• Journal of Food Hygiene and Safety
• /
• v.25 no.1
• /
• pp.36-42
• /
• 2010

The method for the determination of ethylenediamine (EDA) and hexamethylenediamine (HMDA) in food simulants was developed, and migration amounts of these compounds was monitored for 124 polyamide (PA) utensils. The diurethane derivatives of EDA and HMDA, which produced by reaction with ethyl chloroformate, were analyzed by using gas chromatograph (GC)/flame ionization detector (FID) and GC/mass spectrometer (MS). The developed method was validated with $0.3\;{\mu}g/mL$ of limit of detection (LOD) for EDA and $0.1\;{\mu}g/mL$ of LOD for HMDA, > 0.999 of linearity($r^2$) and > 88% of recovery. The EDA was detected 1.31 and $02.06\;{\mu}g/mL$ for 2 samples in water. The HMDA was detected $0.29\;-\;0.93\;{\mu}g/mL$ for 3 samples in 20% ethanol and $0.26\;-\;0.44\;{\mu}g/mL$ for 10 samples in n-heptane. These migration levels were below the specific migration limits (SML) of $12\;{\mu}g/mL$ and $2.4\;{\mu}g/mL$ for EDA and HMDA established in EU.

• Journal of Food Hygiene and Safety
• /
• v.35 no.5
• /
• pp.438-446
• /
• 2020

Meju and nuruk (respectively soybean and malt) are traditional Korean fermentation starters that are vulnerable to contamination by harmful microorganisms such as aflatoxigenic fungi and their associated aflatoxins (AFs). In this study, Aspergillus spp. were isolated and identified from a total of 57 meju and 18 nuruk samples collected from Korean markets. Their potential aflatoxigenicity was investigated by examining the presence of three aflatoxin biosynthetic genes (aflO, aflP, and aflR) using multiplex polymerase chain reaction (mPCR) assays. Thereafter, aflatoxin production of isolates and the natural occurrence of AFs in meju and nuruk samples were analyzed by high-performance liquid chromatography (HPLC). A total of 177 Aspergillus isolates were identified and 130 isolates were obtained from meju samples. Of these, 25 isolates (19.2%) contained all three aflatoxin biosynthetic genes, and five (20%) of these isolates produced aflatoxins. Forty-seven of the Aspergillus isolates were obtained from nuruk samples, five of which (10.6%) expressed all three AF biosynthetic genes; however, none of these strains produced AFs. HPLC analysis showed that 88% (51/58) of the meju samples and 39% (7/18) of nuruk samples were not contaminated with AFs (below limit of detection). Among the isolates isolated from meju and nuruk, there were aflatoxigenic strains containing all three aflatoxin biosynthetic genes or producing aflatoxin in medium, but the frequency of aflatoxin contamination was low in the meju and nuruk samples.

• Korean Journal of Food Science and Technology
• /
• v.44 no.3
• /
• pp.263-268
• /
• 2012

Novobiocin is a coumarin-containing antibiotic, and has a longer half-life in various animals than other veterinary medicines. A simple and rapid high-performance liquid chromatography assay for the determination of residual novobiocin levels in chicken, beef and milk has been developed and validated. The separation condition for HPLC/UVD was optimized by a MG II $C_{18}$ (4.6 mm $ID{\times}250$ mm, 5 ${\mu}m$) column with 0.1% formic acid in $H_2O$/0.1% formic acid in Acetonitrile (40/60, v/v) as the mobile phase at a flow rate of 1.0 mL/min and the detection wavelength was set at 340 nm. Residues were extracted from tissue by blending with methanol. After liquid-liquid partitioning, lipid materials were removed with n-hexane and purification as Silica (1 g, 6 mL) cartridge with 10 mL acetone/dichloromethane (10/90, v/v). Limit of quantification and linearity performed by the analytical method were 0.02 mg/kg and 0.999 ($r^2$), and the recovery range was $88.8{\pm}5.6-100.3{\pm}4.4$, $88.8{\pm}7.2-97.0{\pm}3.2$ and $88.1{\pm}4.3-92.8{\pm}3.6%$. It is expected that this analytical method with regards to novobiocin in chicken, beef and milk could be applied as an official method to administer food safety on veterinary medicines.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2010

