• 제목/요약/키워드: limit index

검색결과 601건 처리시간 0.024초

한반도의 곰솔분포에 관한 연구 (A Study on the Distribution of Pinus thunbergii in the Korean Peninsula)

  • Kim, Jung Un;Bong-Seop Kil
    • The Korean Journal of Ecology
    • /
    • 제6권1호
    • /
    • pp.45-54
    • /
    • 1983
  • A distribution map of black pine, Pinus thunbergii, in south Korea was prepared through field surveys. According to Mirov(1967), the range of black pine is limited in east Asia, Japan and Korea; its northern limit is at about 41。34' north and its southern limit on Takara island, south Kyushu, at 29。 north. According to the present map, its northern limit coincided with the isopath of warmth index 100 by Yim(1977). The density of pine in grid mesh, about 4 km * 4 km, was higher at costal area than that in inland area, and it was also higher at sea side slope than the opposite slope of the same mountain. This suggests that the ecological distribution of black pine is greatly affected by salt content of the soil or the optimal range of summed temperature for the pine growth.

  • PDF

변동성지수와 관리도를 이용한 KOSPI200 지수선물 투자전략 (Investment Strategies for KOSPI200 Index Futures Using VKOSPI and Control Chart)

  • 유재필;신현준
    • 대한산업공학회지
    • /
    • 제38권4호
    • /
    • pp.237-243
    • /
    • 2012
  • This paper proposes quantitative investment strategies for KOSPI200 index futures using VKOSPI and control chart. Stochastic control chart is employed to decide when to take a position as well as what position out of long and short should be taken by monitoring whether VKOSPI or difference of VKOSPI touches the control limit lines. The strategies include 4 approaches, which are traditional control chart and 2-Area control chart coupled with VKOSPI and its difference, respectively. Computational experiments using real KOSPI200 futures index for recent 3 years are conducted to show the excellence of the proposed investment strategies under control chart framework.

고함수비를 가진 준설토의 압밀특성 (Consolidation Characteristics of Dredged Soil with High Water Content)

  • 주재우;정규향;김영규
    • 한국농공학회지
    • /
    • 제45권5호
    • /
    • pp.133-139
    • /
    • 2003
  • Dredged soil from sea has much higher water content than liquid limit of clay and even if small loads apply, it will suffer a great settlement. Therefore it is very difficult to perform a consolidation test with general consolidation apparatus because of high water content. In this study Rowe Cell Apparatus consolidation tests have been performed with 1 remolding clay of water content 56% and 4 slurry clays of a water content of 100%, 120%, 133% and 150%. From the test results the consolidation characteristics such as compression index, secondary compression index and consolidation coefficient have been investigated with a variation of water content of dredged soil. The equations to get consolidation constants such as a compression index, a consolidation coefficient have been proposed with the field water content.

EJB 2.0과 EJB 3.0의 소프트웨어 개발 생산성 비교 연구 (A Study on Comparison of Software Development Productivity with EJB 2.0 and EJB 3.0)

  • 이명호
    • 산업경영시스템학회지
    • /
    • 제31권3호
    • /
    • pp.1-7
    • /
    • 2008
  • This paper proposes an object-oriented software development guidance and an evaluation index for the productivity related to EJB(Enterprise JavaBeans). EJB is a known successful standard model for LSDO(Large Size Distributed Object). However, there is no comparison research about the performance of EJB 2.0 and 3.0 with same identical platform. Quantitative analysis is supported as a part of LOC(Line Of Code) analysis. There is a limit to develop the updated software with no the specific evaluating index for the productivity of software. This work proposes an specific index for evaluating the productivity of new version EJB on a platform. Base on the result, the specific guidance of the developing software is obtained.

평면뼈대구조의 신뢰성해석에 관한연구 (A study on Reliability Analysis for Plane Frame Structure)

  • 이중빈;신형우
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1989년도 가을 학술발표회 논문집
    • /
    • pp.34-39
    • /
    • 1989
  • Recent trends in design standards development have encouraged the use of probabilistic limit sate design concepts. Reliability analysis adopted in those advanced countries have the potentials that they afford for symplifying the design Process arid placing it on a consistent reliability based for various construction materials. This study is proposed in the reliability analysis of plane frame structures using second-order moment method(Level-II they). Lind-Hasofer's minimum distance method is use in the derivation of an mathematical algorithm as well as an determination of Correlation cofficients, reliability index and total reliability index depending on the multiple failure modes. In addition. This study is employed as a practical tool for the approximate reliability analysis. Results of the numerincal analysis showed that the difference between the reliability index of the failure probability of the multiple failure modes and the total reliability index of the failure probability with the simultaneous failure modes deviated nearly 3∼10% depending on tile performance functions.

