• Asian Journal of Atmospheric Environment
• /
• 제6권2호
• /
• pp.111-117
• /
• 2012

To establish area specific control strategy for ambient ozone in the Seoul Metropolitan Area (SMA), the maximum ozone concentration in each local government district in the SMA were estimated by using the OZone Isopleth Plotting Package for Research (OZIPR) model. The modeling period was June 2000 and the emission inventory data used were from National Institute of Environmental Research (NIER). Except the islands of Incheon, whole Seoul and Incheon areas were volatile organic compounds (VOCs) limited, i.e., decreasing the oxides of nitrogen ($NO_X$) emission alone may increase the maximum ozone concentration upto certain point. In Gyeonggi, 12 areas were VOCs limited while 12 areas were in between VOCs limited and $NO_X$ limited, i.e., decreasing both $NO_X$ and VOCs emission may decrease the maximum ozone concentration. Majority of the estimated ozone values were lower than the measured values. The reason could be inaccuracy in emission inventories and/or transport from other areas. The same calculation was carried out for June 2004 and it was found that Seoul was still in the VOCs limited condition.

• Geophysics and Geophysical Exploration
• /
• 제20권3호
• /
• pp.163-175
• /
• 2017

In land seismic exploration, irregular surface topography and weathering layer in near surface distorts the reflected signals of data. Therefore, typical land seismic data should be compensated for this distortion by static correction. To perform the static correction, near-surface velocity is required, which can be obtained by seismic refraction survey. However, land seismic data is often acquired in a limited form of geometry depending on the equipment availability, accessibility condition, and permission for the survey site. In this situation, refraction analysis should be performed using reflection data because it is impossible to acquire refraction-oriented data due to limited source and receiver geometry. In this study, we aimed to analyze the reliability of the results obtained by refraction traveltime tomography when using reflection data with a limited number of sources and receivers from irregular surface topography. By comparing the inversion result from irregular topography with that from flat surface, we found that the surface topography affects the reliability of the inversion results to some degree. We also found that the number of sources has little effect on the inversion results unless the number of sources are very small. On the other hand, we observed that velocity distortion occurred in the overlapped part of receiver arrays when using a limited number of receivers, and therefore suggested the size of the least overlapping ratio to avoid the velocity distortion. Finally, we performed numerical tests for the model which simulates the surface topography and acquisition geometry of the survey region and verified the reliability analysis of inversion results. We identified reliable areas and suspicious area of the inverted velocity model by applying the analysis results to field data.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• 제23권4호
• /
• pp.6-11
• /
• 2015

In this study, we surveyed analysis of ADS-B ground trajectory data using non-aviation approval public data. For analysis used non-aviation public data and commercial ADS-B receiver. The study result is available using ADS-B ground trajectory data for airfield surveillance on limited range. Also, to confirmed of available using non-aviation public data for aviation research.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.282-287
• /
• 2021

A multicore system must be able to take full advantage of the program's instruction and data parallelism. This study introduces the data replication technique as a support technique to maximize the program's instruction and data parallelism. Instruction level parallelism can be limited by data dependency. In this case, if data is replicated to each processor core and used, instruction level parallelism can be used to the maximum. The technique proposed in this study can maximize the performance improvement effect when applied to scientific applications such as matrix multiplication operation.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.253-256
• /
• 2005

The use of satellite remote sensing in maritime safety and security can aid in the detection of illegal fishing activities and provide more efficient use of limited aircraft or patrol craft resources. In the area of vessel traffic monitoring for commercial vessels, Vessel Traffic Service (VTS) which use the ground-based radar system have some difficulties in detecting moving ships due to the limited detection range. A virtual vessel traffic control system is introduced to contribute to prevent a marine accident such as collision and stranding from happening. Existing VTS has its limit. The virtual vessel traffic control system consists of both data acquisition by satellite remote sensing and a simulation of traffic environment stress based on the satellite data, remotely sensed data. And it could be used to provide timely and detailed information about the marine safety, including the location, speed and direction of ships, and help us operate vessels safely and efficiently. If environmental stress values are simulated for the ship information derived from satellite data, proper actions can be taken to prevent accidents. Since optical sensor has a high spatial resolution, JERS satellite data are used to track ships and extract their information. We present an algorithm of automatic identification of ship size and velocity. This paper lastly introduce the field testing results of ship detection by RADARSAT SAR imagery, and propose a new approach for a Vessel Monitoring System(VMS), including VTS, and SAR combination service.