To revise the dithiocarbamates residue analysis method and survey the residues in agricultural products that were treated with these fungicides in Korea, we purchased 20 types of foodstuffs (rice, potato, cabbage, apple etc.) from markets in five major cities. 236 samples of the purchased foodstuffs were then analyzed for the presence of dithiocarbamates by HPLC/UV and HPLC/APCI-MS. The $R^2$, LOD and LOQ in the range of 0.5-107.3 mg/L were as follows: DCC: y=174.34x+18.315, $R^2=0.9999$, 0.01 mg/L, and 0.04 mg/L; EBDC: y=227.38x-14.715, $R^2=1.0000$, 0.01 mg/L and 0.02 mg/L; PBDC: y=38.46x-21.412, $R^2=0.9999$, 0.04 mg/L, and 0.1 mg/L; ETU: y=52.752x-4.4819, $R^2=0.9998$, 0.02 mg/L and 0.03 mg/L; PTU: y=128.28x+4.4624, $R^2=0.9998$, 0.02 mg/L, and 0.04 mg/L. The levels of DDC, EBDC, PBDC, ETU and PTU in 20 agricultural products fortified to 10.0-107.3 mg/L ranged from 61.7-117.5%, 65.3-110.1%, 61.5-109.6%, 69.3-116.3% and 70.2-97.2%, respectively. Overall, dithiocarbamates were detected in 100 samples and the detection ratio was 42.4%. Among these, only 3 samples (1.3%) of Lycii fructus had residue levels that were above the action limits, while the remaining samples (233 samples) contained levels of dithiocarbamates below the detection limit or below the Korea MRLs (Maximum Residue Limits).

• Radiation Oncology Journal
• /
• v.24 no.3
• /
• pp.185-191
• /
• 2006

[ $\underline{Purpose}$ ]: Standardization quality assurance (QA) program of CyberKnife for suitable circumstances in Korea has not been established. In this research, we investigated the development of QA program for CyberKnife and evaluation of the feasibility under applications. $\underline{Materials\;and\;Methods}$: Considering the feature of constitution for systems and the therapeutic methodology of CyberKnife, the list of quality control (QC) was established and divided dependent on the each period of operations. And then all these developed QC lists were categorized into three groups such as basic QC, delivery specific QC, and patient specific QC based on the each purpose of QA. In order to verify the validity of the established QA program, this QC lists was applied to two CyberKnife centers. The acceptable tolerance was based on the undertaking inspection list from the CyberKnife manufacturer and the QC results during last three years of two CyberKnife centers in Korea. The acquired measurement results were evaluated for the analysis of the current QA status and the verification of the propriety for the developed QA program. $\underline{Results}$: The current QA status of two CyberKnife centers was evaluated from the accuracy of all measurements in relation with application of the established QA program. Each measurement result was verified having a good agreement within the acceptable tolerance limit of the developed QA program. $\underline{Conclusion}$: It is considered that the developed QA program in this research could be established the standardization of QC methods for CyberKnife and confirmed the accuracy and stability for the image-guided stereotactic radiotherapy.

• Clean Technology
• /
• v.18 no.2
• /
• pp.200-208
• /
• 2012

This study was performed to prevent the health damage of environmental contaminants in Industrial Complex Area. And, this study aimed to identify the concentration levels and distribution characteristics of environmental contaminants and Polycyclic Aromatic Hydrocarbons (PAHs) at soil in Industrial Complex Area and control area. The concentration of the soil pollution standard such as the heavy metals in the soil, VOCs, PAHs, and PCB were measured and analyzed using the soil specimens in the Industrial Complex Area and control area. Soil specimens from the Industrial Complex Area (the direct exposure area) and the control area were surveyed. Songdo-dong, Haedo-dong and Jechul-dong, which are in the direct exposure area and near the emission source, showed relatively high concentrations of contaminant materials when compared with Jangki-myeon, which is far off and in the control area. The concentration of zinc was 20.8-58.9% of the level of concern (300 mg/kg) in the 1st region, which is a relatively high concentration. The concentration of fluoride was under the standard in every region, but it was about 74% of the level of concern (400 mg/kg) in the 1st region. It is recommended that controlling fluoride emissions is necessary. Levels of organic phosphate, phenol, and VOCs like benzene, toluene, ethylbenzene and xylene were under the detection limit of the analysis instruments. The concentration of TPH was high in Songdo-dong. The concentration of contaminants in Jechul-dong was high. In addition, it was observed that the level of soil contamination changed depending on the distance from the emission source. The concentration of PAH compounds in the soil was 18.71-1744.59 ng/g, and the concentration of six potential cancer-causing PAH materials was 6.54-695.94 ng/g. The highest concentration was in Songdo-dong. The PAH concentration in the direct exposure area near the complex was relatively high compared to the indirect exposure area.

