활성탄에 의한 프로피네브 농약의 흡착특성을 초기농도, 접촉시간과 온도를 고려한 회분식 실험을 통해 조사하였다. Langmuir 식과 Freundlich 식을 사용하여 흡착등온선과 상수값을 구하였다. 흡착평형관계는 Freundlich 등온식이 잘 맞았으며, 흡착등온선의 기울기 값으로부터 활성탄에 의한 프로피네브의 효과적인 처리가 가능하다는 것을 알 수 있었다. 유사일차반응속도식과 유사이차반응속도식을 사용하여 동력학적 실험값을 평가한 결과, 유사이차반응속도식이 더 잘 맞았으며, 속도상수 ($k_2$) 값은 프로피네브의 초기농도가 증가할수록 감소하였다. 활성화에너지, 표준엔탈피, 표준엔트로피 및 표준자유에너지를 평가하였는데, 조사된 표준자유에너지값은 298, 308 및 318 K에서 각각 -7.28, -8.27 및 -11.66 kJ/mol로 나타나 흡착공정이 자발적임을 알 수 있었다. 엔탈피변화량은 54.46 kJ/mol 로 양의 값을 나타내어 활성탄에 대한 프로피네브의 흡착이 흡열반응으로 일어난다는 것을 알 수 있었다.
본 연구에서는 소양강댐 유역의 수문기상인자들의 시공간적 변동성을 명확히 파악하기 위하여 지표해석모형을 구축하였다. 지표해석 모형으로는 Variable Infiltration Capacity (VIC) 모형을 사용하였으며, 모형의 공간 해상도는 10 km, 시간 해상도는 1일로 정하였다. 2007~2010년 기간의 일유량자료를 바탕으로 Isolated Particle Swarm Optimization 알고리즘을 사용하여 모형의 7개 매개변수를 보정하였고, 2011~2014년 기간의 일유량자료를 사용하여 모형을 검증하였다. 보정된 모형은 보정기간과 검증기간 모두에 대하여 0.90의 Nash-Sutcliffe Coefficient값과 0.95의 상관계수를 보였다. 소양강댐유역에 대하여 산출된 인자들은 여름철에 강우가 집중되어있는 우리나라의 계절적인 특성과 기온변화로 인한 장 단파 복사량의 변화와, 지표면 온도의 변화, 이로 인해 피복층에서의 증발과 식생 증산의 변화가 고려되어 총 증발산이 변화하는 경향이 잘 반영된 것으로 나타났다. 산출된 수문인자를 검증하기 위하여 지상관측토양수분자료와 비교하였다. 겨울철을 제외한 4~11월의 비교결과 두 자료의 추세선의 기울기는 1.087로 나타났고, 상관계수는 0.723의 값을 나타냈다. 이러한 본 연구의 결과는 지표해석모형이 우리나라 주요 댐 유역의 수문기상인자의 시공간적인 변화를 정확히 파악하는데 활용될 수 있으며, 나아가서는 더욱 정밀하고 효율적인 수자원계획을 수립하는 데에도 활용될 수 있다는 점을 시사한다.
본 연구에서는 유역 집중시간과 저류상수의 이론적 배경을 바탕으로 적절한 경험식의 형태를 제시하고 기존의 경험식의 형태와 비교 평가하였다. 추가로, 제시된 경험식의 형태를 이용하여 충주댐 유역의 집중시간 및 저류상수의 경험식을 유도하고, 유도된 경험식과 기존의 경험식들을 비교하였다. 그 결과를 정리하면 다음과 같다. (1) 유역의 집중시간에 대한 경험공식의 형태는 유로연장의 제곱에 비례하고 유로경사에 반비례하는 형태로 나타난다. (2) 저류상수는 집중시간에 비례하는 형태로 나타난다. (3) 기존 매개변수에 관한 경험식을 검토한 결과, 집중시간의 경우에는 Kirpich 공식, Kraven (I) 공식, Kraven (II) 공식, California DoT 공식, Kerby 공식, SCS 공식 및 Morgali and Linsley 공식 등이 이러한 이론적 배경을 잘 따르고 있는 것으로 나타난다. 저류상수의 경우, Clark 공식, Russell 공식, Sabol 공식 및 정성원 공식 등이 본 저류상수와 집중시간의 비례관계를 매우 잘 만족하는 것으로 나타난다. (4) 기존의 경험식을 충주댐 유역에 적용한 결과, 집중시간의 경험식 중 정성원 공식, 윤태훈 등 공식, Kraven (I) 공식 및 Kraven (II) 공식은 추정한 집중시간과 비교적 유사한 결과를 보였으나, Rziha 공식은 비정상적인 결과를 나타내는 것으로 나타났다. 저류상수의 경우에는 윤석영과 홍일표 공식, 정성원 공식, 이정식 등 공식 및 윤태훈 등 공식이 어느 정도 합리적인 결과를 보인 반면, Sabol 공식의 경우에는 비정상적인 결과가 유도되었다. 결론적으로 국내의 집중시간 및 저류상수에 대한 경험공식이 국내 유역의 특성을 잘 반영하는 것으로 나타났다.