  • PDF

남해안 매립 해성점토의 물리적 특성과 압축지수의 상관성 분석 (Correlation Analysis between Physical Properties and Compression Index for Dredged and Reclaimed Marine Clay in the Southern Coast of Korea)

  • 임석훈;유남재
    • 산업기술연구
    • /
    • 제34권
    • /
    • pp.53-59
    • /
    • 2014
  • The single regression method was used to analyze the correlationship between the compression index with mechanical properties for reclaimed marine clays in the southern coast of Korea. As results of performing regression analysis for 200 samples about reclaimed marine clays in the southern coast of Korea, linear regression lines between compression index and natural water content, void ratio in situ, and liquid limit respectively wer obtained. The changed properties of soil due to disturbance during dredging and reclaiming could be investigated by comparing with the existing empirical correlation equations for the original ground where dredging was performed. These regression equations might be rationally used in the preliminary evaluation of settlement of dredged and reclaimed marine clayey ground in the southern coast of Korea.

  • PDF

A Modified Target Costing Technique to Improve Product Quality from Cost Consideration

  • Wu, Hsin-Hung
    • International Journal of Quality Innovation
    • /
    • 제6권2호
    • /
    • pp.31-45
    • /
    • 2005
  • The target costing technique, mathematically discussed by Sauers, only uses the $C_p$ index along with Taguchi loss function and ${\bar{X}}-R$ control charts to set up goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p$ value to ${\bar{X}}-R$ control charts to obtain goal control limits. This study further considers the reflected normal loss function as well as the $C_{pk}$ index along with its lower confidence interval in forming goal control limits. With the use of lower confidence interval to replace the point estimator of the $C_{pk}$ index and reflected normal loss function proposed by Spiring to measure the loss to society, this modified and improved target costing technique would become more robust and applicable in practice. Finally, an example is provided to illustrate how this modified and improved target costing technique works.

Reliability analysis of shallow tunnel with surface settlement

  • Yang, X.L.;Li, W.T.
    • Geomechanics and Engineering
    • /
    • 제12권2호
    • /
    • pp.313-326
    • /
    • 2017
  • Based on the reliability theory and limit analysis method, the roof stability of a shallow tunnel is investigated under the condition of surface settlement. Nonlinear Hoek-Brown failure criterion is adopted in the present analysis. With the consideration of surface settlement, the internal energy and external work are calculated. Equating the rate of energy dissipation to the external rate of work, the expression of support pressure is derived. With the help of variational approach, a performance function is proposed to reliability analysis. Improved response surface method is used to calculate the Hasofer-Lind reliability index and the failure probability. In order to assess the validity of the present results, Monte-Carlo simulation is performed to examine the correctness. Sensitivity analysis is used to estimate the influence of different variables on reliability index. Among random variables, the unit weight significantly affects the reliability index. It is found that the greater coefficient of variation of variables lead to the higher failure probability. On the basis of the discussions, the reliability-based design is achieved to calculate the required tunnel support pressure under different situations when the target reliability index is obtained.

신경망을 이용한 S&P 500 주가지수 선물거래 (S & P 500 Stock Index' Futures Trading with Neural Networks)

  • Park, Jae-Hwa
    • 지능정보연구
    • /
    • 제2권2호
    • /
    • pp.43-54
    • /
    • 1996
  • Financial markets are operating 24 hours a day throughout the world and interrelated in increasingly complex ways. Telecommunications and computer networks tie together markets in the from of electronic entities. Financial practitioners are inundated with an ever larger stream of data, produced by the rise of sophisticated database technologies, on the rising number of market instruments. As conventional analytic techniques reach their limit in recognizing data patterns, financial firms and institutions find neural network techniques to solve this complex task. Neural networks have found an important niche in financial a, pp.ications. We a, pp.y neural networks to Standard and Poor's (S&P) 500 stock index futures trading to predict the futures marker behavior. The results through experiments with a commercial neural, network software do su, pp.rt future use of neural networks in S&P 500 stock index futures trading.

  • PDF

A HYPOTHESIS TESTING PROCEDURE OF ASSESSMENT FOR THE LIFETIME PERFORMANCE INDEX UNDER A GENERAL CLASS OF INVERSE EXPONENTIATED DISTRIBUTIONS WITH PROGRESSIVE TYPE I INTERVAL CENSORING

  • KAYAL, TANMAY;TRIPATHI, YOGESH MANI;WU, SHU-FEI
    • Journal of applied mathematics & informatics
    • /
    • 제37권1_2호
    • /
    • pp.105-121
    • /
    • 2019
  • One of the main objective of manufacturing industries is to assess the capability performance of different processes. In this paper, we use the lifetime performance index $C_L$ as a criterion to measure larger-the-better type quality characteristic for evaluating the product performance. The lifetimes of products are assumed to follow a general class of inverted exponentiated distributions. We use maximum likelihood estimator to estimate the lifetime performance index under the assumption that data are progressive type I interval censored. We also obtain asymptotic distribution of this estimator. Based on this estimator, a new hypothesis testing procedure is developed with respect to a given lower specification limit. Finally, two numerical examples are discussed in support of the proposed testing procedure.