• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.586-593
• /
• 2017

Modeling busbar distribution system as a transmission line is an important subject of power line communication in the smart grid concept. This requires extraction of busbar RLGC parameters, accurately. In this study, a comparison is made between conventional and modified method for the aspect of optimum RLGC parameters extraction in the 1 MHz to 50 MHz frequency band. The usefulness of these methods is shown both in time and frequency-domain analysis. The frequency-domain analyzes show that the inherent power of modified method can eliminate the errors especially due to the discontinuities arise in conventional method. This makes the modeling approach of modified method more advantageous for the busbars due to its robustness against disturbances in the S-parameters measurements which cannot be eliminated with the calibration procedure. On the other hand, time-domain simulations show that the transmission line representation of the modified method is closer to physical reality by handling causality issues.

• Journal of Families and Better Life
• /
• v.26 no.1
• /
• pp.15-29
• /
• 2008

The study examined the characteristics of internet shopping mall sites including on-line market places and integrated internet stores from a perspective of consumer protection. Specifically, the study investigated 1) whether sufficient information is provided on the internet shopping mall sites, 2) whether shopping mall sites abide by internet advertising principles, and 3) specific examples of consumer misleading potentialities from internet shopping sites. Further, on-line market places and integrated internet stores were compared based on their informativeness and potential consumer misleading factors. Total 50 shopping mall sites were analyzed for examining the types of information provided and consumer misleading factors. To verify study questions, descriptive statistics were used. For comparison between on-line market places and integrated internet stores, Chi-square test and independent-sample t-test were employed. The results of this study were as the following: First, not a few of the internet shopping mall sites did not provided important information such as safety and warrantees. Second, important disclosures were not noticeable on the web pages and distracting factors were frequently used. Third, integrated internet stores were desirable compared to on-line marketplaces based on informativeness and consumer misleading potentialities. As the result of this study, internet shopping malls need to advised to provide sufficient information and reduce potential misleading factors.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.27-29
• /
• 1995

In this study, we analyzed the transient overvoltage using comparison of lumped and distribution line parameter and compared the results. It is certificated that analysing method is given the same result.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.04a
• /
• pp.419-423
• /
• 2005

This paper is a research on feature extraction and comparison method of dynamic (on-line) signature verification. We suggest desirable feature information and modified DTW(Dynamic Time Warping) and describe the performance results of our enhanced dynamic signature verification system.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.761-770
• /
• 1997

71 Class I malocclusion samples were selected and they were divided into premolar-extraction and non-extraction groups. Vertical and horizontal cephalometric evaluations on dental and soft tissue measurements were done before and after treatment. Also, treatment results in adolescent patients and adult patients were compared. The following conclusions were obtained: 1. In comparison of extraction and non-extraction groups, all the dental and soft tissue measurements, with exception of SN-MP angle, upper lip to E-line, vertical movement of upper first molar, md horizontal movement of lower first molar, showed statistically significant differences. 2. In comparison of extraction and non-extraction groups of adolescent samples, there were statistically significant differences in upper and lower incisor inclinations, horizontal dental movements from vertical reference line, positional changes in upper and lower lips, and mesial movements of upper first molar. 3. In comparison of extraction and non-extraction groups of adult samples, there were statistically significant differences in upper and lower incisor inclinations, horizontal dental movements from vertical reference line, positional changes in upper and lower lips from I-line and vertical reference line, vertical height of upper first molar, and mesial movement of lower first molar. 4. There was no statistically significant difference in SN-MP angle between extraction and non-extraction groups of both adolescent and adult samples.

