• Physical Therapy Rehabilitation Science
• /
• v.6 no.2
• /
• pp.90-95
• /
• 2017

Objective: The purpose of this study was to investigate the physical therapists' perception of the use of gait measures, the frequency of the gait measures used, and also to identify the barriers that limit the use of these assessment tools. Design: Cross-sectional study. Methods: Physical therapists from the Seoul, Gyeonggi area from March to July 2016 were included in the study. Over the course of 18 weeks, a cross-sectional study was conducted with a self-report questionnaire. A total of 700 questionnaires were distributed and 350 questionnaires (50%) were collected, however with the exclusion of 140 questionnaires due to non-consent, a total of 210 questionnaires (30%) were analysed. Results: Out of the 10 standardized assessment tools, the therapists showed the highest perception for the timed up and go test (TUG [n=153, 72.9%]) and they also had high perception for the 10 meters walk test (10MWT [n=149, 71.0%]), and 6-minute walk test (6MWT [n=123, 58.6%]). The respondents answered that the TUG (n=116, 55.2%), 10MWT (n=100, 47.6%), and 6MWT (n=51, 24.3%) was used the most often. On the contrary, only four (1.9%) therapists have used the Chedoke-McMaster stroke assessment and the Rivermead Mobility Index. The lack of time was considered as the most important barrier to the use of assessment tools in clinical practice. Conclusions: Through this study, it has been shown that the domestic physical therapists used the TUG and the 10MWT mainly due to high recognition and evaluation status; however, the lack of time was the greatest impediment to the clinical application of the gait assessment tools.

• Journal of the Korean Geographical Society
• /
• v.38 no.1
• /
• pp.16-31
• /
• 2003

The water quality environment in Youngsan and Seumjin river basins was investigated based on the concept of the comprehensive Water Quality Index (WQI) and a spacial pollution source. Artificial factors influencing to river water quality have been analyzed. The specific delivery load of Youngsan river basin was found to be 8.34~97.25 kg/day/$\textrm{km}^2$, Gomagwon stream and Gwangju stream showed the relatively high rates as 97.25 kg/day/$\textrm{km}^2$ and 86.06 kg/day/$\textrm{km}^2$, respectively. The specific delivery load in Seumjin river basin was estimated to be 10.98∼19.51 kg/day/$\textrm{km}^2$, Suggesting no Significant Contribution of pollution. WQI of Youngsan watershed revealed 1.36~3.45, whereas Seumjin watershed showed a relatively low value of 0.5~1.47 And it is concluded that the specific delivery load suggested in this study provides the essential core data of the upper limit of pollutants receptor in the watershed area studied. From this study, it is suggested that the integrated environmental management of river basin requires the analysis of pollutants generation rate of the basin and the receptor capability for the self-purification.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.105-114
• /
• 2004

Consolidation characteristics have been investigated by using Rowe cell consolidation tester for dredged soil, which is more than two times as much as the liquid limit. To examine the effects of variation of water content on consolidation characteristic, tests were carried out varying the initial water content from $100\%\;to\;150\%.$ The results were compared with the consolidation characteristics of remolded clay. The test results showed that the hither the initial water content of dredged clay was, the more noticeable the non-linear behavior of e-log P curves occurred. The variation of the gradient was apparent to load stage 40kPa and became less apparent after load stage 80kPa on the e-log P curves. Ratio of compression index stayed within the range suggested by Mesri and variation of initial water content has hardly influenced the coefficient of consolidation. On the contrary, it was found that the magnitude of consolidation load affects the vertical coefficient of consolidation. The variation of stratum thickness during consolidation processing needs to be taken into consideration since hydraulic fill would go through a much larger scale strain than land soil when it is subject to a load. In this study, the consolidation period considering the variation of stratum thickness was analyzed and the results were compared with those of existing consolidation studies which did not consider the variation of stratum thickness. According to the results of the study, the consolidation period of the ground with a larger strain was calculated more close to observed value in case of Mikasa theory which takes the variation of stratum thickness into consideration.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.11
• /
• pp.51-60
• /
• 2014

