• Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.24.1-24.6
• /
• 2016

We determined the optimum dietary protein level in juvenile barred knifejaw Oplegnathus fasciatus in cages. Five semi-purified isocaloric diets were formulated with white fish meal and casein-based diets to contain 35, 40, 45, 50, and 60 % crude protein (CP). Fish with an initial body weight of $7.1{\pm}0.06g$ ($mean{\pm}SD$) were randomly distributed into 15 net cages (each size: $60cm{\times}40cm{\times}90cm$, $W{\times}L{\times}H$) as groups of 20 fish in triplicates. The fish were fed at apparent satiation level twice a day. After 8 weeks of feeding, the weight gain (WG) of fish fed 45, 50, and 60 % CP diets were significantly higher than those of fish fed 35 and 40 % CP diets. However, there were no significant differences in WG among fish fed 45, 50, and 60 % CP diets. Generally, feed efficiency (FE) and specific growth rate (SGR) showed a similar trend as WG. However, the protein efficiency ratio (PER) was inversely related to dietary protein levels. Energy retention efficiency increased with the increase of dietary protein levels by protein sparing from non-protein energy sources. Blood hematocrit content was not affected by dietary protein levels. However, a significantly lower amount of hemoglobin was found in fish fed 35 % CP than in fish fed 40, 45, 50, and 60 % CP diets. Fish fed 60 % CP showed the lowest survival rate than the fish fed 35, 40, 45, and 50 % CP diets. Broken-line analysis of WG showed the optimum dietary protein level was 45.2 % with 18.8 kJ/g diet for juvenile barred knifejaw. This study has potential implication for the successful cage culture of barred knifejaw.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.252-262
• /
• 2014

Sorghum seed is traditionally used as secondary food sources in addition to rice in Korea. While the hypoglycemia regulating phytochemicals have been found in sorghum seed, peptides related with hypoglycemia never been studied before. To obtain the peptide characteristics and the specifically high-expressed peptides in hypoglycemic sorghum seed, peptide profiles of seven hypoglycemic and five non-hypoglycemic sorghum lines bred in RDA were determined using surface-enhanced laser desorption/ionization time-of-flight mass spectrometry (SELDI-TOF MS). The twelve sorghum lines exhibited 104 peptides on CM10 protein chip array (weak cation exchange) and 95 peptides on Q10 (weak cation exchange) in the molecular mass range from 2,000 to 20,000 Da. Heat map via supervised hierarchical clustering of the significantly different peptides (p < 0.01) in peak intensity among the 12 lines effectively revealed the specifically upregulated peptides in each line and distinguished between 7 hypoglycemic and 5 non-hypoglycemic lines. Through the comparison with hypoglycemic and non-hypoglycemic lines, 10 peptides including 2231.6, 2845.4, 2907.9, 3063.5, 3132.6, 3520.8, 4078.8, 5066.2, 5296.5, 5375.5 Da were specifically high-expressed in hypoglycemic lines at p < 0.00001. This study characterized seed peptides of 12 sorghums and found ten peptides highly expressed for hypoglycemic sorghum lines, which could be used as peptide biomarkers for identification of hypoglycemic sorghum.

• Korean journal of food and cookery science
• /
• v.15 no.2
• /
• pp.108-113
• /
• 1999

Natural products derived from not only medicinal but edible plants have been used as sources of folk remedies and other useful materials, like as appetizers, health supplements and food additives. A short-term in vitro biomarker assay was accompilshed to assess cytotoxic activity on the human lung and ovary adeno cancer cell lines based on sulforhodamine B (SRB) method. As a result, the EtOAc soluble fractions from Trichosanthes kirilowii Max. and Dioscorea japonica Thunb. showed potent cytotoxicity as a below 30% of growth ratio of cancer cell at a concentration of 40 $\mu\textrm{g}$/ml on lung and ovary adeno cancer cell lines, and lung cancer cell line, respectively. Cytotoxic activity present in plant extracts appear to be promising candidates as functional foods among Korean wild edible plants, and further studies are warranted.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1269-1275
• /
• 2017