The major objective of this study was to develop further understanding of 3D nearshore hydrodynamics under a variety of wave and tidal forcing conditions. The main tool used was a comprehensive 3D numerical model - combining the flow module of Delft3D with the WAVE solver of XBeach - of nearshore hydro- and morphodynamics that can simulate flow, sediment transport, and morphological evolution. Surf-swash zone hydrodynamics were modeled using the 3D Navier-Stokes equations, combined with various turbulence models (${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES). Sediment transport and resulting foreshore profile changes were approximated using different sediment transport relations that consider both bed- and suspended-load transport of non-cohesive sediments. The numerical set-up was tested against field data, with good agreement found. Different numerical experiments under a range of bed characteristics and incident wave and tidal conditions were run to test the model's capability to reproduce 3D flow, wave propagation, sediment transport and morphodynamics in the nearshore at the field scale. The results were interpreted according to existing understanding of surf and swash zone processes. Our numerical experiments confirm that the angle between the crest line of the approaching wave and the shoreline defines the direction and strength of the longshore current, while the longshore current velocity varies across the nearshore zone. The model simulates the undertow, hydraulic cell and rip-current patterns generated by radiation stresses and longshore variability in wave heights. Numerical results show that a non-uniform seabed is crucial for generation of rip currents in the nearshore (when bed slope is uniform, rips are not generated). Increasing the wave height increases the peaks of eddy viscosity and TKE (turbulent kinetic energy), while increasing the tidal amplitude reduces these peaks. Wave and tide interaction has most striking effects on the foreshore profile with the formation of the intertidal bar. High values of eddy viscosity, TKE and wave set-up are spread offshore for coarser grain sizes. Beach profile steepness modifies the nearshore circulation pattern, significantly enhancing the vertical component of the flow. The local recirculation within the longshore current in the inshore region causes a transient offshore shift and strengthening of the longshore current. Overall, the analysis shows that, with reasonable hypotheses, it is possible to simulate the nearshore hydrodynamics subjected to oceanic forcing, consistent with existing understanding of this area. Part II of this work presents 3D nearshore morphodynamics induced by the tides and waves.
임자도 대광사구의 현존상관식생은 해안 방풍림으로 조성된 곰솔군락이 가장 넓게 분포하고 아까시나무군락, 갯그령군락, 띠-갯그령군락, 통보리사초군락, 갯쇠보리군락, 띠군락, 갈대군락, 띠-산조풀군락이 띠모양 또는 파편화로 분포하였다. 조사지점 74개소에 대해 식물사회학적 방법으로 자료를 수집 및 분석한 결과, 대광사구식생의 종조성은 7개군락, 5개군으로 총 10개 식생단위로 유형화되었다. 7개 군락은 곰솔군락, 갯그령군락, 아까시나무군락, 해당화군락, 갯쇠보리군락, 통보리사초군락, 산조풀군락으로 구분되었으며, 곰솔군락의 하위단위로 고사리군, 갯그령군, 곰솔전형군의 3개군과 산조풀군락의 하위단위로 갈대군, 산조풀전형군의 2개군으로 구분되었다. 종의 해안선으로부터 대상분포는 갯그령 - 통보리사초, 좀보리사초 - 갯완두 - 갯메꽃 - 순비기나무, 갯완두, 갯쇠보리 - 해당화 순으로 나타났다. 종단면을 분석한 결과, 전사구의 초본식생의 폭이 넓고, 전사구 전면부의 경사가 완만하며, 사구열이 많고, 구조물이 없는 유형이 사구의 침식에 덜 취약하고, 회복에 유리한 것으로 나타났다.
