• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.15-15
• /
• 2011

The radar observation system in Japan is operated by two governmental groups: Japan Meteorological Agency (JMA) and the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) of Japan. The JMA radar observation network is comprised of 20 C-band radars (with a wavelength of 5.6 cm), which cover most of the Japan Islands and observe rainfall intensity and distribution. And the MLIT's radar observation system is composed of 26 C-band radars throughout Japan. The observed radar echo from each radar unit is first modified, and then sent to the National Bureau of Synthesis Process within the MLIT. Through several steps for homogenizing observation accuracy, including distance and elevation correction, synthesized rainfall intensity maps for the entire nation of Japan are generated every 5 minutes. The MLIT has recently launched a new radar observation network system designed for flash flood observation and forecasting in small river basins within urban areas. It is called the X-band multi parameter radar network, and is distinguished by its dual polarimetric wave pulses of short length (3cm). Attenuation problems resulting from the short wave length of radar echo are strengthened by polarimetric wavelengths and very dense radar networks. Currently, the network is established within four areas. Each area is observed using 3-4 X-band radars with very fine resolution in spatial (250 m) and temporal (1 minute intervals). This study provides a series of utilization procedures for the new input data into a real-time forecasting system. First of all, the accuracy of the X-band radar observation was determined by comparing its results with the rainfall intensities as observed by ground gauge stations. It was also compared with conventional C-band radar observation. The rainfall information from the new radar network was then provided to a distributed hydrologic model to simulate river discharges. The simulated river discharges were evaluated again using the observed river discharge to estimate the applicability of the new observation network in the context of operations regarding flood forecasting. It was able to determine that the newly equipped X-band polarimetric radar network shows somewhat improved observation accuracy compared to conventional C-band radar observation. However, it has a tendency to underestimate the rainfall, and the accuracy is not always superior to that of the C-band radar. The accuracy evaluation of the X-band radar observation in this study was conducted using only limited rainfall events, and more cases should be examined for developing a broader understanding of the general behavior of the X-band radar and for improving observation accuracy.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.2
• /
• pp.145-152
• /
• 2023

In this study, microscopic observation was made on the surface of cement paste immersed in an aquatic environment for 100 days at electrochemical treatment to mitigate the leaching of alkali ions. To quantitatively rank the hydration products, unhydrated grains and porosity in the interfacial region, the backscattered electron(BSE) images were obtained by scanninng electron microscopy. As a result, it was found that the porosity on the surface was significantly reduced by the electrochemical treatment, while unhydrated grains were more or less increased presumably limited hydration reaction under electric charge. At electrochemical treatment, Ca²⁺ ions present in C-S-H gel could be precipitated with OH^- to form Ca(OH)₂ then to lower C-S-H gel and simultaneously to enhance Ca(OH)₂. Substantially, the risk of alkali leaching could be lowered by the limited ionized matrix under electrochemical treatment.

• Journal of The Korean Association For Science Education
• /
• v.31 no.5
• /
• pp.770-787
• /
• 2011

The purpose of this study was to analyze science-gifted students' knowledge-generation processes by analyzing students' inquiry journal. As a result, first, science-gifted students showed various knowledge-generation processes, but they were limited to inductive thinking and abductive thinking, and their thinking processes were very simple. Second, most of the knowledge-generation processes of science gifted were simple, repetitive and diagrammatic processes because of observation and empirical situation of a limited scope. And a simple and repetitive diagram was generated by a simple variable selection and design, observation in limited scope, unbiased intervention by subjective thinking, and absence of exploration or finding errors. And they showed often a logical leap of reasoning.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.42.2-42.2
• /
• 2019

Korea Astronomy and Space Science Institute (KASI) has been developing a next-generation coronagraph (NGC) in cooperation with NASA to measure the coronal electron density, temperature, and speed using four different filters around 400 nm. To demonstrate technology for the measurement through the 2017 total solar eclipse across the USA, KASI organized an expedition team to demonstrate the coronagraph measurement scheme and the instrumental technology. The observation site was in Jackson Hole, Wyoming, USA. We built an eclipse observation system, so-called Diagnostic Coronal Experiment (DICE), which is composed of two identical telescopes to improve a signal to noise ratio. The observation was conducted with 4 wavelengths and 3 linear polarization directions according to the planned schedule in a limited total eclipse time of about 140 seconds.Polarization information of corona from the data was successfully obtained but we failed to get the coronal electron temperature and speed information due to a low signal-to-noise ratio of the optical system. In this study, we report the development of DICE and observation results. TSE observation and analysis by using our own developed instrument gave an important lesson that a coronagraph should be carefully designed to archive the scientific purpose. This experience through TSE observation will be very useful for a success of NASA-KASI joint missions called the Balloon-borne Investigation of the Temperature and Speed of Electrons in the Corona (BITSE) and COronal Diagnostic EXperiment (CODEX).