• Journal of Korea Multimedia Society
• /
• v.11 no.3
• /
• pp.292-300
• /
• 2008

An algorithm for detecting a line segment in an image is presented using incremental pixel extension. We use a different approach from conventional algorithms, such as the Hough transform approach and the line segment grouping approach. The Canny edge is calculated and an arbitrary point is selected among the edge elements. After the arbitrary point is selected, a base line approximating the line segment is calculated and edge pixels within an arbitrary radius are selected. A weighted value is assigned to each edge pixel, which is selected by using the error of the distance and the direction between the pixel and the base line. A line segment is extracted by Jilting a line using the weighted least square method after determining whether selected pixels are linked or delinked using the sum comparison of the weights. The proposed algorithm is compared with two other methods and results show that our algorithm is faster and can detect the real line segment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1668-1675
• /
• 1999

In this thesis, a narrowband bandpass filter using HTS is proposed for the multiplexer of the satellite communication subsystems. The proposed structure using HTS provides the narrower band and the lower insertion loss characteristics than the conventional parallel-coupled-line bandpass filter. The filter structure using hairpin-line only cause the spurious modes due to the surface waves. But these modes can be lessened by using the hybrid hairpin-line/parallel-coupled-line proposed in this thesis. The narrowband bandpass filters using HTS at the operation frequency of 14.25 GHz are fabricated to have the narrow bandwidth less 1% and the insertion loss less 3dB in comparison with the normal metal microstrip filter with the same three poles. The experimental results show that the filter using HTS has the characteristics of the narrower bandwidth and less insertion loss and can be fabricated with more compact size in comparison with the bandpass filter using normal metal.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.404-408
• /
• 2014

In this research we evaluate the excitation homogeneity and SAR of three different Tx arrays after B1+ Shimming in the human body at 3T. Through the simulations, we compared the field properties that are standard deviation and mean value of transverse magnetization for 1) strip line TEM array, 2) rectangular loop array, 3) combined array of strip line element and rectangular loop and shown the utilities of B1+ shimming in human body model. After B1+ shimming, it is evaluated four different types of SAR for body mesh through whole body simulation; those are average, maximum 1-cell, maximum 1-gram, and maximum 10-gram SAR. It appears that in this particular comparison an array based on strip line elements can produce better homogeneity and lower SAR than an array of rectangular loops or an array of combined elements (strip line and loop). While many factors are considered in designing coils for production, it is hoped that methods and results like these will be used in the future to guide decisions and maximize benefit.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.8
• /
• pp.432-437
• /
• 2004

Since the characteristic frequency is decreased in proportion to the fault distance, the characteristic frequency component may be insufficiently eliminated by a low-pass filter on a long transmission line. In order to set a standard for the cut-off frequency of the low-pass filter, this paper proposes a method for obtaining the characteristic frequencies due to line faults. The application results of the proposed method are presented for line to ground (LG) faults and line to line (LL) faults on a 345 kV 200 km overhead transmission line. The EMTP is used to generate fault signals under different fault locations and fault inception angles. By comparison between the characteristic frequencies obtained from the proposed method and the EMTP simulation, it is shown that the proposed method accurately obtains the characteristic frequency.

• International Journal of Highway Engineering
• /
• v.20 no.4
• /
• pp.35-46
• /
• 2018

PURPOSES : The purpose of this study is to compare the lane curing time of natural drying and a lane drying device when painting lines on a highway. METHODS : The painting process was carried out in July 2015 and September 2015, respectively, for the Gimcheon IC - Gimcheon JC. After the painting, measurements were obtained three times at six measurement points located at 20 m intervals on the shoulder line and the dividing line. The curing time was measured for natural drying and drying using a lane drying device, and compared for different pavement types (asphalt, concrete) and paint types (waterborne paint, methyl methacrylate paint). RESULTS : The results of the lane curing time comparison on the highway are as follows. The combination of asphalt and methyl methacrylate paint cured more rapidly during both the natural drying and drying using the lane drying device. Finally, it was cured at least 32.2% and 40.7% faster when using a drying device than in natural drying. CONCLUSIONS : The comparison of lane curing time of the highway showed that the combination of asphalt and methyl methacrylate paint cured more rapidly when using both natural drying and a lane drying device.