Tenebrio molitor samples were investigated as novel biomaterials and sources of food in several recent studies. However, the insects' effects on hair growth were not sufficiently researched. To develop novel and natural materials for preventing alopecia and promoting hair growth, this study investigated the antioxidant activities and hair-growth promotion effects of TMEs. To determine the antioxidant activities, the TMEs' DPPH radical- and nitrite-scavenging activities were examined. To determine hair-growth promotion effects, proliferations of human dermal papilla cells (DPCs) and the murine fibroblast cell line NIH3T3 were evaluated by using an MTS assay. In addition, estimations were made for cell viabilities against cell death induced by dihydrotesterone (DHT) in DPCs and inhibitory effects against potassium channel blocking induced by tolbutamide (TBM) in NIH3T3 cells. The DPPH radical scavenging activity was 81.17%, and the nitrite scavenging activity was 43.69%; the activities were similar to the activities of blueberry extracts. Moreover, the TMEs promoted the proliferation of human DPCs and NIH3T3 cells, which were concentrated dependently. The TMEs prevented not only DHT-induced DPC cytotoxicity but also TBM's action as a potassium channel blocker in NIH3T3 cells. The results suggested that TME could be used as a functional therapeutic alopecia reagent, to prevent hair loss and to promote hair growth.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.171-178
• /
• 2010

Pipeline structure is one of core underground infrastructure which transports primary sources. Since the almost pipeline structures are placed underground and connected each other complexly, it is difficult to monitor their structural health condition continuously. In order to overcome this limitation of recent monitoring technique, recently, a Ubiquitous Sensor Network (USN) system based on on-line and real-time monitoring system is being developed by the authors' research group. In this study, real-time pipeline health monitoring (PHM) methodology is presented based on electromechanical impedance methods using USN. Two types of damages including loosened bolts and notches are artificially inflicted on the pipeline structures, PZT and MFC sensors that have piezoelectric characteristics are employed to detect these damages. For objective evaluation of pipeline conditions, Damage metric such as Root Mean Square Deviation (RMSD) value was computed from the impedance signals to quantify the level of the damage. Optimal threshold levels for decision making are estimated by generalized extreme value(GEV) based statistical method. Throughout a series of experimental studies, it was reviewed the effectiveness and robustness of proposed PHM system.

• Korean Journal of Materials Research
• /
• v.10 no.12
• /
• pp.812-818
• /
• 2000

We studied the effects of Ge preamorphization (PAM) on 0.25$\mu\textrm{m}$ Ti-salicide junctions using comparative study with As PAM. For each PAM schemes, ion implantations are performed at a dose of 2E14 ion/$\textrm{cm}^2$ and at 20keV energy using $^{75}$ /As+and GeF4 ion sources. Ge PAM showed better sheet resistance and within- wafer uniformity than those of As PAM at 0.257m line width of n +/p-well junctions. This attributes to enhanced C54-silicidation reaction and strong (040) preferred orientation of the C54-silicide due to minimized As presence at n+ junctions. At p+ junctions, comparable performance was obtained in Rs reduction at fine lines from both As and Ge PAM schemes. Junction leakage current (JLC) revels are below ~1E-14 A/$\mu\textrm{m}^{2}$ at area patterns for all process conditions, whereas no degradation in JLC is shown under Ge PAM condition even at edge- intensive patterns. Smooth $TiSi_2$ interface is observed by cross- section TEM (X- TEM), which supports minimized silicide agglomeration due to Ge PAM and low level of JLC. Both junction break- down voltage (JBV) and contact resistances are satisfactory at all process conditions.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.629-637
• /
• 2016

In this paper, an investigation was conducted to evaluate the acoustic performance of low height noise barriers installed adjacent to rails; an easy-to-use approximation formula was suggested for the evaluation of insertion loss (IL), instead of using the boundary element method. At first, the acoustic performance of the low height noise barriers was measured in an anechoic chamber using a scaled down model; the overall IL according to the source location was analyzed with the equivalent IL contour line. Using the measurement results obtained from the scaled down model, an approximation formula was suggested for the IL of low height noise barriers having various shapes. Also, the prediction program was validated through a comparison between the actual measurement results in the anechoic chamber and the prediction results. Finally, using the prediction program, an approximation formula for IL was suggested for the low height noise absorption barriers. Considering the frequency characteristics of the noise sources of the train, the absorptive low height noise barriers have a 'ㄱ' type shape, a height of 1.0m, and a length of 0.5m when they are installed on the structure gauge for the train.

