• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.3
• /
• pp.45-52
• /
• 2009

Power line communication or power line carrier (PLC) is a system for carrying data on a conductor and can also used for electric power transmission. Now the powers used in the motor drive system are mostly DC sources. Even AC powers in some systems are generated from DC sources by the inverter. It is can be forecasted that the DC-link PLC technology will be widely used in various industrial fields. In this paper a novel BLDC motor control system using ASK DC-link PLC technology is proposed. The characteristic of this system is that the communication only needs 2 DC lines and there are no additional lines to translate the reference signals. The number of signal cables can be minimized when the DC-link PLC method is applied in the multi motor control system and the slip ring design also can be simplified when this method is applied in rotation machines. The proposed motor control system is clarified by the PSIM and MATLAB simulations and tested through the hardware prototype.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.74.1-74.1
• /
• 2012

It is known that the diffuse H${\alpha}$ halos around bright H II regions are more extended than the dust-scattered halos around point sources and the line ratios [S II] ${\lambda}$6716/H${\alpha}$ and [N II] ${\lambda}$6583/H${\alpha}$ observed outside of bright H II regions are generally higher than those in H II regions. These observational facts have been regarded as evidence against the dust-scattering origin of the diffuse H${\alpha}$ emission and the effect of dust-scattering has been neglected in studying the diffuse H${\alpha}$ emission. In this paper, we find, however, that dust-scattered halos of H II regions should be more extended than those of point sources and is in good agreement with the observed H${\alpha}$ profiles around H II regions. We also found that the observed line ratios [S II]/H${\alpha}$, [N II]/H${\alpha}$, and He I ${\lambda}$5876/H${\alpha}$ in the diffuse regions can be well reproduced with the dust-scattered halos around H II regions which are photoionized by late O- and/or early B-type stars in the interstellar medium with the abundances close to those of the warm neutral medium. Therefore, we conclude that the diffuse H${\alpha}$ emission may originate mostly from the dust-scattering.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.625-629
• /
• 2014

This study derives the asymptotic phase noise formula of the oscillators perturbed by the colored noises. Based on the derived formula, this study presents a sub-1V series-tuned differential Colpitts VCO. The ADS simulation result on the phase noise shows that the presented VCO exhibits about 3dBc/Hz lower phase noise at the 1MHz offset frequency from the oscillation frequency of 4.8GHz than the existing series-tuned differential Colpitts VCO with the inductor current sources.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.454-456
• /
• 1987

A more specialized area of transient evaluations is transmission line fault-detecting and protection system. During the first cycle or two following a power system fault, a high-speed protective relay is expected to make a decision as to the severity or location of the fault, usually based on 60 Hz information, i.e. the phase and magnitude of 60 Hz voltage or current signals. It is precisely at this time however that the signal is badly corrupted by noise, in the form of a de offset or frequencies above 50 Hz. One of several possible sources of transients in protection measuring signals is in the primary system for which protection is required in its response to the impact of short circuit fault on-set. Other sources are in the primary voltage and current transducers from which protection signals are derived, and, often of particular importance, in the interface circuits between the transducer secondaries and the comparator and measuring elements of the protection system. However, the noise signals that will be described in this paper are due to the main power system only and do not include errors due to current or voltage transducers.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1244-1249
• /
• 2023

Recently, the Kingdom of Saudi Arabia (KSA) announced the development of first-of-a-kind(FOAK) and most advanced futuristic vertical city and named as 'The LINE'. The project will have zero carbon dioxide emissions and will be powered by clean energy sources. Therefore, a study was designed to understand which clean energy sources might be a better choice. Because of its nearly carbon-free footprint, nuclear energy may be a good choice. Nowadays, the development of very small modular reactors (vSMRs) is gaining attention due to many salient features such as cost efficiency and zero carbon emissions. These reactors are one step down to actual small modular reactors (SMRs) in terms of power and size. SMRs typically have a power range of 20 MWe to 300 MWe, while vSMRs have a power range of 1-20 MWe. Therefore, a study was conducted to discuss different vSMRs in terms of design, technology types, safety features, capabilities, potential, and economics. After conducting the comparative test and analysis, the fuel cycle modeling of optimal and suitable reactor was calculated. Furthermore, the levelized unit cost of electricity for each reactor was compared to determine the most suitable vSMR, which is then compared other generation SMRs to evaluate the cost variations per MWe in terms of size and operation. The main objective of the research was to identify the most cost effective and simple vSMR that can be easily installed and deployed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.1
• /
• pp.81-91
• /
• 2012

Presently in 2011, there are countless attacking tools oriented to invading security on the internet. And most of the tools are possible to conduct the actual invasion. Also, as the program sources attacking the weaknesses of PS3 were released in 2010 and also various sources for attacking agents and attacking tools such as Stuxnet Source Code were released in 2011, the part for defense has the greatest burden; however, it can be also a chance for the defensive part to suggest and develop methods to defense identical or similar patterned attacking by analyzing attacking sources. As a way to cope with such attacking, this study divides the network areas targeted for attack based on load balancing by the approach gateways and communication lines according to the defensive policies by attacking types and also suggests methods to multiply communication lines. The result of this paper will be provided as practical data to realize defensive policies based on high hardware performances through enhancing the price competitiveness of hardware infrastructure with 2010 as a start.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.127-128
• /
• 2006

The noise is major obstacle element in power line communication. However, because power supply networks are not designed for communication, there are various noise sources. Accordingly, a study of characteristic and cause of noise generated in low voltage transformer is important for outdoor power line communication. In this paper, we measure low voltage transformer noise in 1-30MHz using spectrum analyzer. We analyze cause and pattern of noise considering partial discharge.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.1 no.1
• /
• pp.20-27
• /
• 1990

This paper presents an efficient method to estimate the induced current by the external electromagnetic wave when the line system is composed of cascaded transmission lines. To solve this phenomena, we apply the state variable method to the nonhomogeneous differential equation. This new method is the way of transferring the sources at a different point by the Ch- aracteristics of the transition matrix. Using this method, we investigate the characteristics of the induced power of the transmission line above the perfectly conducting ground plane.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.7
• /
• pp.532-538
• /
• 2003

This paper studies on the noise reduction for a small automobile DC Motor (a window motor) using the 6 sigma process. The application of 6 sigma process suggested reliable and valuable statistical data for the quality of the DC motor at the production line. In the measurement step in 6 sigma process. the FMEA(failure mode effect analysis) were used for the detection of noise sources. The application of 6 sigma Process gave not only the improving method for the quality of the DC motor but also the confidence of improvement Itself since it was done on the basis of the test results for a number of DC motors at the production line. Consequently the 6 sigma process was proved very effective for the noise reduction at the production line.

• Journal of Korean Society of Steel Construction
• /
• v.8 no.3 s.28
• /
• pp.97-105
• /
• 1996

A Stochastic line source model is developed to simulate the seismic wave field generated during the rupture propagation process along a fault plane of which length is much larger than its width. The fault plane is assumed to consist of randomly distributed slip zones and barriers and each slip zone is modeled as a point source. By combining the newly developed source model with wave propagation analysis method in a layered 3-D visco-elastic half space, synthetic seismograms are obtained. The calculated accelerograms due to vertical dip slip and strike slip line sources are presented.