• 농업과학연구
• /
• 제38권3호
• /
• pp.493-504
• /
• 2011

This study was carried out to safety evaluation, the practical application and improvement of design method of the agricultural reservoir due to raising embankments. Also, it was to compare and analyze the pore water pressure (PWP), seepage (leakage) quantity and piping phenomenon according to high water table and rapid drawdown. The seepage analysis by finite element analysis was used for steady state and transient condition. The pore water pressure distribution for steady state and transient condition showed positive(+) PWP on the upstream slope, it was gradually changed negative(-) PWP on the downstream slope. The PWP in the core ranged from 100 ~ -33 kPa, the seepage line in the incline-type core suddenly decreased towards the lower levels from the higher levels. The PWP according to rapid drawdown is remained in the vicinity of the upstream slope, therefore, it is investigated to be in an unstable state by the slope stability analysis. The PWP after raising embankments showed smaller than in the before raising embankments. It was likely to be the piping phenomenon because the gradients in the before raising embankments showed largely at downstream slope, and the stability for piping in the after raising embankments increased stable state. The seepage quantity per 1 day and the leakage per 100m for the steady state and transient condition appeared to be safe against the piping. It reduced slightly regardless of the transient condition before the raising embankments and it decreased largely about 2.4 times in the early days after the raising embankments.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.433-442
• /
• 1995

For the line search of a multi-variable optimization, an efficient algorithm is presented. The algorithm sequentially employs several polynomial approximations such as 2-point quadratic interpolation, 3-point cubic interpolation/extrapolation and 4-point cubic interpolation/extrapolation. The order of polynomial function is automatically increased for improving the accuracy of approximation. The method of approximation (interpolation or extrapolation) is automatically switched by checking the slope information of the sample points. Also, for selecting the initial step length along the descent vector, a new approach is presented. The performance of the proposed method is examined by solving typical test problems such as mathematical problems, mechanical design problems and dynamic response problems.

• 대한토목학회논문집
• /
• 제5권4호
• /
• pp.15-22
• /
• 1985

본(本) 연구(硏究)는 제체(堤體)에 있어서, 수위(水位)가 급상승(急上昇)함에 따라 제체내부(堤體內部)의 공극수압(空隙水壓)이 변화(變化)하는 제체경사면(堤體傾斜面)의 파괴현상(破壞現象)을 연구(硏究)한 것이다. 그리고 이미 발표(發表)된 근사이론식(近似理論式)을 토대로 국부(局部) 파괴현상(破壞現象)을 실험(實驗)을 통(通)하여 고찰(考察)했다. 본(本) 실험(實驗)에서 연구(硏究)된 내용(內容)은 다음과 같다. 1) 침윤선(浸潤線)에 따른 유출점(流出點)의 위치 결정(決定) 2) 유출점(流出點) 부근(部近)에서 발생(發生)되는 국부(局部) 파괴현상(破壞現象)에 대한 고찰(考察) 3) 침투수압(浸透水壓)이 제체(堤體)에 미치는 영향(影響)

• 한국전문물리치료학회지
• /
• 제10권3호
• /
• pp.141-149
• /
• 2003

Median frequency can be regarded as a valid indicator of local muscle fatigue. As local muscle fatigue develops, the muscle fiber conduction velocity decreases, the fast twitch fibers are recruited less, and consequently the median frequency shifts toward the lower frequency area. The aim of this study was to test the characteristics of the median frequency according to exercise load (30% and 60% of MVC on the biceps brachii, 40% and 80% of MVC on the vastus lateralis) during the fatiguing isometric exercise. Thirteen healthy male volunteer students of Yonsei University were recruited. After the testing maximal voluntary isometric contraction, three variables (initial median frequency, regression slope, fatigue index) from the regression line of MDF data were measured in each exercise load. The results showed that the regression slope and fatigue index were significantly different for the biceps brachii, but not for the vastus lateralis initial MDF was not significant difference according to the exercise load on both muscles. The regression slope and fatigue index could monitor physiologic muscle change during fatiguing isometric exercise. The results showed that two MDF variables reflect the local muscle fatigue according to the exercise load.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.1007-1010
• /
• 2006

This study investigates the spatial structure of the total cloud liquid water content Q fields over the Northwest Pacific Ocean during winter monsoon. The distributions of Q have been estimated from the brightness temperatures of the ocean - atmosphere system $T_B(f)$, where f is frequency, measured by AQUA AMSR-E in January -March 2003. Marine strati (St) and stratocumuli (Sc) are typical for winter monsoon season. They were analysed using mainly high-frequency channel at f = 36.5 GHz, vertical polarisation. $T_B$ data were accompanied by the data on near surface wind speed, air temperature and humidity from the nearest meteorological stations. Tow one-dimensional spectra were computed for downwind and crosswind sections of Q fields. The AMSR-E antenna field of view (14-8 km) and the cloud field sizes (100-1000 km) restricted the spatial scales. The results of case study Jan 31 2003 are presented. Scale-invariant spectrum is typical. In the cases of extended St levels a spectral slope equals about -1.7, conforming to classical -5/3 of turbulence theory. For Sc cases the absolute magnitude of spectral slope is rather higher, as a rule. The value is about -2. In the case when cloud streets are presented, a strait line form of spectrum is less reliable with a slope being rather lower (about -1.4).