The basic principles in the design of Class II amalgam cavity preparations have been modified but not changed in essence over the last 90 years. The early essential principle was "extension for prevention". Most of the modifications have served to reduce the extent of preparation and, thus, increase the conservation of sound tooth structure. A more recent concept relating to conservative Class II cavity preparations involves elimination of occlusal preparation if no carious lesion exists in this area. To evaluate the ideal ClassII cavity preparation design, if carious lesion exists only in the interproximal area, three cavity design conditions were studied: Rodda's conventional cavity, simple proximal box cavity and proximal box cavity with retention grooves. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method. Linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B option, Gap option and R option model) were developed. B option model was assumed perfect bonding between the restoration and cavty wall. Gap option model(Gap distance: $2{\mu}m$) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). R option model was assumed non-connection between the restoration and cavty wall. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as followed. 1. Rodda's cavity form model showed greater amount of displacement with other two models. 2. The stress and strain were increased on the distal marginal ridge and buccopulpal line angle in Rodda's cavity form model. 3. The stress and strain were increased on the central groove and a part of distal marginal ridge in simple proximal box model and proximal box model with retention grooves. 4. With Gap option, Rodda's cavity form model showed the greatest amount of the stress on distal marginal ridge followed by proximal box model with retention grooves and simple proximal box model in descending order. 5. With Gap option, simple proximal box model showed greater amount of stress on the central groove with proximal box model with retention grooves. 6. Retention grooves in the proximal box played the role of supporting the restorations opposing to loads.
열처리에 의한 식품의 성분변화를 줄이기 위한 비열처리 공법 중 하나로 새롭게 주목받고 있는 초고압처리를 적용하여 새우젓의 저장성을 증진시키고자 하였다. 염농도를 달리하여 $20^{\circ}C$에서 6주간 발효시켜 제조한 새우젓의 미생물 수는 염농도 18%에서 가장 높은 미생물 수를 보였으며 일반세균 수는 $3.4{\times}10^5\;CFU/g$, 호염성 세균 수는 $6.4{\times}10^4\;CFU/g$, 효모 수는 $4.2{\times}10^5\;CFU/g$, 호염성 효모 수는 $3.0{\times}10^4\;CFU/g$이었다. 새우젓을 초고압 살균시 압력과 처리시간이 증가할수록 살균효과가 증가되었으며 사멸패턴은 1차반응으로 확인되었다. 염농도 8%와 18% 새우젓에서 $k_p$값은 호염성 세균이 일반세균에 비하여 낮은 값을 보였다. 또한 처리압력에 따라 $log(k_p)$는 직선적으로 증가하였으며 회귀직선의 기울기는 일반세균보다 호염성 세균이 큰 기울기 값을 보여 호염성 세균의 압력에 의한 사멸속도상수의 변화가 일반세균에 비하여 큰 것으로 나타났다. 초고압 공정은 저염발효 새우젓의 살균에 응용될 수 있었으며 최적 처리조건은 6,500기압에서 10분간 처리하는 것이었다.
GIS를 응용하여 2000년 4월 7일 강원도 삼척시 근덕면에서 발생한 산불을 대상으로 진화당일인 15일까지 9일 동안 12시간 간격으로 산불확산속도를 분석하였다. 또한 지형, 임상분포, 기상, 산불 진행 경계 등 산불확산인자를 데이터베이스로 구축하여 다중회귀분석에 의해 산불확산식을 도출하고자, 일별 산불확산 패턴을 추정하였다. 연구결과 산불 발생 첫날인 4월 7일 10시에서 12시 사이의 거리 평균 확산속도는 12.3m/min로 가장 빠르게 확산한 것으로 나타났으며, 그 후 확산속도는 다소의 변화를 거치면서 점차 낮아져 1m/min 이하까지 내려갔고, 결국 15일 최종 진화되었다. 산불 경계에 의해 영향을 받는 일별 산불확산면적은 전 후반기 산불확산 속도가 각각 2.84m/min, 1.10m/min으로 나타난 11일 약 5,700ha까지 올라 간 것으로 추정된다. 그리고 이 산불의 확산속도는 경사향, 풍속, 소나무 임상 분포비율에 의해 주된 영향을 받은 것으로 나타났다.
