptions were presented. The structural system of the current legal system was analyzed and a new structure was proposed. In addition, a plan for the operation of a new legal system based on a new structure was suggested. The new legal system was named servicism system. This is because it is a model centered on thorough checks and balances between all opponents, not a simple linear one-dimensional legal system, but a multidimensional legal system, and because it is a viewpoint that clearly recognizes both human reason and desire. The new system is a model that reflects the confrontation between the rule of law and the non-law rule and the confrontation between the power people and the general public. A follow-up study is needed on a concrete plan for transitioning from the current legal system to a new legal system.

• Sleep Medicine and Psychophysiology
• /
• v.29 no.1
• /
• pp.21-28
• /
• 2022

Objectives: Our study aimed to investigate the relationship between the anxiety at first year and chronotype and sleep quality at third year in medical students. We also investigated the association between sleep quality, chronotype, depression and resilience at third year. Methods: Fifty two medical students (36 males, 69%, aged 21 ± 0.93) in first year, and forty four medical students (31 males, 70.5%, aged 23.05 ± 0.99) at third year answered Beck Depression Inventory 2, Beck anxiety inventory, Insomnia severity index-K, Composite scale of morningness and Conner-Davidson Resilience scale-10. Multiple linear regression analysises were performed to identify predictors of chronotype, sleep quality and resilience. Results: Higher anxiety (β = -0.434, p = 0.006) at first year was significant predictor of eveningness at third year, while lower anxiety score (β = 0.606, p < 0.001) at first year was significant predictor of sleep quality at third year. Lower sleep quality (β = -0.314, p = 0.042) and eveningness (β = 0.315, p = 0.041) were associated with low resilience at third year. Also, Lesser depression (β = -0.717, p < 0.001) was associated with higher resilience at third year. Conclusion: Our study showed that higher anxiety in first year had significantly related with eveningness and poor sleep quality at third year. In addition, higher sleep quality, morningness and less depression had significantly associated with better resilience at third year.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.121-135
• /
• 2010

This study is to assess the effect of potential future climate change on the inflow of agricultural reservoir and its impact to downstream streamflow by reservoir operation for paddy irrigation water supply using the SLURP. Before the future analysis, the SLURP model was calibrated using the 6 years daily streamflow records (1998-200398 and validated using 3 years streamflow data (2004-200698 for a 366.5 $km^2$ watershed including two agricultural reservoirs (Geumgwang8 and Gosam98located in Anseongcheon watershed. The calibration and validation results showed that the model was able to simulate the daily streamflow well considering the reservoir operation for paddy irrigation and flood discharge, with a coefficient of determination and Nash-Sutcliffe efficiency ranging from s 7 to s 9 and 0.5 to s 8 respectively. Then, the future potential climate change impact was assessed using the future wthe fu data was downscaled by nge impFactor method throuih bias-correction, the future land uses wtre predicted by modified CA-Markov technique, and the future ve potentiacovfu information was predicted and considered by the linear regression bpowten mecthly NDVI from NOAA AVHRR ima ps and mecthly mean temperature. The future (2020s, 2050s and 2e 0s) reservoir inflow, the temporal changes of reservoir storaimpand its impact to downstream streamflow watershed wtre analyzed for the A2 and B2 climate change scenarios based on a base year (2005). At an annual temporal scale, the reservoir inflow and storaimpchange oue, anagricultural reservoir wtre projected to big decrease innautumnnunder all possiblmpcombinations of conditions. The future streamflow, soossmoosture and grounwater recharge decreased slightly, whtre as the evapotransporation was projected to increase largely for all possiblmpcombinations of the conditions. At last, this study was analysed contribution of weather, vegetation and land use change to assess which factor biggest impact on agricultural reservoir and stream watershed. As a result, weather change biggest impact on agricultural reservoir inflow, storage, streamflow, evapotranspiration, soil moisture and groundwater recharge.

• Journal of Nutrition and Health
• /
• v.56 no.3
• /
• pp.264-276
• /
• 2023

Purpose: Food environmental factors related to food insecurity affect household food intake in several socio-ecological aspects. This study explores the relationship between food environment factors and food insecurity in households with married immigrant women. Methods: From November 2018 to February 2020, a survey was conducted enrolling 249 married immigrant women residing in the metropolitan areas of South Korea. In the final analysis, 229 subjects were divided into 2 groups classified as food security (n = 154) and food insecurity (n = 75), as assessed by the score of food security. Three aspects of food environments were measured: built·natural, political·economic, and socio-cultural Results: Food environments were significantly different between food security and food insecurity groups, as follows: the number of foods market and their distance from the home and food status for the last week at home in the built·natural domain; monthly cost of food purchase and experience for food assistance in the political·economic domain; total score of social support, parenting, and cooking skills in the socio-cultural domain. A stepwise multivariate linear regression model showed a negative association between the food insecurity score with social support from family and food inventory status in the last week. After adjusting for confounders, a positive association was obtained between the experience of a food support program. The final regression model explains about 30% of the relationship obtained in the three food environment domains and food insecurity (p < 0.001). Conclusion: Not only economic factors, which are common determinants of household food insecurity, but socio-cultural factors such as social support also affect household food insecurity. Therefore, plans for implementing a food assistance program to improve food insecurity for households with immigrant women should consider financial support as well as other comprehensive aspects, including socio-cultural domain such as social support from family and community.