• International Journal of Automotive Technology
• /
• v.1 no.1
• /
• pp.9-16
• /
• 2000

The growing concerns on environmental protection have been constantly demanding cleaner and more energy efficient vehicles without compromising any conveniences provided by the conventional vehicles. The recent significant advances in proton-exchange-membrane (PEM) fuel cell technology have shown the possibility of developing such vehicles powered by fuel cells. Several prototype fuel cell electric vehicles (FCEV) have been already developed by several major automotive manufactures, and all of the favorable features have been demonstrated in the public roads. FCEV is essentially a zero emission vehicle and allows to overcome the range limitation of the current battery electric vehicles. Being motivated by the laboratory and field demonstrations of the fuel cell technologies, variety of fuel cell alliances between fuel cell developers, automotive manufactures, petroleum companies and government agencies have been formed to expedite the realization of commercially viable FCEV. However, there still remain major issues that need to be overcome before it can be fully accepted by consumers. This paper describes the current fuel cell vehicle development status and the staggering challenges for the successful introduction of consumer acceptable FCEVS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.3
• /
• pp.9-18
• /
• 1995

The substitution of conventional fuel oil by alternative fuels is of immense interest due to liquid oil shortage and requirements of emission control standard. Among the alternative fuels, natural gas may be the most rational fuel, because of its widespread resource and clean est burning. Meanwhile, engine simulation is of great importance in engine development. Hence a zero-dimensional combustion model was developed for dual-fuel system. Natural gas was injected directly into the cylinder and small amount of distillate was used to provide the ignition kernel for natural gas burning. The intake air and exhaust gas flow was modeled by filling and emptying method. Although the single zone approach has an inherent limitation, the model showed promise as a predictive tool for engine performance. Its simulation was also made to see how the engine performance was influenced by the fuel injection timings and amount of each fuel.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.29-33
• /
• 1996

This paper addresses a systematic way of understanding the transfer characteristics of whole-body vibration due to the external excitation. Amirouche's and Tamaoki's models are considered, whose analysis shows a new result that resonant frequencies related to the head vibration are well coincided with those of the body. This point reveals that the improvement of the ride quality of passenger cars can be achieved by isolating only external vibration components transfered to the body. Finally, this paper points out the limitation of previous whole-body vibration models, which gives the motivations of setting up more 'practical and generalized' whole-body vibration models of interests in this study.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.164-169
• /
• 2005

Microphone array techniques are being used widely in wind tunnel measurements for identification of the distributed aerodynamic noise sources on the model being tested. Depending on the frequencies and sound levels, conventional beamforming algorithm has limitation in separating two adjacent sources. Several modifications to the classical beamforming have been developed to enhance way resolution and reduce sidelobe levels. In this Paper the robust adaptive beamforming and the CLEAN algorithm are used to compare to the result of conventional beamforming method. It is found that the CLEAN algorithm is capable of pin-pointing locations of multiple sources nearby, while these sources are unidentifiable with robust adaptive or conventional beamforming techniques.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.516-522
• /
• 2009

This paper proposes a new haptic cue vehicle accelerator pedal device using magnetorheological(MR) brake. As a first step, an MR fluid-based haptic cue device is devised to be capable of rotary motion of accelerator pedal. Under consideration of spatial limitation, design parameters are optimally determined to maximize control torque using finite element method. The proposed haptic cue device is then manufactured and integrated with accelerator pedal. Its field-dependant torque is experimentally evaluated. Vehicle system emulating gear shifting and engine speed is constructed in virtual environment and communicated with the haptic cue device. Haptic cue algorithm using the feed-forward control algorithm is formulated to achieve optimal gear shifting in driving. Control performances are experimentally evaluated via feed-forward control strategy and presented in time domain.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.387-392
• /
• 2007

The paper presents control performance of a magnetorheological (MR) fluid-based haptic knob which is applicable to invehicle comfort functions. As a first step, MR fluid-based haptic knob is devised to be capable of both rotary and push motions with a single device. Under consideration of spatial limitation, design parameters are optimally determined to minimize a reciprocal of control torque using finite element analysis. The proposed haptic knob is then manufactured and its fielddependent torque is experimentally evaluated. Subsequently, in-vehicle comfort functions are constructed in virtual environment and make them communicate with the haptic knob. Control performances such as reflection force are experimentally evaluated via simple feed-forward control strategy.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.3
• /
• pp.307-314
• /
• 2008

The paper presents control performance of a magnetorheological(MR) fluid-based haptic knob which is applicable to in-vehicle comfort functions. As a first step, MR fluid-based haptic knob is devised to be capable of both rotary and push motions with a single device. Under consideration of spatial limitation, design parameters are optimally determined to minimize a reciprocal of control torque using finite element analysis. The proposed haptic knob is then manufactured and its field-dependent torque is experimentally evaluated. Subsequently, in-vehicle comfort functions are constructed in virtual environment and make them communicate with the haptic knob. Control performances such as reflection force are experimentally evaluated via simple feed-forward control strategy.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.116-130
• /
• 2003

The gap-based SERVQUAL model is a popular service quality determinant due to its superior diagnostic capacity over alternative explanatory frameworks. However, some researchers criticize the performance of the SERVQUAL model and propose alternative service Quality measurement constructs. Nevertheless, it is argued that the superior diagnostic capacity of SERVQUAL is its key strength; and that any criticism made of it when making comparison with alternative models does not reflect the differing nature of scales of statistical analysis. Arguably, the only limitation of a gap-based model is misinterpretation of customers' evaluation and perception of a service. In this research, the gap score is transformed into a ratio score. Also, empirical tests and implications are presented to support this alternative contribution to the body of knowledge.

• Tunnel and Underground Space
• /
• v.8 no.1
• /
• pp.17-25
• /
• 1998

This paper investigates coupled thermal, mechanical and hydraulic phenomena in deep rock mass especially for underground heat storage system. Firstly, concepts of underground heat storage were presented and coupling phenomena in this area were illustrated. In order to understand the basic mechanism of thermal, hydraulic and deformation behavior in rock cavern disturbed by thermal gradient about 10$0^{\circ}C$, various numerical experiments were conducted using several codes. The study involves the behavior of fractured rock mass including rock joint. In spite of the limitation of codes modelling fully coupled effects, these codes could be applied in analysis of underground heat storage. The heat loss in rock mass, which is a major factor in heat storage, is insignificant in all results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.616-619
• /
• 2002

Spin casting is one of useful methods to manufacture metal parts with low mold cost and short delivery time. But the silicon rubber based conventional method has several problems such as poor dimensional accuracy, limitation in casting materials and its dependency on speciality in meld making process. To solve those problems, this paper suggests a steel based mold making method using direct CNC machining and the experimental results shows that the parts from the developed method has better dimensional accuracy and surface roughness than those from the conventional method.