• Spatial Information Research
• /
• v.21 no.6
• /
• pp.91-98
• /
• 2013

Government introduces a Total Maximum Daily Loads(TMDL) which can be implemented for total pollutant amounts in 2004. Normally, the local governments have been calculated the amounts of pollutant discharge of each watershed using a water quality model. However, among the input data to use the water quality model, creating a schematic diagram of the stream or the modeling usually requires considerable amount of time and efforts due to the manual work. Therefore, this study tried to develop an algorithm which automates the creation of a schematic diagram for water quality modeling using the Korean Reach File capable of river network analysis. Further, this study creates a schematic diagram with the shape of a stream utilizing GIS capabilities. The diagram can be easily analyzed with overlapping various spatial information such as pollution sources and discharge points. This study mainly has automated element segmentation algorithm to divide streamflows into equal distance using line graphic data of Koran Reach File. Also, automated attribute input algorithm has also been developed to enable to insert element order and type into elements using point graphic data of Korean Reach File. For the verification of the developed algorithm, the algorithm was applied to kyungan stream basin to see the acceptable results. To conclude, it was possible to automate generating of schematic diagram of water quality model and it is expected to be able to save time and cost required for the water modeling. In future study, it is necessary to develop an automatic creation system of various types of input data for water quality modeling and this will lead to relatively easier and simple water quality modeling.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.19-30
• /
• 2012

For digital data compression, the quantization is the main part of the lossy source coding. In order to improve the performance of quantization, the vector quantizer(VQ) can be employed. The encoding complexity, however, exponentially increases as the vector dimension or bit rate gets large. Much research has been conducted to alleviate such problems of VQ. Especially for high bit rates, a constrained VQ, which is called the sample-adaptive product quantizer(SAPQ), has been proposed for reducing the hugh encoding complexity of regular VQs. SAPQ has very similar structure as to the product VQ(PQ). However, the quantizer performance can be better than the PQ case. Further, the encoding complexity and the memory requirement for the codebooks are lower than the regular full-search VQ case. Among SAPQs, 1-SAPQ has a simple quantizer structure, where each product codebook is symmetric with respect to the diagonal line in the underlying vector space. It is known that 1-SAPQ shows a good performance for i.i.d. sources. In this paper, a study on designing 1-SAPQ for the first-order Markov process. For an efficient design of 1-SAPQ, an algorithm for the initial codebook is proposed, and through the numerical analysis it is shown that 1-SAPQ shows better quantizer distortion than the VQ case, of which encoding complexity is similar to that of 1-SAPQ, and shows distortions, which are close to that of the DPCM(differential pulse coded modulation) scheme with the Lloyd-Max quantizer.

• Steel and Composite Structures
• /
• v.1 no.4
• /
• pp.459-480
• /
• 2001

The damage suffered by steel structures during the Northridge (1994) and Kobe (1995) earthquakes indicates that the fully restrained (FR) connections in steel frames did not behave as expected. Consequently, researchers began studying other possibilities, including making the connections more flexible, to reduce the risk of damage from seismic loading. Recent experimental and analytical investigations pointed out that the seismic response of steel frames with partially restrained (PR) connections might be superior to that of similar frames with FR connections since the energy dissipation at PR connections could be significant. This beneficial effect has not yet been fully quantified analytically. Thus, the dissipation of energy at PR connections needs to be considered in analytical evaluations, in addition to the dissipation of energy due to viscous damping and at plastic hinges (if they form). An algorithm is developed and verified by the authors to estimate the nonlinear time-domain dynamic response of steel frames with PR connections. The verified algorithm is then used to quantify the major sources of energy dissipation and their effect on the overall structural response in terms of the maximum base shear and the maximum top displacement. The results indicate that the dissipation of energy at PR connections is comparable to that dissipated by viscous damping and at plastic hinges. In general, the maximum total base shear significantly increases with an increase in the connection stiffness. On the other hand, the maximum top lateral displacement $U_{max}$ does not always increase as the connection stiffness decreases. Energy dissipation is considerably influenced by the stiffness of a connection, defined in terms of the T ratio, i.e., the ratio of the moment the connection would have to carry according to beam line theory (Disque 1964) and the fixed end moment of the girder. A connection with a T ratio of at least 0.9 is considered to be fully restrained. The energy dissipation behavior may be quite different for a frame with FR connections with a T ratio of 1.0 compared to when the T ratio is 0.9. Thus, for nonlinear seismic analysis, a T ratio of at least 0.9 should not be considered to be an FR connection. The study quantitatively confirms the general observations made in experimental results for frames with PR connections. Proper consideration of the PR connection stiffness and other dynamic properties are essential to predict dynamic behavior, no matter how difficult the analysis procedure becomes. Any simplified approach may need to be calibrated using this type of detailed analytical study.