High energy electron beams took effect for tumor radio-therapy, however, had a lot of problems in clinical application because of various conversion factors and complication of physical reactions. Therefor, we had experimentally studied the important properties of high energy electron beams from the linear accelerator, LMR-13, installed in Yonsei Cancer Center. The results of experimental studies on the problems in the 8, 10, 12 Mev electron beam therapy were reported as following. 1. On the measurements of the outputs and absorbed doses, the ionization type dosimeters that had calibrated by $^{90}Sr$ standard source were suitable as under 3% errors for high energy electrons to measure, but measuring doses in small field sizes and the regions of rapid fall off dose with ionization chambers were difficult. 2. The electron energy were measured precisely with energy spectrometer consisted of magnet analyzer and tele-control detector and the practical electron energy was calculated under 5% errors by maximum range of high energy electron beam in the water. 3. The correcting factors of perturbated dose distributions owing to radiation field, energy and material of the treatment cone were checked and described systematically and variation of dose distributions due to inhomogeneous tissues and sloping skin surfaces were completely compensated. 4. The electron beams, using the scatterers; ie., gold, tin, copper, lead, aluminium foils, were adequately diffused and minimizing the bremsstrahlung X-ray induced by the electron energy, irradiation field size and material of scatterers, respectively. 5. Inproving of the dose distribution from the methods of pendulum, slit, grid and focusing irradiations, the therapeutic capacity with limited electron energy could be extended.
Purpose: Studies on the physiology of the transposed stomach as an esophageal substitute in the form of a gastric pull-up or a gastric tube in children are limited. We conducted a study of motility and the pH of gastric esophageal substitutes using manometry and 24-hour pH measurements in 10 such patients. Methods: Manometry and 24 hour pH studies were performed on 10 children aged 24 to 55 months who had undergone gastric esophageal replacement. Results: Six gastric tubes (4, isoperistaltic; 2, reverse gastric tubes) and 4 gastric pull-ups were studied. Two gastric tubes and 4 gastric pull-ups were transhiatal. Four gastric tubes were retrosternal. The mean of the lowest pH at the midpoint of the substitute was 4.0 (range, 2.8-5.0) and in the stomach remaining below the diaphragm was 3.3 (range, 1.9-4.2). In both types of substitute, the difference between the peak and the nadir pH recorded in the intra-thoracic and the sub-diaphragmatic portion of the stomach was statistically significant (p<0.05), with the pH in the portion below the diaphragm being lower. The lowest pH values in the substitute and in the remnant stomach were noted mainly in the evening hours whereas the highest pH was noted mainly in the morning hours. All the cases showed a simultaneous rise in the intra-cavitatory pressure along the substitute while swallowing. Conclusion: The study suggested a normal gastric circadian rhythm in the gastric esophageal substitute. Mass contractions occurred in response to swallowing. The substitute may be able to effectively clear contents.
본 논문에서는 많은 가스터빈 산업체 및 연구기관에서 연소불안정 현상과 관련된 변수들을 예측하기 위해 가장 보편적으로 이루어지고 있는 열음향 해석 모델에 대한 기술 소개 및 최근의 연구 동향을 분석하였다. 선형 시스템 해석을 통하여 연소 불안정이 발생하는 고유 주파수 및 불안정 초기 성장률의 예측이 가능하다. 이를 위하여 정의된 시스템에서의 음향파와 열발생율 섭동간의 선형 관계식을 선형 음향 이론으로부터 유도할 수 있고, 이 관계식의 해를 구하기 위해서 가장 중요한 부분은 화염 전달 함수로부터 n-${\tau}$ 함수를 구하여 열발생율 섭동 결과에 대한 정보를 얻는 것이다. 현재까지의 연구 결과로부터 선형 특성 해석에는 상당한 진보가 이루어져 왔고, 실제 가스터빈 연소기에 적용하는 노력이 있었으나, 한계 진폭과 과도기 현상 예측을 위해서 요구되는 비선형 동적 특성 모델링 기술 개발은 현재 간단한 연소기와 버너의 적용에 머물러 있는 실정이다. 실제 복잡한 가스터빈과 같은 연소 시스템에 적용되기 위해서는 비선형 경계 조건을 고려한 시스템 동적 특성 연구와 화염의 비선형 거동을 더욱 정확히 설명할 수 있는 전달 함수에 대한 예측 기술이 선행되어야 한다.
