• Journal of Korean Society for Quality Management
• /
• v.47 no.4
• /
• pp.739-754
• /
• 2019

Purpose: The purpose of this paper is to develop a reliability estimation procedure for the underground gas pipeline in the presence of corrosion defects. Methods: Corrosion is one of the major causes of the gas pipeline failure. Several failure forms caused by corrosion have been studied. Among them, small leak and burst are considered in this paper. The composite failure of the two is defined by limit state function, and it is expressed with pipe parameters. Given a modified corrosion dataset, in order to obtain reliability estimations, the method of first order and second moment is adopted because of its simplicity. The computation processes are conducted with MATLAB coding. Results: According to numerical results, the probability of composite failure is affected by both small leak and burst. In particular, when corrosion depth stays at low level, it is consistent with the probability of burst failure. On the contrary, it is more influenced by the small leak failure as corrosion depth is increasing. In such case, the probability of composite failure is fast approaching to the safety limit. Conclusion: By considering the composite failure, more practical predictions of remaining life can be obtained. The proposed method is useful for maintenance planning of the underground gas pipeline.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.109-116
• /
• 1994

In this paper, various reliability analysis methods for calculating a probability of failure are investigated for their accuracy and efficiency. Crude Monte Carlo method is used as a basis for the comparison of various numerical results. For the sampling methods, Importance Sampling method and Directional Simulation method are considered for overcoming a drawback of Crude Monte Carlo method. For the approximate methods, conventional Rackwitz-Fiessler method. 3-parameter Chen-Lind method, and Rosenblatt transformation method are compared on the basis of First order reliability method. As a Second-order reliability method, Curvature-Fitting paraboloid method, Point-fitting paraboloid method, and Log-likelihood function method are explored in order to verify the accuracy of the reliability calculation results. These methods mentioned above would have some difficulty unless the limit state equation is expressed explicitly in terms of random design variables. Thus, there is a need to develop some general reliability methods for the case where an implicit limit state equation is given. For this purpose, Response surface method is used where the limit state equation is approximated by regression analysis of the response surface outcomes resulted from the structural analysis. From the application of these various reliability methods to three examples, it is found that Directional Simulation method and Response Surface method are very efficient and recommendable for the general reliability analysis problem cases.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.4
• /
• pp.171-187
• /
• 2008

Objectives : The purpose of this study was to investigate the effects of modified fasting therapy on body composition, blood cell count and blood chemistry in inpatients. Methods : The modified fasting therapy program consists of three phases, a period of reducing food intakes, fasting and refeeding. Body weight, body composition, and the degree of obesity were estimated in before fasting therapy and after refeeding. Blood cell count and blood chemistry were estimated in before fasting therapy, before refeeding and after refeeding. Results : After modified fasting therapy, body weight, body fat mass, percent body fat, body mass index(BMI), body matabolic rate(BMR) and muscle mass was decreased significantly. WBC count and platelet count decreased significantly, RBC count and hemoglobin increased significantly and hematocrit was not changed significantly but within normal limit. AST and ALT increased significantly, especially patients group over BMI 25 within normal liver function. This study was not founded correlation between decreased muscle mass and increased liver function test. ALP, BUN, Total-cholesterol, and triglyceride decreased significantly. Creatinine increased significantly, but within normal limit. Sodium was not changed significantly, potassium decreased significantly but within normal limit. Conclusions : These results suggest that modified fasting therapy will be beneficial if several measures complement.

• Journal of Korean Society for Quality Management
• /
• v.44 no.1
• /
• pp.167-180
• /
• 2016

Purpose: The problem for the traditional control chart is that it is unable to monitor the very small fraction of nonconforming and the underlying distribution is the normal distribution. $Z_p$ control chart is useful where it controls the vert small fraction on nonconforming. In this study, we will design the $Z_p$ control chart in order to use under non-normal process. Methods: $Z_p$ is calculated not by failure rate based on attribute data but using variable data. Control limit for non-normal $Z_p$ control chart is designed based on ${\alpha}$-risk calculated by cumulative distribution function of Burr distribution. ${\beta}$-risk, which is for performance evaluation, obtains in the Burr distribution's cumulative distribution function and control limit. Results: The control limit for non-normal $Z_p$ control chart is designed based on Burr distribution. The sensitivity can be checked through ARL table and OC curve. Conclusion: Non-normal $Z_p$ control chart is able to control not only the very small fraction of nonconforming, but it is also useful when $Z_p$ distribution is non-normal distribution.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.76-85
• /
• 1999