• 산업기술연구
• /
• 제28권B호
• /
• pp.39-45
• /
• 2008

Temperature variation according to space and time on the inner parts of engineering constructions(e.g.: dam, slope) can be a basic information for diagnosing their safety problem. In general, as constructions become superannuated, structural deformation(e.g.: cracks, defects) could be occurred by various factors. Seepage or leakage of water through these cracks or defects in old dams will directly cause temperature anomaly. Groundwater level also can be easily observed by abrupt change of temperature on the level. This study shows that the position of seepage or leakage in dam body can be detected by multi-channel temperature monitoring using thermal line sensor. For this, diverse temperature monitoring experiments for a leakage physical model were performed in the laboratory. In field application of an old earth fill dam, temperature variations for water depth and for inner parts of boreholes located at downstream slope were measured. Temperature monitoring results for a long time at the bottom of downstream slope of the dam showed the possibility that temperature monitoring can provide the synthetic information about flowing path and quantity of seepage of leakage in dam body.

• 한국정보통신학회논문지
• /
• 제15권10호
• /
• pp.2093-2099
• /
• 2011

음성 신호와 자동차 엔진 배기음 등의 소음이 섞인 신호에서 통계적 방법을 이용하여 음성 신호와 자동차 소음 신호를 분리하였다. 분리된 신호에서 음성신호를 구분해 내기 위해 128개의 원소를 갖는 신호 조각의 연속으로 신호를 재구성하고 각 신호 조각에 대해 FFT를 구하였다. 각 신호 조각의 FFT 계수 중에서 저주파 영역의 일부 계수 중 계수 각각에 대해 각 신호 조각 사이의 자기 공분산을 구하고 이들을 평균하였다. 그리고 linear regression을 이용 하여 평균 자기 공분산 값들을 연결하는 직선의 방정식을 구한 후 이 직선의 기울기를 비교하여 음성 신호와 자동차 소음 신호를 구분하는 방법을 제안하고 유용성을 확인하였다.

• 한국해안해양공학회지
• /
• 제7권2호
• /
• pp.141-147
• /
• 1995

파랑변형을 계산하는 여러가지 수치모형이 제안되어 있다. 그 중에서도 선유량과 수면변위로 나타내는 시간의존 완경사방정식을 이용한 수치모형이 반사파가 존재하는 파랑장에서는 지금까지 널리 사용되고 있다. 이 경우 경사지게 입사하는 파에 대하여 파랑장의 외해경계 뿐만 아니라 측방경계 중, 하나는 입사경계로 처리되어야 한다. 본 연구에서는 측방입사경계 처리 방법으로서, Maruyama와 Kajima(1985), Copeland(1985), 그리고 Ohnaka와 Watanabe(1987)의 방법을 고려한 후, 파고비, 파향 그리고 위상의 계산결과치로 각 방법들의 특성을 비교 분석하였다. 그 결과 Ohnaka와 Watanabe(1987)의 방법이 일반적인 해저경사를 가진 파랑장에서 가장 적절한 측방입사경계 처리 방법인 것을 알 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제6권2호
• /
• pp.15-20
• /
• 2005

도로 주변 절토사면 상부에 시공되는 산마루 측구는 상부로부터 흘러내리는 지표수를 원활히 배수시켜 절개면으로 유입되는 것을 방지한다. 국내의 경우 전 국토의 70%이상이 산악지로 구성되어 있어 도로 개설에 따른 절개면의 발생은 필연적이다. 여름 집중호우와 간극수압의 증가로 인하여 절개면의 불안정성은 증가된다. 그러나 절토사면 상부에 시공되어 있는 산마루측구는 품질관리의 어려움과 배수능력 부족 등의 문제점들이 있다. 따라서, 본 논문에서는 산마루 측구의 깊이와 투수계수에 따른 절토사면의 안전율 변화를 분석하였으며 적절한 측구 설치깊이를 결정하였다.

• 센서학회지
• /
• 제25권6호
• /
• pp.423-430
• /
• 2016

This study used a single metal oxide semiconductor (MOS) sensor to classify the major odorous gases hydrogen sulfide ($H_2S$), ammonia ($NH_3$) and toluene ($C_6H_5CH_3$). In order to classify these odorous substances, the voltage on the MOS sensor heater was gradually reduced in 0.5 V steps 5.0 V to examine the changes to the response by the cooling effect on the sensor as the voltage decreased. The hydrogen sulfide gas showed the highest sensitivity compared to odorless air under approximately 2.5 V and the ammonia and toluene gases showed the highest sensitivity under approximately 5.0 V. In other words, the hydrogen sulfide gas reacted better in the low temperature range of the MOS sensor, and the ammonia and toluene gases reacted better in the high-temperature range. In order to analyze the response characteristics of the MOS sensor by temperature in a pattern, a two-dimensional (2D) x-y pattern analysis was introduced to clearly classify the hydrogen sulfide, ammonia, and toluene gases. The hydrogen sulfide gas was identified by a straight line with a slope of 1.73, whereas the ammonia gas had a slope of 0.05 and the toluene gas had a slope of 0.52. Therefore, the 2D x-y pattern analysis is suggested as a new way to classify these odorous substances.