• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.339-350
• /
• 2018

The rail wear measurements in urban underground railway have been analyzed to predict the particulate matter emission caused by rail wear which is one of the major sources of particulate matter emission for underground railway systems. From the rail profile variations measured in the interval of one and half year by dedicated rail wear measuring instrument over the commercial urban underground railway line, 'line-s' which is about 45km long, the characteristics as well as the amount of rail wear have been analyzed after dividing the whole line into about 170 section with radius of curve(R). It has been concluded that the vertical wear parameter V0 and corner wear parameter C0 have been selected to represent the wear amount of straight and curved rail respectively. The amount of rail wear as well as the particulate matter emission by rail wear over the whole line normalized by the rail length as well as the number of train has also been deduced from the relationship between the rail wear parameters and the amount of rail cross-section area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.9C
• /
• pp.829-835
• /
• 2002

DSL(digital subscriber line) transceiver designers have concerned the impulsive noise as well as NEXT(near-end crosstalk) and FEXT(far-end crosstalk) immunities Down as the strongest sources that limit the DSL channel capacity. In these noise environment the analysis on the performance of DSL should be needed. Therefore, in this paper we have estimated and simulated the SNR(signal-to-noise ratio) margin of DMT(discrete multi-tone) signal in Gauss, NEXT, FEXT and impulse noise environment by modeling an Middleton's Class A impulse signal with the test Cook pulses. As a result, it is known that the transmission rate of uplink is limited by noise characteristics rather than by loop length, but that of downlink limited complexly by both of noise characteristics and loop length. In conclusion, these results will be utilized as the threshold of ADSL performance in the complex noise environment including impulse noise.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.15-19
• /
• 2001

This paper presents an modelling and analysis of SSSC and UPFC in static analysis of power systems. SSSC is used to control active power flow in transmission lines by controlling the phase angle of the injected voltage source which is in rectangular to the line current. UPEC is used to control the magnitude and phase of the injected voltage sources which are connected both in series and in parallel with the transmission line to control power flow and bus voltage. To compare the effect of SSSC and UPFC in power system static analysis, the PSS/E simulation program is used. As the FACTS device model such as SSSC and UPFC is not provided in PSS/E yet, an equivalent load model is used. This procedure is implemented by IPLAN which is an external macro program of PSS/E. The simulation results show that UPFC is more effective to improve bus voltage than SSSC in power system static analysis.

• Korean Journal of Pharmacognosy
• /
• v.39 no.4
• /
• pp.335-340
• /
• 2008

Diabetes mellitus is metabolic disorder characterized by hyperglycemia caused by insufficient insulin secretion or insulin receptor insensitivity to endogenous insulin. It is well-known that hyperglycemia is one of the main causes of oxidative stress in both type 1 and 2 diabetes. Oxidative stress is related by death of pancreatic ${\beta}$ cell and dysfunction of ${\beta}$ cell. Although ${\beta}$ cell death or dysfunction is induced by many substances or molecules, increased evidences that oxidative stress plays a crucial role in ${\beta}$ cell death or dysfunction. Considering the importance of oxidative stress in the pathogenesis of diabetes mellitus, we investigated the cytoprotective effects against hydrogen peroxide-induced oxidative stress in pancreatic ${\beta}$ cell line RIN-m5F cell. 110 Plant sources were collected in Mt. Baek-du, and extracted with methanol. These extracts had been screened the protective effects against hydrogen peroxide-induced oxidative damage in RIN-m5F cells at 50 and 200 ${\mu}g$/ml. Of these, ten methanolic extracts, aerial part of Erigenron cannadensis, aerial part of Lespedeza juncea, whole plant of Alopecurus aequalis, fruit of Lycium chinense, leaf of Morus alba, rhizome of Polygonatum odoratum, root of Ampelosis japonica, whole plant of Ranunculus japonicus, aerial part of Polygonum sieboldii, rhizome of Arisaema amurense var. violaceum showed significant protective effects against hydrogen peroxide-induced oxidative damage in pancreatic ${\beta}$ cell line RIN-m5F cell.

• Journal of Korea Multimedia Society
• /
• v.16 no.11
• /
• pp.1272-1280
• /
• 2013

In this paper, we propose an audio surveillance system which can detect and localize dangerous sounds in real-time. The location information about dangerous sounds can render a PTZ camera to be directed so as to catch a snapshot image about the dangerous sound source area and send it to clients instantly. The proposed audio surveillance system firstly detects foreground sounds based on adaptive Gaussian mixture background sound model, and classifies it into one of pre-trained classes of foreground dangerous sounds. For detected dangerous sounds, a sound source localization algorithm based on Dual delay-line algorithm is applied to localize the sound sources. Finally, the proposed system renders a PTZ camera to be oriented towards the dangerous sound source region, and take a snapshot against over the sound source region. Experiment results show that the proposed system can detect foreground dangerous sounds stably and classifies the detected foreground dangerous sounds into correct classes with a precision of 79% while the sound source localization can estimate orientation of the sound source with acceptably small error.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.539-553
• /
• 2004

