• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.248-253
• /
• 2023

Most offshore platforms utilize chain mooring systems for position keeping. However, information regarding related design modification processes is scarce in literature. This study focuses on the floating liquefied natural gas (LNG) bunkering terminal (FLBT) as the target of shore platform and analyzes the corresponding initial mooring design and model tests via numerical simulations. Subsequently, based on the modified design conditions, a new mooring system design is proposed. Adjusting the main direction of the mooring line bundle according to the dominant environmental direction is found to significantly reduce the mooring design load. Even turret-moored offshore platforms are exposed to beam sea conditions, leading to high mooring tension due to motions in beam sea conditions. Collinear environmental conditions cannot be considered as design conditions. Mooring design loads occur under complex conditions of wind, waves, and currents in different environmental directions. Therefore, it is essential appropriately assign the roll damping coefficients during mooring analysis because the roll has a significant effect on mooring tension.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3104-3104
• /
• 2001

The research described here was undertaken with the aim of monitoring, optimizing and ultimately controlling the production of heterofermentative microbes used as starters in the salami industry. The use of starter cultures in the fermented meats industry is a well-established technique used to shorten and standardize the ripening process, and to improve and control the organoleptic quality of the final product. Starter cultures are obtained by the submerged cultivation of suitable microorganisms in stirred, and sometimes aerated, fermenters where monitoring of key physiological parameters such as the concentration of biomass, substrates and metabolites suffers from the general lack of real-time measurement techniques applicable to aseptic processes. In this respect, the results of the present work are relevant to all submerged fermentation processes. Previous work on the application of on-line NIR spectroscopy to the lactic acid fermentation (Dosi et al. - Monreal NIR1995) had successfully used a system based on a measuring cell included in a circulation loop external to the fermenter. The fluid handling and sterility problems inherent in an external circulation system prompted us to explore the use of an in-line system where the NIR probe is immersed in the culture and is thus exposed to the hydrodynamic conditions of the stirred and aerated fluid. Aeration was expected to be a potential source of problems in view of the possible interference of air bubbles with the measurement device. The experimental set-up was based on an in-situ sterilizable NIR probe connected to the instrument by means of an optical fiber bundle. Preliminary work was carried out to identify and control potential interferences with the measurement, in particular the varying hydrodynamic conditions prevailing at the probe tip. We were successful in defining the operating conditions of the fermenter and the geometrical parameters of the probe (flow path, positioning, etc.) were the NIR readings were reliable and reproducible. The system thus defined was then used to construct and validate calibration curves for tile concentration of biomass, carbon source and major metabolites of two different microorganisms used as salami starters. Real-time measurement of such parameters coupled with the direct interfacing of the NIR instrument with the PC-based measurement and control system of the fermenter enabled the development of automated strategies for the interactive optimization of the starter production process.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.204-220
• /
• 2007

The background of Korean Ethnical Costume was originated from those northern mounted nomadic groups, which was Scythe style Costume Culture. Through the antique records and paintings of tombs bequests hereby describe the forms of Scythian Cotume (1) Headgear : There was Conical Cap(or Pointed Cap), Feathered Cap, and Crown. (2) Clothes : Both Men and Women wore Jacket as upper garment with leftsided collars, narrow sleeves to the length of the hip line. As lower garment, they wore the tight Trousers and Kungo(:窮袴)that was attached with gusset. (3) Belts and Boots : On the upper garment bound the leather Belts that was hanged a hook that was shaped of animal form at the end. Scythian Buckles was divided into six groups, animal-shaped, animal's head shaped, animal fight-shaped, rectangle-shaped, rectangle openwork-shaped, genre scene shaped Buckle. To the Boots, they wore leather boots. (4) Ornaments : Ornaments divided into Dress Trimming(:Gold plaques), Earrings, Necklaces(;Torques), Bracelets, Rings. Scythian Gold Plaques were divided into several types according to the shape, animal style(curved beast shape, profile shape, head reversed over its back shape), round shape, quadrilateral form, star shape, flower shape, crescent shape, bundle shape, human appearance. Earrings consisted of a plain ring and pendant ring was a middle ornament hung from it to a pendants which hung was made of heart shaped leaves of the tree, beads-linked. Scythian Torques were divided into several types according to the shape, Torque with Terminal style, Spiral style, Layers style, Crescent-shaped pectoral style, Crown style. Scythian Bracelet were divided into 4 styles according to the shape, Bracelets with ends shaped like beasts style, Spiral style, Layers style, Crown with openwork style. Rings were rhomb-shaped and animal shaped styleRings (5) Animal motifs used in Scythian ornaments appears that in some cases the work was intended to be purely ornamental, while many times the motifs had symbolic meaning (such as the successful dominance of the aggressor over the victim portrayed in the attack scenes). Magical use of symbols may have been inten-ded to guarantee the power of the aggressor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1828-1834
• /
• 2004

