• 천문학회지
• /
• 제38권2호
• /
• pp.161-164
• /
• 2005

We present a theoretical formalism by which the global and the local mass functions of dark matter substructures (dark subhalos) can be analytically estimated. The global subhalo mass function is defined to give the total number density of dark subhalos in the universe as a function of mass, while the local subhalo mass function counts only those sub halos included in one individual host halo. We develop our formalism by modifying the Press-Schechter theory to incorporate the followings: (i) the internal structure of dark halos; (ii) the correlations between the halos and the subhalos; (iii) the subhalo mass-loss effect driven by the tidal forces. We find that the resulting (cumulative) subhalo mass function is close to a power law with the slope of ${\~}$ -1, that the subhalos contribute approximately $10\%$ of the total mass, and that the tidal stripping effect changes the subhalo mass function self-similarly, all consistent with recent numerical detections.

• Journal of the Optical Society of Korea
• /
• 제14권3호
• /
• pp.228-234
• /
• 2010

This paper presents the joint characteristic function of the first- and second-order polarization-modedispersion (PMD) vectors in installed optical fibers that are almost linearly birefringent. The joint characteristic function is a Fourier transform of the joint probability density function of these PMD vectors. We regard the random fiber birefringence components as white Gaussian processes and use a Fokker-Planck method. In the limit of a large transmission distance, our joint characteristic function agrees with the previous joint characteristic function obtained for highly birefringent fibers. However, their differences can be noticeable for practical transmission distances.

• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.234-242
• /
• 1999

In this paper, a method for assessment of the anisotropic machined surfaces is proposed. Fractal dimension (FD) is calculated using structure function and an index of the anisotropy is obtained as a ratio of its maximum and minimum value. The upper limit of fractal region on the structure function is determined as the length of the lag where the autocorrelation function shows 20% of its maximum value. The model of the structure function is derived from that of the auto correlation function. And, it shows that the new method and the proposed index of anisotropy are useful.

• 한국인터넷방송통신학회논문지
• /
• 제15권6호
• /
• pp.291-296
• /
• 2015

주행 중인 차량의 타이어와 노면 사이에서 발생하는 랜덤성 초음파신호의 주기성을 검출하여 타이어의 손상을 분별하는 방법에 대하여 연구하였다. 잡음으로부터 타이어손상에 의한 유효한 펄스를 검출하기 위해 적응 임계치를 설정하는 방법을 제안하였고, 이를 위한 전처리로서 신호의 랜덤성을 감소시키는 저역통과필터를 사용하였다. 자동차의 속도에 따라 검출된 펄스의 시간간격을 밀도함수화하고 피크점의 시간을 측정하여 타이어 손상물질을 검출하는 방법을 제안하였다. 손상물질이 한 개이고, 주행속도가 50km/h, 80km/h, 100km/h 일 때, 시간밀도함수의 제 1 피크시간 측정결과는 각각 169.8ms, 97.9ms, 81.8ms로 주행속도에 따라 계산한 타이어 회전주기의 오차범위내로 측정되었으며, 한개 이상의 손상물질의 경우에는 각 피크시간의 합이 타이어 회전주기의 오차범위내로 측정되는 결과를 얻을 수 있었다.

• 산업경영시스템학회지
• /
• 제44권1호
• /
• pp.45-50
• /
• 2021

Machines and facilities are physically or chemically degenerated by continuous usage. The representative type of the degeneration is the wearing of tools, which results in the process mean shift. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore, a preventive maintenance is necessary at some point. The problem of determining the maintenance period (or wear limit) which minimizes the total cost is called the 'process mean shift problem'. The total cost includes three items: maintenance cost (or adjustment cost), non-conforming cost due to the non-conforming products, and quality loss cost due to the difference between the process target value and the product characteristic value among the conforming products. In this study, we set the production volume as a decreasing function rather than a constant. Also we treat the process variance as a function to the increasing wear rather than a constant. To the quality loss function, we adopted the Cpm+, which is the left and right asymmetric process capability index based on the process target value. These can more reflect the production site. In this study, we presented a more extensive maintenance model compared to previous studies, by integrating the items mentioned above. The objective equation of this model is the total cost per unit wear. The determining variables are the wear limit and the initial process setting position that minimize the objective equation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.285-288
• /
• 2009