(1) The flow data of f (stress) and ${\dot{s}$ (strain rate) for Fe and Ti alloys were plotted in the form of f vs. -ln ${\dot{s}$ by using the literature values. (2) The plot showed two distinct patterns A and B; Pattern A is a straight line with a negative slope, and Pattern B is a curve of concave upward. (3) According to Kim and Ree's generalized theory of plastic deformation, pattern A & B belong to Case 1 and 2, respectively; in Case 1, only one kind of flow units acts in the deformation, and in Case 2, two kinds flow units act, and stress is expressed by $f={X_1f_1}+{X_2f_2}$where $f_1\;and\;f_2$ are the stresses acting on the flow units of kind 1 and 2, respectively, and $X_1,\;X_2$ are the fractions of the surface area occupied by the two kinds of flow units; $f_j=(1/{\alpha}_j) sinh^{-1}\;{\beta}_j{{\dot{s}}\;(j=1\;or\;2)$, where $1/{\alpha}_j\;and\;{\beta}_j$ are proportional to the shear modulus and relaxation time, respectively. (4) We found that grain-boundary flow units only act in the deformation of Fe and Ti alloys whereas dislocation flow units do not show any appreciable contribution. (5) The deformations of Fe and Ti alloys belong generally to pattern A (Case 1) and B (Case 2), respectively. (6) By applying the equations, f=$(1/{\alpha}_{g1}) sinh^-1({\beta}_{g1}{\dot{s}}$) and $f=(X_{g1}/{\alpha}_{g1})sinh^{-1}({\beta}_{g1}{\dot{s}})+ (X_{g2}/{\alpha}_{g2})\;shih^{-1}({\beta}_{g2}{\dot{s}})$ to the flow data of Fe and Ti alloys, the parametric values of $x_{gj}/{\alpha}_{gj}\;and\;{\beta}_{gs}(j=1\;or\;2)$ were determined, here the subscript g signifies a grain-boundary flow unit. (7) From the values of ($({\beta}_gj)^{-1}$) at different temperatures, the activation enthalpy ${\Delta}H_{gj}^{\neq}$ of deformation due to flow unit gj was determined, ($({\beta}_gj)^{-1}$) being proportional to , the jumping frequency (the rate constant) of flow unit gj. The ${\Delta}H_{gj}\;^{\neq}$ agreed very well with ${\Delta}H_{gj}\;^{\neq}$ (self-diff) of the element j whose diffusion in the sample is a critical step for the deformation as proposed by Kim-Ree's theory (Refer to Tables 3 and 4). (8) The fact, ${\Delta}H_{gj}\;^{\neq}={\Delta}H_{j}\;^{\neq}$ (self-diff), justifies the Kim-Ree theory and their method for determining activation enthalpies for deformation. (9) A linear relation between ${\beta}^{-1}$ and carbon content [C] in hot-rolled steel was observed, i.e., In ${\beta}^{-1}$ = -50.2 [C] - 40.3. This equation explains very well the experimental facts observed with regard to the deformation of hot-rolled steel..
Anh, Dao Duc;Kim, Dongkyun;Kim, Soohyun;Park, Jeongha
한국수자원학회:학술대회논문집
/
한국수자원학회 2019년도 학술발표회
/
pp.157-157
/
2019
This study derived the Flood-Inducing-Rainfall (FIR) and the Flood-Inducing-Runoff (FIRO) from the radar-gage composite data to be used as the basis of the flood warning initiation for the urban area of Seoul. For this, we derived the rainfall depth-duration relationship for the 261 flood events at 239 watersheds during the years 2010 and 2011 based on the 10-minute 1km-1km radar-gauge composite rainfall field. The relationship was further refined by the discrete ranges of the proportion of the flooded area in the watershed (FP) and the coefficient variation of the rainfall time series (CV). Then, the slope of the straight line that contains all data points in the depth-duration relationship plot was determined as the FIR for the specified range of the FP and the CV. Similar methodology was applied to derive the FIRO, which used the runoff depths that were estimated using the NRCS Curve Number method. We found that FIR and FIRO vary at the range of 37mm/hr-63mm/hr and the range of 10mm/hr-42mm/hr, respectively. The large variability was well explained by the FP and the CV: As the FP increases, FIR and FIRO increased too, suggesting that the greater rainfall causes larger flooded area; as the rainfall CV increases, FIR and FIRO decreased, which suggests that the temporally concentrated rainfall requires less total of rainfall to cause the flood in the area. We verified our result against the 21 flood events that occurred for the period of 2012 through 2015 for the same study area. When the 5 percent of the flooded area was tolerated, the ratio of hit-and-miss of the warning system based on the rainfall was 44.2 percent and 9.5 percent, respectively. The ratio of hit-and-miss of the warning system based on the runoff was 67 percent and 4.7 percent, respectively. Lastly, we showed the importance of considering the radar-gauge composite rainfall data as well as rainfall and runoff temporal variability in flood warning system by comparing our results to the ones based on the gauge-only or radar-only rainfall data and to the one that does not account for the temporal variability.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.