• The Korean Journal of Pesticide Science
• /
• v.11 no.2
• /
• pp.106-116
• /
• 2007

Pesticide, chlorfluazuron was subjected to determine the safety of terminal residues at the harvesting date of perilla leaves cultivated in plastic house. After the pesticide applied on a foliar spray in 2005 and 2006, leaf persistence of its residue was analysed for 10 days before leaf harvest. The degradation rate of chlorfluazuron in the leaf was 32.3 %(standard application), 43.6 %(double application) and 78.0 %(standard), 80.4 %(double) at second and tenth day, respectively, under analysis of GC/ECD in 2005. The degradation rate of chlorfluazuron in the leaf was 33.1 %(GC/ECD analyze), 34.0 %(HPLC/UVD analyze) and 77.9 %(GC/ECD), 78.4 %(HPLC/UVD) at second and tenth day, respectively, under the standard level of pesticide in 2006. The biological half-life of the chlorfluazuron residue was estimated by the regression equation calculated from daily dissipation of pesticide in the perilla leaves. The longest half-life of the chlorfluazuron residue in perilla leaves was 5.5 days. The maximum residual limit(MRL) for chlorfluazuron based on the longest half-life was estimated 2.0ppm at harvesting day, 2.5ppm at second day and 7.1ppm at tenth day before leaf harvesting of perilla.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1016-1023
• /
• 2006

The water content of dewatered cake produced from belt press dewatering equipment was about 75 wt% which was some high to handle it, so the equipment contained a limit at the economical and environmental aspect. The thermal dewatering equipment built as an alternative to overcome several problems was set up at the sludge treatment field and estimated some feasibility as comparison with the dewatering performance of belt press. First, dewatering properties of waterworks sludge was analyzed by monthly. The sludge of a water shortage season contained a high organic content which led to be difficult to dewater the cake, the other side the sludge of rainwater season was ease to dewater because of low organic content. According to the results to analysis the water content of dewatered cake produced from two equipments on the base of the seasonal dewatering properties, the water content of dewatered cake produced from thermal dewatering for sludge of water shortage season was $41.6{\sim}48.3$ wt% and $71{\sim}84$ wt% from belt press. In the case of rainwater season, the water content of dewatered cake produced from thermal dewatering was $34{\sim}37.7$ wt% and $57{\sim}70$ wt% from belt press. It was understood that thereduction of water content of cake by thermal dewatering was larger than belt press. The economical aspect for two equipments was evaluated on considering the reduction of cake treatment amount as the decrease of water content of cake. When putting the cost index of thermal dewatering into 100, belt press was 121. This meant that thermal dewater was more economical than belt press by about 20% in the side of construction and operation. In conclusion, thermal dewatering equipment was estimated by producing the low water content dewatered cake as well as being operated with low coat.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.185-193
• /
• 2015

Ultra high performance concrete (UHPC) has been developed to overcome the low tensile strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.252-260
• /
• 2015

This paper describes the technical background for the Korean wildlife radiation dose assessment code, K-BIOTA, and the summary of its application. The K-BIOTA applies the graded approaches of 3 levels including the screening assessment (Level 1 & 2), and the detailed assessment based on the site specific data (Level 3). The screening level assessment is a preliminary step to determine whether the detailed assessment is needed, and calculates the dose rate for the grouped organisms, rather than an individual biota. In the Level 1 assessment, the risk quotient (RQ) is calculated by comparing the actual media concentration with the environmental media concentration limit (EMCL) derived from a bench-mark screening reference dose rate. If RQ for the Level 1 assessment is less than 1, it can be determined that the ecosystem would maintain its integrity, and the assessment is terminated. If the RQ is greater than 1, the Level 2 assessment, which calculates RQ using the average value of the concentration ratio (CR) and equilibrium distribution coefficient (Kd) for the grouped organisms, is carried out for the more realistic assessment. Thus, the Level 2 assessment is less conservative than the Level 1 assessment. If RQ for the Level 2 assessment is less than 1, it can be determined that the ecosystem would maintain its integrity, and the assessment is terminated. If the RQ is greater than 1, the Level 3 assessment is performed for the detailed assessment. In the Level 3 assessment, the radiation dose for the representative organism of a site is calculated by using the site specific data of occupancy factor, CR and Kd. In addition, the K-BIOTA allows the uncertainty analysis of the dose rate on CR, Kd and environmental medium concentration among input parameters optionally in the Level 3 assessment. The four probability density functions of normal, lognormal, uniform and exponential distribution can be applied.The applicability of the code was tested through the participation of IAEA EMRAS II (Environmental Modeling for Radiation Safety) for the comparison study of environmental models comparison, and as the result, it was proved that the K-BIOTA would be very useful to assess the radiation risk of the wildlife living in the various contaminated environment.