The purpose of this study is to predict the forming limit diagram (FLD) of strain-rate sensitive materials on the basis of the Marciniak and Kuczynski (M-K) theory. The strain-rate effect is taken into consideration in such a way that the stress-strain curves for various strain-rates are inputted into the formulation as point data, not as curve-fitted models such as power function. Tensile tests and R-value tests were carried out at several levels of temperature and strain-rate from $25^{\circ}C$ to $300^{\circ}C$ and 0.16 to 0.00016/s, respectively to obtain the mechanical properties of AZ31B magnesium alloy sheet. The FLD of this material was experimentally obtained by limit dome height tests with the punch velocity of 0.1 and 1.0 mm/s at $250^{\circ}C$. The M-K theory-based FLD predicted using Yld2000-2d yield criterion was compared with the experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.1940-1949
• /
• 2015

This paper presents an Enhanced Particle Swarm Optimization (EPSO) to solve short-term hydrothermal scheduling (STHS) problem with non-convex fuel cost function and a variety of operational constraints related to hydro and thermal units. The operators of the conventional PSO are dynamically controlled using exponential functions for better exploration and exploitation of the search space. The overall methodology efficiently regulates the velocity of particles during their flight and results in substantial improvement in the conventional PSO. The effectiveness of the proposed method has been tested for STHS of two standard test generating systems while considering several operational constraints like system power balance constraints, power generation limit constraints, reservoir storage volume limit constraints, water discharge rate limit constraints, water dynamic balance constraints, initial and end reservoir storage volume limit constraints, valve-point loading effect, etc. The application results show that the proposed EPSO method is capable to solve the hard combinatorial constraint optimization problems very efficiently.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.577-588
• /
• 2016

Due to the uncertainties related to the flaw assessment parameters, such as flaw size, fracture toughness, loading spectrum and so on, the probability concept is preferred over deterministic one in flaw assessment. In this study, efforts have been made to develop the reliability based flaw assessment procedure which combines the flaw assessment procedure of BS7910 and first-and second-order reliability methods (FORM/SORM). Both crack length and depth of semi-elliptical surface crack at weld toe were handled as random variable whose probability distribution was defined as Gaussian with certain means and standard deviations. Then the limit state functions from static rupture and fatigue perspective were estimated using FORM and SORM in joint probability space of crack depth and length. The validity of predicted limit state functions were checked by comparing it with those obtained by Monte Carlo simulation. It was confirmed that the developed methodology worked perfectly in predicting the limit state functions without time-consuming Monte Carlo simulation.

• 전자공학회논문지SC
• /
• 제43권1호
• /
• pp.39-44
• /
• 2006

델타시그마 변환기에서 limit cycle 에 의한 패턴 노이즈 문제는 오래 동안 설계자들을 괴롭혀 온 문제이다. 델타시그마 변환기의 동작과 출력은 입력과 초기치에 의해 결정된다. 본 논문은 델타시그마 변환기의 구조에 따른 패턴잡음의 발생정도를 널리 쓰이는 네 가지 모델로 비교 하였다. 델타시그마 변환기 중 적분기형 과 공진기형의 차이와 부궤환 방식에 따른 차이를 비교 하였으며 그 결과는 적분기 형식의 증폭단을 사용하는 델타시그마 변환기가 패턴잡음을 적게 발생시키는 것으로 판명되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.453-458
• /
• 2001

Pipelines have the highest capacity and are the safest and the least environmentally disruptive way for gas or oil transmission. Recently, failures due to corrosion defects have become of major concern in maintaining pipeline integrity. A number of solutions have been developed for the assessment of remaining strength of corroded pipelines. However, these solutions are known to be dependent on material properties and pipeline geometries. In this paper, a Fitness-For-Purpose type limit load solution for corroded gas pipelines made of the X65 steel is proposed. For this purpose, a series of burst tests with various types of corrosion defects are performed. Finite element simulations are carried out to derive an appropriate failure criterion. And then, further, extensive finite element analyses are performed to obtain the FFP type limit load solution for corroded X65 gas pipelines as a function of defect depth, length and pipeline geometry. And also, a window based computer program far the assessment of corrosion defect, which is named as COPAP(COrroded Pipeline Assessment Program) has been developed on the basis of proposed limit load solution.