With the rapid development of wireless communications and mobile technologies, requirements of various services based on moving objects like location-based services and mobile applications services have been increased. In this paper, we propose an index structure which can improve the performance on trajectory-based query especially, one of the various query types for moving objects in mobile applications. It maintains link table(L-Table) to obtain good efficiency on retrieval and insertion performance of the existing TB(Trajectory Bundle)-tree proposed for trajectory-based query of moving objects. The L-Table contains page number in disk and memory pointers pointing the leaf node with the first and last line segment of moving objects in order to directly access preceding node. In addition, we design to reside a part of whole index in main memory by preserving a fixed size of buffer in case of being restricted by available main memory. Finally, experimental results with various data sets show that the proposed technique is superior to the existing index structures with respect to insertion and trajectory-based query.

• KIISE Transactions on Computing Practices
• /
• v.22 no.12
• /
• pp.663-674
• /
• 2016

Traditional supercomputing services suffer from limited accessibility and low utilization in that users(researchers) may perform computational executions only using terminal-based command line interfaces. To address this problem, in this paper, we provide the design and implementation details of National supercomputing service framework. The proposed framework supports all the fundamental primitive functions such as user management/authentication, heterogeneous computing resource management, HPC (High Performance Computing) job management, etc. so that it enables various 3rd-party applications to be newly built on top of the proposed framework. Our framework also provides Web-based RESTful OpenAPIs and the abstraction interfaces of job schedulers (as well as bundle scheduler plug-ins, for example, LoadLeveler, Open Grid Scheduler, TORQUE) in order to easily integrate the broad spectrum of heterogeneous computing clusters. To show and validate the effectiveness of the proposed framework, we describe the best practice scenario of high energy physics Lattice-QCD as an example application.

• Journal of fish pathology
• /
• v.7 no.1
• /
• pp.1-5
• /
• 1994

Nuclear polyhedrosis virus was successfully infected the continuous Sf cell line. At 12hrs post-infectio(P.I), the cell lost the motility and the nuclei of the cells were hypertrophied. At 24hrs P.I, the cells were somewhat abnormal form and PIB formation was observed. At 48hrs, the PIBs formed in all cells. PIBs in the nuclei were released in the culture media at 72hrs P.I. By the observation of NPV morphogenesis by electron microscopy at 13hrs P. I, the virogenic stroma formed in the nucleus, and nucleocapsids formed. At 48hrs P.I, many nucleocapsids were bundled and then occluded in PIB, and PIBs were matured. PIB shapes were mostly tetragonal and a polyhedron was about $3{\sim}10{\mu}m$ in size. Virions were rod shape. nucleocapsids ranging in size $30{\sim}40{\times}300{\sim}400nm$.

• Journal of Digital Convergence
• /
• v.16 no.2
• /
• pp.335-341
• /
• 2018

This study is a study on effective stitching technique for video recorded by using a dual-lens $360^{\circ}$ camera composed of two fisheye lenses. First of all, this study located a problem in the result of stitching by using a bundled program. And the study was carried out, focusing on looking for a stitching technique more efficient and closer to perfect by comparatively analyzing the results of stitching by using Autopano Video Pro and Autopano Giga, professional stitching program. As a result, it was shown that the problems of bundled program were horizontal and vertical distortion, exposure and color mismatch and unsmooth stitching line. And it was possible to solve the problem of the horizontal and vertical by using Automatic Horizon and Verticals Tool of Autopano Video Pro and Autopano Giga, problem of exposure and color by using Levels, Color and Edit Color Anchors and problem of stitching line by using Mask function. Based on this study, it is to be hoped that $360^{\circ}$ VR video content closer to perfect can be produced by efficient stitching technique for video recorded by using dual-lens $360^{\circ}$ camera in the future.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.2
• /
• pp.126-131
• /
• 2002