Load and Resistance Factor Design (LRFD) is one of the limit state design methods, and has been used worldwide, especially in North America. Also, the study for LRFD has been actively conducted in Korea. However, the data for LRFD in Korea were not sufficient, so resistance factors suggested by AASTTO have been used for the design in Korea. But the resistance factors suggested by AASHTO represent the characteristics of bedrocks defined in the US, therefore, it is necessary to determine the resistance factors for designs in Korea, which can reflect the characteristics of bedrocks in Korea. Also, the calculated probabilities of failure from conventional reliability analyses which commonly use log-normal distribution are not realistic because of the lower tail that can be extended to zero. Therefore, it is necessary to calibrate the resistance factors considering the lower-bound resistance. Thus, this study calculates the resistance factors using thirteen sets of drilled shaft load test results, and then calibrates the resistance factors considering the lower-bound resistance corresponding to a target reliability index of 3.0. As a result, resistance factors from conventional reliability analyses were determined in the range of 0.13-0.32 for the shaft resistance, and 0.19-0.29 for the base resistance, respectively. Also, the lower bounds of resistance were determined based on the Hoek-Brown failure criteria (2002) and GSI downgrading. Considering the lower-bound resistances, resistance factors increased by 0~8% for the shaft, and 0~13% for the base, respectively.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2009

This study aims to provide preliminary data needed for establishing policies on the environment and disasters of Goryeong county. The main results are as follows. First, the present master plan of the region does not reflect local socio-economic and environmental conditions and the local people's opinion. Second, The air conditions of Gyeongbuk province and Goryeong county are within the permitted limit of air pollution of Korea. Third, the analysis of water pollution index in Nakdong river system shows improvement of water quality in both Andong and Goryeong. Fourth, the conditions of waste collection and disposal are improved in both Gyeongbuk province and Goryeong county. Fifth, in case of environmental pollutant emitting facilities of Gyeongbuk province, the proportion of 1st to 4th grade(relatively much more environmental pollutant emitting quantity than 5th grade) tends to be increasing. Sixth, environmental pollutant emitting facilities of Goryeong county are remarkably increasing in Dasan, Gaegin, Ssangrim, involving industrial complex. Finally, in case of disasters, it is relatively stable in Yecheon, Gumi, Uiseong, Yeongju and Cheongdo, while relatively unstable in Seongju, Gunwi, Yeongcheon, Chilgok, Mungyeong, Bonghwa and Goryeong.

• The Korean Journal of Nuclear Medicine
• /
• v.21 no.2
• /
• pp.133-141
• /
• 1987

To evaluate the values of the thyroid autoantibody measured by radioimmunoassay (RIA) and compare it with hemagglutination method (HA) in the normal and the thyroid disease, data were obtained from total 618 persons; 236 healthy persons, 217 patients with Graves' disease (including 113 patients with undertreated Graves' disease), 100 Hashimoto's disease, 31 thyroid nodule, and 34 simple goiter. RSR kit made in England was used and could be detected to at least 3 U/ml. The positive rates of normal group were antimicrosomal antibody (AMA) 31.8%, antithyroglobulin antibody (ATA) 44.5% by RIA and there was no considerable change in sex and age distribution. In Graves' disease, the positive rates of AMA and ATA were 90.4, 76.9% by RIA, 85, 39% by HA. In Hashimoto's disease, 94,91 % by RIA, and 87,48% by HA, respectively. The autoantibody titer by RIA in thyroid autoimmune disease as well as in normal group was more senisitive than that by HA, especially in ATA. There were linear relationships between the titer of RIA and that of HA in AMA of Graves' disease and AMA and ATA of Hashimoto's disease. There was no relationship among thyroid autoantibody, free $T_4$ index, TBII, and TSH. The titers of AMA and ATA were found to decrease in patients with Graves' disease during the course of antithyroid drug therapy. Of the 236 normal subjects, thirty-seven (15.7%) had concentrations of above 7.5 U/ml in AMA, forty. four (18.6%) above 9 U/ml in ATA. These values were considered as the upper limit for the normal range. In Graves' disease, 82.7, 53.8% were above 7.5, 9 U/ml, respectively; In Hashimoto's disease, 82, 79% were positive. We conclude that RIA was more sensitve than HA in measuring the thyoird autoantibody, but we will study further more for determining the normal range and its interpretation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.219-228
• /
• 2001