Compact Network Real-Time Kinematic (RTK) is a method that combines compact RTK and network RTK, and it can effectively reduce the time and spatial de-correlation errors. A network RTK user receives multiple correction information generated from reference stations that constitute a network, calculates correction information that is appropriate for one's own position through a proper combination method, and uses the information for the estimation of the position. This combination method is classified depending on the method for modeling the GPS error elements included in correction information, and the user position accuracy is affected by the accuracy of this modeling. Among the GPS error elements included in correction information, tropospheric delay is generally eliminated using a tropospheric model, and a combination method is then applied. In the case of a tropospheric model, the estimation accuracy varies depending on the meteorological condition, and thus eliminating the tropospheric delay of correction information using a tropospheric model is limited to a certain extent. In this study, correction information modeling accuracy performances were compared focusing on the Low-Order Surface Model (LSM), which models the GPS error elements included in correction information using a low-order surface, and a modified LSM method that considers tropospheric delay characteristics depending on altitude. Both of the two methods model GPS error elements in relation to altitude, but the second method reflects the characteristics of actual tropospheric delay depending on altitude. In this study, the final residual errors of user measurements were compared and analyzed using the correction information generated by the various methods mentioned above. For the performance comparison and analysis, various GPS actual measurement data were collected. The results indicated that the modified LSM method that considers actual tropospheric characteristics showed improved performance in terms of user measurement residual error and position domain residual error.
This paper discussed the assessment of hand of cotton fabrics by enzymatic hydrolysis. The subjective hand and preference of denim fabrics finished by enzymatic hydrolysis were evaluated using the scale developed. The factors affecting consumers taste for denim fabrics were analyzed by the statistical technique. The effects of enzymatic hydrolysis on the properties of cotton fabrics were also evaluated by subjective hand measurements. The results are as follow; As the weight loss increased, evaluators thought that fabrics become finer, smoother, softer, warmer and more refined, and the sense of durability is sleeker and weaker, and the sense of weight is more flexible, flossier, lighter, softer, thinner. They didnt catch the change of moisture related properties according to the rate of weight loss. They also thought fabrics became more elastic, and less wrinklier as the weight loss increased. As the weight loss increased, the fabric was more preferred. The limited weight loss which changes the preference from \"dislike\" to \"like\" was 12.87%. The most preferred fabric was that with 12.87% of weight loss. It is supposed that the preference of fabric was related to the terms such as \"sum-se-ha-da\"(섬세하다), \"mai-ku-rup-da\"(매끄럽다), \"yoo-yon-ha-da\"(유연하다), \"too-bak-ji-an-da\"(투박하지 않다), \"chom-chom-ha-da\"(촘촘하다), \"gil-ki-da\"(질기다), \"kun-juk-goe-ri-ji-an-da\"(끈적거리지 않다), \"ku-kim-i-ka-ji-an-nun-da\"(구김이 가지 않는다).
This presents the preliminary results from work in progress of a paired study of the acquisition of voiceless stops by Spanish speakers learning English, and American English speakers learning Spanish. For this study the hypothesis was that the American speakers would have no difficulty suppressing the aspiration in Spanish unaspirated stops; the Spanish speakers would have difficulty acquiring the aspiration necessary for English voiceless stops, according to Eckman's Markedness Differential Hypothesis. The null hypothesis was proved. All subjects were given the same set of disyllabic real words of English and Spanish in carrier phrases. The tokens analyzed in this report are limited to word-initial voiceless stops, followed by a low back vowel in stressed syllables. Tokens were randomized and then arranged in a list with the words appearing three separate times. Aspiration was measured from the burst to the onset of voicing(VOT). Both the first language (Ll) tokens and second language (L2) tokens were compared for each speaker and between the two groups of language speakers. Results indicate that the Spanish speakers, as a group, were able to reach the accepted target language VOT of English, but English speakers were not able to reach the accepted range for Spanish, in spite of statistically significant changes of p<.OOl by speakers in both groups of learners. A closer analysis of the speech samples revealed wide variability within the speech of native speakers of English. Not only is variability in English due to the wide range of VOT (120 msecs. for English labials, for example) but individual speakers showed different patterns. These results are revealing for the demands requied in experimental designs and the number of speakers and tokens requied for an adequate description of different languages. In addition, a simple report of means will not distinguish the speakers and the respective language learning situation; measurements must also include the RANGE of acceptability of VOT for phonetic segments. This has immediate consequences for the learning and teaching of foreign languages involving aspirated stops. In addition, the labelling of spoken language in speech technology is shown to be inadequate without a fuller mathematical description.