• Journal of Korea Multimedia Society
• /
• 제22권12호
• /
• pp.1385-1395
• /
• 2019

In this paper, we propose a method to fabricate a patient-specific breast implant using MRI images and 3D scan data. Existing breast implants for breast reconstruction surgery are primarily fabricated products for shaping, and among the limited types of implants, products similar to the patient's breast have been used. In fact, the larger the difference between the shape of the breast and the implant, the more frequent the postoperative side effects and the lower the satisfaction. Previous researches on the fabrication of patient-specific breast implants have used limited information based on only MRI images or on only 3D scan data. In this paper, we propose an algorithm for the fabrication of patient-specific breast implants that combines MRI images with 3D scan data, considering anatomical suitability for external shape, volume, and pectoral muscle. Experimental results show that we can produce precise breast implants using the proposed algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제6권3호
• /
• pp.452-458
• /
• 2002

Although the reuse of the cached data for scrolling the map reduces the amount of passed data between client and server, it needs the conversions of data coordinates, selertive deletion of objects and cache compaction at client. The conversion is time intensive operation due to limited resources of mobile phones such as low computing power, small memory. Therefore, for the efficient map control in the vector map service based mobile phone, it is necessary to study the method for reducing wireless network bandwidth and for overwhelming the limited resources of mobile phone as well. This paper proposes the methods for racking pre-received spatial objects in client-server systems for mobile CIS. We also analyze the strengths and drawbacks between the reuse of cached data and transmission of raw data respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.201-204
• /
• 2002

Although the reuse of the cached data for scrolling the map reduces the amount of passed data between client and server, it needs the conversions of data coordinates, selective deletion of objects and cache compaction at client. The conversion is time intensive operation due to limited resources of mobile phones such as low computing power, small memory. Therefore, for the efficient map control in the vector map service based mobile phone, it is necessary to study the method for reducing wireless network bandwidth and for overwhelming the limited resources of mobile phone as well. This paper proposes the methods for caching pre-received spatial objects in client-server systems for mobile GIS. We also analyze the strengths and drawbacks between the reuse of cached data and transmission of raw data respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제22권9호
• /
• pp.2074-2079
• /
• 1997

Much recent work has been done in the two related areas of source coding for data compression, and channel coding for data storage, respectively. We propose two (0, k) run-lengh limited(RLL) data compression codes for the storage that combine source and channel coding. It was shown that the propsoed codes approach the maximum code rate of (0, k) code as k increase. Thus, the overall code rate of storage system can be increased by using the combined source/channel coding as compared to the conventional 8/9 code which is popular in hard drive systems Functhermore, one can also reduce the complexity of modulation coding procedure by using already RLL constrained data.

• Physical Therapy Korea
• /
• 제23권2호
• /
• pp.93-99
• /
• 2016

Background: Parametric statistical procedures are typically conducted under the condition in which a sample distribution is statistically identical with its population. In reality, investigators use inferential statistics to estimate parameters based on the sample drawn because population distributions are unknown. The uncertainty of limited data from the sample such as lack of sample size may be a challenge in most rehabilitation studies. Objects: The purpose of this study is to review the bootstrapping method to overcome shortcomings of limited sample size in rehabilitation studies. Methods: Articles were reviewed. Results: Bootstrapping method is a statistical procedure that permits the iterative re-sampling with replacement from a sample when the population distribution is unknown. This statistical procedure is to enhance the representativeness of the population being studied and to determine estimates of the parameters when sample size are too limited to generalize the study outcome to target population. The bootstrapping method would overcome limitations such as type II error resulting from small sample sizes. An application on a typical data of a study represented how to deal with challenges of estimating a parameter from small sample size and enhance the uncertainty with optimal confidence intervals and levels. Conclusion: Bootstrapping method may be an effective statistical procedure reducing the standard error of population parameters under the condition requiring both acceptable confidence intervals and confidence level (i.e., p=.05).