• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1721-1726
• /
• 2014

The sensor network technology for core technology of ubiquitous computing is in the spotlight recently, the research on sensor network is proceeding actively which is composed many different sensor node. The major traffic patterns of plenty of sensor networks are composed of collecting types of single directional data, which is transmitting packets from several sensor nodes to sink node. One of the important condition for design of sensor node is to extend for network life which is to minimize power-consumption under the limited resources of sensor network. In this paper analysis used routing protocols using the network simulation that was used second level cluster structure to reduce delay and power-consumption of sensor node.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.97-105
• /
• 2017

An air-burst munition is limited in space, so there is a limit on the size of the fuze and the amount of ammunition. In order to increase a firepower to a target with limited ammunition, it is necessary to concentrate the firepower on the ground instead of the omnidirectional explosion after flying to the target. This paper explores the design and verification of a ground-detection sensor that detects the direction of the ground and determines the flight-distance of an air-burst munition using a single axis geomagnetic sensor. Prior to the design of the ground detection sensor, a geomagnetic sensor model mounted on the spinning air-burst munition is analyzed and a ground-detection algorithm by simplifying this model is designed. A high speed rotating device to simulate a rotation environment is designed and a geomagnetic sensor and a remote-recording system are fabricated to obtain geomagnetic data. The ground detection algorithm is verified by post-processing the acquired geomagnetic data. Taking miniaturization and low-power into consideration, the ground detection sensor is implemented with analog devices and the processor. The output signal of the ground detection sensor rotating at an arbitrary rotation speed of 200 Hz is connected to the LED (Light Emitting Diode) in the high speed rotating device and the ground detection sensor is verified using a high-speed camera.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.459-465
• /
• 2008

Locations of nodes as well as gathered data from nodes are very important because generally multiple nodes are deployed randomly and data are gathered in wireless sensor network. Since the nodes composing wireless sensor network are low cost and low performance devices, it is very difficult to add specially designed devices for positioning into the nodes. Therefore in wireless sensor network, technology positioning nodes precisely using low cost is very important and valuable. This research proposes Cooperative Positioning System, which raises accuracy of location positioning and also can find positions on multiple sensors within limited times.

• Journal of information and communication convergence engineering
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2012

As the new requirements for wireless sensor networks are emerging, real-time communications is becoming a major research challenge because resource-constrained sensor nodes are not powerful enough to accommodate the complexity of the protocol. In addition, an efficient energy management scheme has naturally been a concern in wireless sensor networks for a long time. However, the existing schemes are limited to meeting one of these two requirements. To address the two factors together, we propose real-time communications with two approaches, a protocol for satisfied conditions and one for unsatisfied. Under the satisfied requirement, existing real-time protocol is employed. On the other hand, for the unsatisfied requirement, the newly developed scheme replaces the existing scheme by adjusting the transmission range of some surplus nodes. By expanding the transmission range, the end-to-end delay is shortened because the number of intermediate nodes decreases. These nodes conserve their energy for real-time communications by avoiding other activities such as sensing, forwarding, and computing. Finally, simulation results are given to demonstrate the feasibility of the proposed scheme in high traffic environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.833-839
• /
• 2010

Mobility of sensor node is one of the rising issues in Wireless Sensor Networks (WSN). However, current security researches on WSN only consider static environments. Thus they are not sufficient to be deployed in the dynamic environment where the resource is limited. In this paper, we propose the efficient node authentication and key exchange protocol that reduces the overhead in node re-authentication.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.202-204
• /
• 1995

An acoustic sensor using PVDF film is proposed in this paper. And its properties, such as sensitivity level, identification of sound source frequencies. and directivity, were experimented. Sensitivity level measured at the distance of 1[m] was limited in the range of ${\pm}$10dB. Adjacent three frequencies were also tested to identify the frequency of sound sources. In the range of audible frequencies, it could distinguish the frequencies of a complex sound. In addition, it was found that the sensor outputs were maximum in the coincided direction with a source, when directivity was experimented with three sound sources and FFT. The proposed PVDF film sensor has good characteristics of directivity and identifying ability as an acoustic sensor.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.517-520
• /
• 2003

Commercial video scope use CCD sensor and frame grabber for image capture and A/D interface but application limited by input resolution and high cost. In this paper we introduce portable video scope using CMOS sensor, USB pen and tuner card (low frame grabber) in place of commercial CCD sensor and frame grabber. Our video scope serves as an essential link between advancing commercial technology and research, providing cost effective solutions for educational, engineering and medical applications across an entire spectrum of needs. The software implementation is done using Direct Show in second version after initial trials using First version VFW (video for window), which gave very low frame rate. Our video scope operates on windows 98, ME, XP, 2000. The drawback of our video scope is crossover problem in output images caused due to interpolation, which has to be rectified for more efficient performance.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.271-298
• /
• 2012

Researchers have made significant progress in recent years towards realizing effective structural health monitoring (SHM) utilizing wireless smart sensor networks (WSSNs). These efforts have focused on improving the performance and robustness of such networks to achieve high quality data acquisition and distributed, in-network processing. One of the primary challenges still facing the use of smart sensors for long-term monitoring deployments is their limited power resources. Periodically accessing the sensor nodes to change batteries is not feasible or economical in many deployment cases. While energy harvesting techniques show promise for prolonging unattended network life, low power design and operation are still critically important. This research presents the WiSeMote: a new, fully integrated ultra-low power wireless smart sensor node and a flexible base station, both designed for long-term SHM deployments. The power consumption of the sensor nodes and base station has been minimized through careful hardware selection and the implementation of power-aware network software, without sacrificing flexibility and functionality.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.3
• /
• pp.79-86
• /
• 2009

This paper proposes a mechanism for prompt and efficient construction of sensor network connecting sensor nodes and base stations using limited length edges minimum spanning tree. This mechanism can rapidly build a connecting tree which may be used in routing of sensor network. In an experiment for 2000 input terminal nodes, this mechanism can curtail 94.7% construction time comparing with the method by naive minimum spanning tree without tree length overheads. This shows the proposed mechanism can apply well to the application of swift construction of a sensor network.

• Journal of Information Technology Applications and Management
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2007

The ubiquitous computing system is expected to be widely utilized in digital home, logistics control, environment/disaster management, medical/health-care services and other applications. The ubiquitous sensor network (USN) is a key infra-structure of this system. Nodes in the USN are exposed to adverse environments and required to perform their missions with very limited power supply only. Also the sensor network is composed of much more nodes. In case some node consumes up its power capacity under a certain required level, the network topology should change and re-routing/ re-transmission of data is necessitated. Resultantly communication protocols studied for conventional wireless networks or ad-hoc networks are not suitable for the sensor network. Schemes should be devised to control the efficient usage of node power in the sensor network. This paper proposes a routing algorithm to enhance the efficiency of power consumption for USN node and analyzes its performance by simulation.