Anatomical shape of the mandibular ramus, which includes the area from the rear of the mandibular second molar to the mandibular posterior border and from the mandibular sigmoid notch to the inferior mandibular border, must be carefully considered to perform orthognathic surgery. The locations of the lingula and mandibular foramen in medial side of mandibular ramus are one of the most important factors to decide the location of the horizontal medial osteotomy in sagittal split ramus osteotomy and to select the line of vertical osteotomy in intraoral vertical ramus osteotomy. Sixty-five different Korean human dry mandibles were surveyed. All mandible have permanent dentition including complete eruption of the mandibular second molar. The locations of the lingula and mandibular foramen in medial side of the ramus were identified and following results were obtained. Anterior ramal horizontal distance from lingula was $16.13{\pm}3.53mm(range:8.6{\sim}24.3mm)$, anterior ramal horizontal distance from mandibular foramen was $23.91{\pm}4.79mm(range: 14.1{\sim}39.7mm)$, horizontal width of mandibular foramen was $2.79{\pm}0.95mm(range:1.5{\sim}6.1mm)$, height of lingula was $10.51{\pm}3.84mm(range:3.1{\sim}22.4mm)$, vertical distance from sigmoid notch to lingula was $19.82{\pm}5.11mm(range:9.1{\sim}35.3mm)$. From this study, the result could be used to select the location of osteotomy lines and to decide amount of periosteal elevation to avoid injury of neurovascular bundle, and to accomplish the appropriate split in Korean patients in mandibular orthognathic surgery.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.554-557
• /
• 2016

Recently, supercomputer has been increasingly adopted as a computing environment for scientific simulation as well as education, healthcare and national defence. Especially, supercomputing system with heterogeneous computing resources is gaining resurgence of interest as a next-generation problem solving environment, allowing theoretical and/or experimental research in various fields to be free of time and spatial limits. However, traditional supercomputing services have only been handled through a simple form of command-line based console, which leads to the critical limit of accessibility and usability of heterogeneous computing resources. To address this problem, in this paper, we provide the design and implementation of web-based HPC (High Performance Computing) job management framework for computational scientific simulation. The proposed framework has highly extensible design principles, providing the abstraction interfaces of job scheduler (as well as bundle scheduler plug-ins for LoadLeveler, Sun Grid Engine, OpenPBS scheduler) in order to easily incorporate the broad spectrum of heterogeneous computing resources such as cluster, computing cloud and grid. We also present the detailed specification of HTTP standard based RESTful endpoints, which manage simulation job's life-cycles such as job creation, submission, control and status monitoring, etc., enabling various 3rd-party applications to be newly created on top of the proposed framework.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.1
• /
• pp.1-15
• /
• 2014

The Yeongam mineralized zone is located in the southwestern part of the Korean peninsula, including the Sangeun, Eunjeok and Baramjai mines. This zone is located in the northeastern part of the Mokpo-Haenam-Yeongam volcanic circular structure. The 13 sites of quartz vein with mineralization are developed in the Sangeun-Eunjeok-Baramjai area, within rhyolitic welded tuff, showing N-S or NNW trend with highly dipping to the west. The quartz veins occur as a single vein or a bundle of veins with width of 1-5 cm in each. The existence of faults parallel to the quartz veins indicates that the faulting occurred before and after the development of quartz veins and mineralization. The quartz veins and mineralized zone are displaced by NW-trending sinistral strike-slip faults. The extension of the Sangeun-Eunjeok mineralized belt is traced to the south, following a NNW-trending tectonic line, and the Au-Ag contents are analysed in the 12 sites of quartz veins. Contents of gold and silver are 12.3 g/t and 1,380.0 g/t in Eunjeok mine, 2.7 g/t, 23.5g in Sangeun mine, and <0.1 g/t, 5.7 g/t in Baramjai mine respectively. Therefore, a highly Ag-Au mineralized zone is not developed in the southern part of the studied area.