• Journal of The Korean Astronomical Society
• /
• v.53 no.4
• /
• pp.87-98
• /
• 2020

The Korea Astronomy and Space Science Institute (KASI) has been developing a next-generation coronagraph (NGC) in cooperation with NASA to measure the coronal electron density, temperature, and speed simultaneously, using four different optical filters around 400 nm. KASI organized an expedition to demonstrate the coronagraph measurement scheme and the instrumental technology during the 2017 total solar eclipse (TSE) across the USA. The observation site was in Jackson Hole, Wyoming, USA. We built an eclipse observation system, the Diagnostic Coronal Experiment (DICE), composed of two identical telescopes to improve the signal-to-noise ratio. The observation was conducted at four wavelengths and three linear polarization directions in the limited total eclipse time of about 140 seconds. We successfully obtained polarization data for the corona but we were not able to obtain information on the coronal electron temperature and speed due to the low signal-to-noise ratio of the optical system and strong emission from prominences located at the western limb. In this study, we report the development of DICE and the observation results from the eclipse expedition. TSE observation and analysis with our self-developed instrument showed that a coronagraph needs to be designed carefully to achieve its scientific purpose. We gained valuable experience for future follow-up NASA-KASI joint missions: the Balloon-borne Investigation of the Temperature and Speed of Electrons in the Corona (BITSE) and the COronal Diagnostic EXperiment (CODEX).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.472-482
• /
• 2008

A modulation transfer function(MTF) tree is established to estimate the overall MTF of an observation satellite and to analyze the image performance. Basic MTF models relevant to each MTF tree component are represented as mathematical relationship between optics-structural dynamics, thermal deformation, attitude and dynamic characteristics of a satellite and the effects due to the space environment. The Basic MTF models consist of diffraction limited MTF with central obscuration, aberration, defocus, line-of-sight(LOS) jitter, linear motion, detector integration, and so forth. Performance estimation is demonstrated for a virtual earth-observation satellite in order to validate the constructed modeling method. The proposed models enable the system engineers to calculate the overall system MTF and to determine the crucial design parameters that affect the image performance in the conceptual design phase of an observation satellite.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.98-103
• /
• 2005

The Flight Model of MAC (Medium-sized Aperture Camera), a 2.5m GSD class earth observation camera has been aligned and assembled. Topics discussed in this paper include the ground MTF performance of the MAC system, and the alignment of the focal plane assembly. MTF was measured by a knife-edge scanning technique, and a 450 mm diameter Cassegrain collimator with diffraction-limited performance was made and used for the MTF measurements. System MTF was used as the figure-of-merit to find the best focus of the focal plane assembly.

• Journal of the Korean earth science society
• /
• v.24 no.1
• /
• pp.7-21
• /
• 2003

The state-of-art third generation wave prediction model WAM was applied to the Korean seas for a winter monsoon period of January 1997. The wind field used in the present study is the global NSCAT-ERS/NCEP blended winds, which was further interpolated using a bi-cubic spline interpolator to fine grid limited area shallow water regime surrounding the Korean seas. To evaluate and investigate the accuracy of WAM, the hindcasted wave heights are compared with observed data from two shallow water buoys off Chil-Bal and Duk-Juk. A detailed study has been carried with the various meteorological parameters in observed buoy data and its inter-dependency on model computed wave fields was also investigated. The RMS error between the observation and model computed wave heights results to 0.489 for Chil-Bal and 0.417 for Duk-Juk. A similar comparison between the observation and interpolated winds off Duk-Juk show RMS error of 2.28 which suggest a good estimate for wave modelling studies.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.273-278
• /
• 2017

Recently, one of the areas where research is being actively conducted is the Internet of Things (IoT). The field of using the Internet of Things system is increasing, coupled with a remarkable increase of the use of the camera. However, general cameras used in the Internet of Things have limited viewing angles as compared to those available to the human eye. Also, cameras restrict observation of objects and the performance of observation. Therefore, in this paper, we propose a panoramic image stitching method using feature extraction and matching based on an embedded system. After extracting the feature of the image, the speed of image stitching is improved by reducing the amount of computation using the necessary information so that it can be used in the embedded system. Experimental results show that it is possible to improve the speed of feature matching and panoramic image stitching while generating a smooth image.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.99-107
• /
• 2006

People with visual impairments are difficult to go to education facility by themselves, because of their limited visual ability, orientation, and usability field, so they prefer dormitories. Those dormitories playa role in living space, education, communication and culture function. Therefore those facilities planned more user centered design, since they are influenced by user actability and their values. User centered designs that match between the user and space are understood as well as their characteristics and behavior. Especially for understanding their activity, observation is conducted about their behavior in dormitories. Thus the purpose of this study is suggested to be a basic source that planning about residential facility for people with visual impairments through interview and observation investigation by analysis that they resident in space motion and performance.