최근에는 T-ray(terahertz ray)를 이용한 비파괴기술이 새로운 분야로 주목을 받고 있다. 본 연구에서는 FRP 복합재료의 내재결함이나 레이업(lay-up) 특성을 검사 및 평가하기 위한 T-ray 시간영역 분광기(time-domain spectroscopy)를 활용하였으며 또한 이 T-ray 분광기의 일반적인 반사 및 투과모드를 이용하여 T-ray 이미지를 구현하였다. 특히, 2개의 톱날 인공결함이 내재한 GFRP 복합재의 평가방법을 제시하였다. CFRP 복합재료에 대해서는 T-ray 전파는 탄소섬유로 인해 진행 장해를 받는다. 이에 따라 T-ray의 전기장(E-field)의 방향과 탄소섬유 방향의 의존성을 분석하였다. 한편 인공결함인 알루미늄 테이프, 박리, 충격손상, 이물혼입 등을 T-ray를 이용하여 비파괴 검사 및 평가하였다. 이를 통해 FRP 복합재료의 T-ray비파괴평가의 적용 가능성 및 한계 등을 확인 할 수 있었다.
In hot strip rolling, a capability for precisely predicting roll force is crucial for sound process control. In the past, on-line prediction models have been developed mostly on the basis of Orowan's theory and its variation. However, the range of process conditions in which desired prediction accuracy could be achieved was rather limited, mainly due to many simplifying assumptions inherent to Orowan's theory. As far as the prediction accuracy is concerned, a rigorously formulated finite element(FE) process model is perhaps the best choice. However, a FE process model in general requires a large CPU time, rendering itself inadequate for on-line purpose. In this report, we present a FE-based on-line prediction model applicable to precision process control in a finishing mill(FM). Described was an integrated FE process model capable of revealing the detailed aspects of the thermo-mechanical behavior of the roll-strip system. Using the FE process model, a series of process simulation was conducted to investigate the effect of diverse process variables on some selected non-dimensional parameters characterizing the thermo-mechanical behavior of the strip. Then, it was shown that an on-line model for the prediction of roll force could be derived on the basis of these parameters. The prediction accuracy of the proposed model was examined through comparison with measurements from the hot strip mill.
본 논문에서는 굴착 및 가시설 설치로 인한 기존 지하철 터널 라이닝에 발생되는 균열에 대한 모니터링과 분석을 실시하였다. 균열은 터널의 확폭부 근처에서 발생하였다. 균열 게이지, 내부변위계, 3D레이저 스캐너 같은 여러 계측 장비들은 발생된 균열과 균열이 터널에 미치는 영향에 대해 모니터링 하기 위해 설치되었다. 라이닝의 변형과 균열의 추가적인 확장 상태를 파악하기 위하여 균열 게이지와 내부변위계로 현장 계측을 실시하였다. 전체적인 변상 평가를 위하여 3D 레이저 스캐너를 활용하였다. 스캐너 데이터로부터 터널과 철도의 전체적인 변상 상태를 평가하였다. 지하 공사시 지반의 불연속성으로 인해 균열확장의 정확한 변형을 측정하는 것은 어려운 일이다. 본 논문에서는 터널 라이닝의 변형과 레일에 미치는 영향에 대하여 기존 계측방법과 전체적인 변상 상태에 대하여 분석하였다.
Discomfort as well as muscular pain and musculoskeletal diseases occur in cases of stressed posture due to prolonged pressure. Therefore, the American Academy of Orthopaedic Surgeons (AAOS) and Pediatric Orthopaedic Society of North America (POSNA) recommend that bags that weigh no more than 15 - 20% of the wearer's weight. However, despite the prolonged pressure from using baby carriers, there are no recommendations and limited studies on how to protect wearers. Therefore, this study investigates subjective fatigue according to the usage of waist support and hip seat. Based on this, muscle fatigue and secondary subjective fatigue according to three types of currently commercial baby carriers (X-type, H-type, and H-hip type) were measured. Subjective comfortability was evaluated on a 5 point Likert-scale and subjective fatigue was evaluated on Borg's CR-10 scale. Objective muscle fatigue was also compared by measuring and analyzing electromyogram (EMG). The results of primary subjective fatigue showed statistically significant changes in the shoulders, waist, calves, and soles of the feet according to the usage of hip seats and waist support. Electromyogram measurements also showed less muscle fatigue at the upper trapezius muscle and thoracic erector spine muscle for the H-hip seat baby carrier, which has both waist support and hip seat, compared to an X-type baby carrier, which has neither. However, results of subjective fatigue showed opposite results at the waist despite having same results at the shoulders and beneath the shoulders. This show discrepancies between objective muscle fatigue and subjective fatigue; therefore, that both aspects must be taken into consideration when developing ergonomic baby carriers.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.