Objective : For the purpose of preparing the fundamental data and health promotion and control program on organic solvents in air of manufacturing industry. Methods : The author surveyed number of organic solvent components which was used in working site and also determined the organic solvents concentration in air of 927 manufacturing industries and 1,267 working process with gas chromatography(NIOSH manual) for five years from 1995 to 1999. Results : Mean number of solvents components by type of industry, working process was number of 12. There were exceeded to TLV of 1,2-dichloroethane in textile manufacturing industry N,N-dimethyl furan in tanning and dressing of leather ; luggage, handbags, saddlery, harness and footwear manufacturing industry and chemical and chemical product manufacturing industry by type of industry. There were exceeded to TLV of 1,2-dichloroethane in handwriting and drawing process, cellosolve in adhesive spreading process, N,N-dimethly furan in production of solvent process and adhesion process by working process Total exceeded rate to threshold limit values of organic solvents mixture were 12.9% for EI(Exposure index) and 10.0% for Em(Estimation of mixture) by type of industry, 11.3% for EI and 8.2% for Em by type of working process. The highest exceed rate was 36.7% for EI in tanning and dressing of leather ; luggage handbags, saddlery, harness and footwear manufacturing industry and 29.0% for Em in textile manufacturing industry. The highest exceeded rate was 23.1% for EI and 12.5% for Em in adhesive spreading process by working process. Mean values of total subjects by type of industry and type of working process were $0.7{\pm}1.8$ for EI and $0.7{\pm}1.7$ for Em respectively. Conclusions : As above results, the author suggest that it makes the environmental control program on 1.2-dichloroethane, N,N-dimethyl furan, cellosolve by kind of organic solvent and on textile manufacturing industry, tanning and dressing of leather ; luggage, handbags, saddlery harness and footwear manufacturing industry by type of industry, and on handwriting, drawing process and adhesive spreading process and adhesion process by type of working process.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.1-4
• /
• 2006

Method of analyzing sodium alginate in foods was developed using high performance liquid chromatography (HPLC). HPLC conditions for sodium alginate were: column, MCI GEL $(8\;mm\;i.d{\times}300\;mm)$; mobile phase, deionized water; detector, refractive index detection (sensitivity = 16). Separation of sodium alginate was achieved within 15 min. Sodium alginate showed good linear relationship at 0.1-2.0% range. Correlation coefficient of calibration curve for sodium alginate exceeded 0.999, and detection limit was 0.005%. Recovery rate of sodium alginate in wheat flour dough was 106.67%. This method was successfully applied to analyses of cereals, saccharides, and ice cream, etc. Sodium alginate was detected in chocolate, noodles, and kelp at 0-44.8% range.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.790-803
• /
• 2019

The dioctyl terephthalic acid (DOTP) process produces plastic plasticizers by esterification of terephthalic acid with powder in the form of octanol. In this study, the dust explosion characteristics of terephthalic acid directly injected into the manhole in the form of powder in the presence of flammable solvent or vapor in the reactor of this process were investigated. Dust particle size and particle size distribution dust characteristics were investigated, and pyrolysis characteristics of dust were investigated to estimate fire and explosion characteristics and ignition temperature. Also, the minimum ignition energy experiment was performed to evaluate the explosion sensitivity. As a result, the average particle size of terephthalic acid powder was $143.433{\mu}m$. From the thermal analysis carried out under these particle size and particle size distribution conditions, the ignition temperature of the dust was about $253^{\circ}C$. The lower explosive limit (LEL) of the terephthalic acid was determined to be $50g/m^3$. The minimum ignition energy (MIE) for explosion sensitivity is (10 < MIE < 300) mJ, and the estimated minimum ignition energy (Es) based on the ignition probability is 210 mJ. The maximum explosion pressure ($P_{max}$) and the maximum explosion pressure rise rate $({\frac{dP}{dt}})_{max}$ of terephthalic acid dust were 7.1 bar and 511 bar/s, respectively. The dust explosion index (Kst) was 139 mbar/s, corresponding to the dust explosion grade St 1.

• Tunnel and Underground Space
• /
• v.29 no.3
• /
• pp.172-183
• /
• 2019

The generalized Hoek-Brown (GHB) failure criterion developed by Hoek et al. (2002) is a nonlinear function which defines a stress condition at failure of rock mass. The relevant strength parameter values are systematically determined using the GSI value. Since GSI index is a value quantifying the condition of in-situ rock mass, the GHB criterion is a practical failure condition which can take into the consideration of in-situ rock mass quality. Considering that most rock mechanics engineers are familiar with the linear Mohr-Coulomb criterion and that many rock engineering softwares incorporate Mohr-Coulomb criterion, the equations for the equivalent friction angle and cohesion were also proposed along with the release of the GHB criterion. The proposed equations, however, fix the lower limit of the minor principal stress range, where the linear best-fitting is performed, with the tensile strength of the rock mass. Therefore, if the tensile stress is not expected in the domain of analysis, the calculated equivalent friction angle and cohesion based on the equations in Hoek et al. (2002) could be less accurate. In order to overcome this disadvantage of the existing equations for equivalent friction angle and cohesion, this study proposes the analytical formula which can calculate optimal equivalent friction angle and cohesion in any minor principal stress interval, and verified the accuracy of the derived formula.