Up to the present time, many methods to estimate emissions from a particular diesel engines have wholly depended on the quantity of diesel fuel consumed. Then, the recommended emission factors were normalized by fuel consumption, and further total activity was estimated by the total fuel consumed. One of main purposes in the study is newly to develop emission factors for the railroad diesel rolling stock (RDRS) and to estimate a total amount of major gaseous pollutants from the RDRS in Korea. Prior to develop a Korean mode emission factor. the emission factor from the USEPA was simply applied for comparative studies. When applying the USEPA emission factors, total exhaust emissions from the RDRS in Korea were estimated by 28,117tons of NOx, 2,832.3tons of CO, and 1,237.5tons of HC, etc in 2001. In this study, a emission factor for the RDRS, so called the KoRail mode (the Korean Railroad mode) has been developed on the basis of analyzing the driving pattern of the Gyeongbu-Line especially for the line-haul mode. Explicitly to make the site specific emission factors, many uncertainty problems concerning weighting factors for each power mode, limited emission test, incomplete data for RDRS, and other important input parameters were extensively examined. Total exhaust emissions by KoRail mode in Korea were estimated by 10,960tons of NOx, and 4,622tons of CO, and so on in the year of 2001. The emissions estimated by the USEPA mode were 2.6 times higher for NOx, and 1.6 times lower for CO than those by the KoRail mode. As a conclusion, based on the emission calculated from both the USEPA mode and the KoRail mode, the RDRS is considered as one of the significant mobile sources for major gaseous pollutants and thus management plans an(1 control strategies for the RDRS must be established to improve air quality near future in Korea.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.9
• /
• pp.433-440
• /
• 2002

The addition of switches to a distribution feeder does, in general, increase reliability by decreasing the duration of the outage of many to the customers on the feeder. To cover its service area so that feeder-level delivery reaches sufficiently close to all customers, feeders typically split their routes many times, in what is often called a lateral feeder. It is interesting to note, however, that the effectiveness of a switch is very much dependent on the types of lateral feeder. The types of lateral are classified into two types. The first is loop lateral feeder that can connect its load to an adjacent feeder through a tie line in case that a fault occurs in its feeder and it is laid out so that every feeder has complete fault backup through re-switching of its loads to other sources like a main feeder The second is the radial lateral feeder cannot connect its load to an adjacent line, no provision is made for contingency backup of feeders. There are no other circuits in the radial lateral feeder form which to restore power. In this study, we evaluate the effectiveness of a switch installation between on the radial and loop lateral feeders to increase reliability by decreasing the duration of the outage. These results can help power utility to design the switch layouts on the radial and loop lateral feeder system.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.34.1-34.1
• /
• 2016

The ultra hard X-ray band (14-195 keV) provides an important and unbiased way to understand black hole growth and relationship to the host galaxy. The Burst Alert Telescope (BAT) instrument on the Swift satellite has surveyed sky to unprecedented sensitivity, improving the number of known hard X-ray sources by more than a factor of 20 to 836 nearby AGN. The BAT AGN Spectroscopic Survey (BASS) is a study for the first large (N>600) and complete sample of ultra hard X-ray selected AGN with optical spectroscopy. In this talk, I present the observed relationship between black hole mass, bolometric luminosity, and Eddington ratio with optical emission line ratios. We show that [NII]/Ha ratio exhibits a significant correlation with Eddington ratio. We propose that the [NII]/Ha ratio is a useful indicator of Eddington ratio with 0.6 dex of scatter, and that it can be used to measure Eddington ratio and thus black hole mass from the measured bolometric luminosity, even for high redshift obscured AGN.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.551-560
• /
• 2008

The basic strategy of OSMU(One-source Multi-use) in digital image is a marketing that applying one source to other genres for leverage based on that cross-referencing in different genre enabled that one material(one-source) has synergy effect when reproduced to various products(multi-use) as cultural sources are available through on-line and digital format. Recently, according to the characteristics of culture industry with Window Effect, many culture contents such as movies, games, animations and characters are carefully planned at its design stage to get the maximum effect. Especially, the fact that one leading-trend source makes it easier to produce additional products with the least cost is observed and it enables organized management which resulted in low marketing and PR cost. This paper confirmed that OSMU strategy in Korea mainly get started from online to offline comparing to Japan and USA.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.163-177
• /
• 1996

An investigation on thermohydraulic stability of flow oscillations in the CANada Deuterium Uranium-600(CANDU-6) heat transport system has been conducted. Flow oscillations in reactor coolant loops, comprising two heat sources and two heat sinks in series, are possibly caused by the response of the pressure to extraction of fluid in two-phase region. This response consists of two contributions, one arising from mass and another from enthalpy change in the two-phase region. The system computer code used in the investigation os SOPHT, which is capable of simulating steady states as well as transients with varying boundary conditions. The model was derived by linearizing and solving one-dimensional, homogeneous single- and two-phase flow conservation equations. The mass, energy and momentum equations with boundary conditions are set up throughout the system in matrix form based on a node-link structure. Loop stability was studied under full power conditions with interconnecting the two compressible two phase regions in the figure-of-eight circuit. The dominant function of the interconnecting pipe is the transfer of mass between the two-phase regions. Parametric survey of loop stability characteristics, i. e., damping ratio and period, has been made as a function of geometrical parameters of the interconnection line such as diameter, length, height and orifice flow coefficient. The stability characteristics with interconnection line has been clarified to provide a simple criterion to be used as a guide in scaling of the pipe.