The intuitive understanding of the dynamic pattern generation in asymmetric networks may be useful for developing models of dynamic information processing. In this paper, dynamic behavior of the cyclic connection neural network, in which each neuron is connected only to its nearest neurons with binary synaptic weights of $\pm$ 1, has been investigated. Simulation results show that dynamic behavior of the network can be classified into only three categories: fixed points, limit cycles with basin and limit cycles with no basin. Furthermore, the number and the type of limit cycles generated by the networks have been derived through analytical method. The sufficient conditions for a state vector of $n$-neuron network to produce a limit cycle of $n$- or 2$n$-period are also given. The results show that the estimated number of limit cycles is an exponential function of $n$. On the basis of this study, cyclic connection neural network may be capable of storing a large number of dynamic information.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.158-166
• /
• 2008

Member force, strain and stress distribution of a section are obtained for prestressed steel and concrete(PSSC) composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for deflection, stress and flexural strength. Comparing that the reliability index for stress is near 0 for example section which is designed to satisfy the allowable stress exactly, the reliability indexes for deflection and flexural strength are high. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for deflection and flexural strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.214-224
• /
• 2008

Member force, strain and stress distribution of a section are obtained for optimized standard 25m~45m PSSC composite bridge subjected to dead and live load in order to interpret the effect of prestressing and deformation of tendon. The stress and strain distribution and moment capacity are obtained for both noncomposite and composite section and for allowable stress limit state, yield limit state and strength limit state. Reliability analysis is conducted after assuming limit states for stress and flexural strength. The reliability index for standard PSSC composite bridge which is designed to satisfy the allowable stress for flexural strength are higher than 3.5 which is required reliability indexes on American code for LRFD. Reliability of PSSC girder which is designed based on allowable stress of bridge design code is high for flexural strength.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.1
• /
• pp.68-76
• /
• 1999

The intuitive understanding of the dynamic pattern generation in asymmetric networks may be useful for developing models of dynamic information processing. In this paper, dynamic behavior of the ring connection neural network in which each neuron is only to its nearest neurons with binary synaptic weights of ±1, has been inconnected vestigated Simulation results show that dynamic behavior of the network can be classified into only three categories: fixed points, limit cycles with basin and limit cycles with no basin. Furthermore, the number and the type of limit cycles generated by the networks have been derived through analytical method. The sufficient conditions for a state vector of n-neuron network to produce a limit cycle of n- or 2n-period are also given The results show that the estimated number of limit cycle is an exponential function of n. On the basis of this study, cyclic connection neural network may be capable of storing a large number of dynamic information.

• Journal of Radiation Protection and Research
• /
• v.48 no.3
• /
• pp.131-143
• /
• 2023

Background: This study examined the detection limit of thyroid screening monitoring conducted at the time of the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident in 2011 using a Monte Carlo simulation. Materials and Methods: We calculated the detection limit of a NaI(Tl) survey meter to measure ¹³¹I accumulation in the thyroid gland of children. Mathematical phantoms of 1- and 5-year-old children were developed in the simulation of the Particle and Heavy Ion Transport code System code. Contamination of the body surface with eight radionuclides found after the FDNPP accident was assumed to have been deposited on the neck and shoulder area. Results and Discussion: The detection limit was calculated as a function of ambient dose rate. In the case of 40 Bq/cm² contamination on the body surface of the neck, the present simulations showed that residual thyroid radioactivity corresponding to thyroid dose of 100 mSv can be detected within 21 days after intake at the ambient dose rate of 0.2 µSv/hr and within 11 days in the case of 2.0 µSv/hr. When a time constant of 10 seconds was used at the dose rate of 0.2 µSv/hr, the estimated survey meter output error was 5%. Evaluation of the effect of individual differences in the location of the thyroid gland confirmed that the measured value would decrease by approximately 6% for a height difference of ±1 cm and increase by approximately 65% for a depth of 1 cm. Conclusion: In the event of a nuclear disaster, simple measurements carried out using a NaI(Tl) scintillation survey meter remain effective for assessing ¹³¹I intake. However, it should be noted that the presence of short-half-life radioactive materials on the body surface affects the detection limit.

• The Journal of Internal Korean Medicine
• /
• v.22 no.4
• /
• pp.547-555
• /
• 2001

Objectives: Obesity is regarded as the aggregation of needless risk factors, for instance, cardiovascular disease, joint disease, induce cancer. We studied on interrelation between abnormal liver function and obesity. Methods: We analyzed liver function, T.Cholesterol, Triglyceride before and after lose weight treatment. The collateral condition is over 6 weeks period on obesity treatment, no liver injury and no complicated another disease on personal past history and found out abnormal impression on biochemical liver function blood test. Results: The improvement rate of LFT, compare with before treatment is 10.6% in T.Bilirubin, 11.1% in ALP, 21% in AST, 38% in ALT, 37.3% in r-GTP, 9.2% in LDH and decreased 2.7% in T.Protein, increased 2.3% in Albumin. Hyperlipidemia is 19.4% in T.Cholesterol, 42.5% in Triglyceride. Conclusions: LFT and Hyperlipidemia of abnormal liver function patients, caused by obesity, is improved to normal limit in proportion to reduce patient's weight.