• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.3
• /
• pp.77-91
• /
• 2015

This study aims to suggest adequate soil management through the analysis of physicochemical properties of soil in the planting grounds of Incheon International Airport, which was constructed on a massive land reclamation site. Study areas were 5 sites at the international business complex, the passenger terminal, the airport support complex, the free trade zone, and the access road. Soil profile analysis showed that 9 plots out of the 27 plots were hardpan and heterospere within 80cm from the soil surface. The earth laid on the ground was categorized as gravel based soil(4 plots), dredged soil from the sea bottom and mixed reclamation materials(2 plots), clay with poor permeability(3 plots) and waste construction material(1 plot). Average soil hardness was $11.5kg/cm^2$ and soil textures were sandy soil, sandy loam and loamy sand. Average soil pH was 6.7 and average organic matter content was 0.7%. Electrical conductivity was 0.0dS/m and exchangeable cation concentrations were $Ca^{2+}$ 3.4cmol/kg, $Mg^{2+}$ 1.5cmol/kg, $K^+$ 0.3cmol/kg and $Na^+$ 1.0cmol/kg. Average cation exchange capacity was 11.0cmol/kg. Although average figures in Solum mostly meet the landscape design criteria, properties of each soil layer showed various values sometimes over the limit. Base saturations were $Ca^{2+}$ 29.9%, $Mg^{2+}$ 13.3% and $K^+$ 3.7% for lower soil, $Ca^{2+}$ 33.3%, $Mg^{2+}$ 17.0% and $K^+$ 2.7% for mid-soil and $Ca^{2+}$ 32.6%, $Mg^{2+}$ 12.2% and $K^+$ 1.9% for upper soil. Exchangeable sodium percentages were 16.4% for lower soil, 7.5% for mid-soil and 4.7% upper soil. Sodium adsorption rates were 0.8 for lower soil, 0.3 for mid-soil and 0.2 for upper soil. Factors affecting to the vegetation growth were heterogeneity and poorness of solum, disturbance of dredged soils, high soil hardness including hardpan in the subsurface soil layer and shallow effective soil depth, high soil acidity, imbalance of base contents, low organic matter content and low available phosphate levels in the soil.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.210-217
• /
• 2015

Ipfencarbazone is a herbicide of the tetrazolinone class, and is believed to be an inhibitor of very long chain fatty acids (VLCFAs), which control cell division in weeds. The objective of this study was to develop and validate an official analytical method for ipfencarbazone determination in agricultural products. The ipfencarbazone residues in agricultural products were extracted with acetone, partitioned with n-hexane, and then purified through silica SPE cartridge. Finally, the analyte was quantified by gas chromatograph-electron capture detector (GC-ECD) and confirmed with gas chromatograph/mass spectrometer(GC/MS). The linear range of ipfencarbazone was 0.01 to 1.0 mg/L with the coefficient of determination ($r^2$) of 0.9999. The limit of detection (LOD) and quantification (LOQ) was 0.003 and 0.01 mg/kg, respectively. In addition, average recoveries of ipfencarbazone ranged from 80.6% to 112.3% at the different concentration levels LOQ, 10LOQ and 50LOQ, while the relative standard deviation was 2.2-8.6%. All values were consistent with the criteria ranges requested in the CODEX guidelines. Furthermore, and inter-laboratory study was conducted to validate the method. This proposed method for determination of ipfencarbazone residues in agricultural products can be used as an official analytical method.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.2
• /
• pp.1-28
• /
• 2014

Private consulting firms that are currently participating in rural area development projects with a bottom-up approach are involved in nearly all areas of rural area development, and the policy environment that emphasizes the bottom-up approach will further expand their participation. Reviews of private consulting firms, which started out with high expectations in the beginning, are now becoming rather negative. Expertise is the key issue in the controversy over private consulting firms, and the analysis tends to limit the causes of the problems within firms. This study was conducted on the premise that the fixation on cause and structure results in policy issues in the promotion process. That is because the government authorities are responsible for managing and supervising the implementation of policies, not developing the policies. The current issues with consulting firms emerged because of the hasty implementation of private consulting through the government policy trend without sufficient consideration, as well as the policy environment that demanded short-term outcomes even though the purpose of bottom-up rural area development lies in the ideology of endogenous development focused on the changes in residents' perceptions. Research was conducted to determine how the problems of private consulting firms that emerged and were addressed in this context influenced the consulting market, using current data and based on the firms' business performance. In analyzing the types, firms were divided into three groups: top performers including market leaders (9), excellent performers (36), and average performers (34). An analysis of the correlation between the business performance of each type and managerial resources such as each firm's expertise revealed that there was only a correlation between human resources and regional development in excellent performers, and none was found with the other types. These results imply that external factors other than a firm's capabilities (e.g., expertise) play a significant role in the standards of selecting private consulting firms. Thus, government authorities must reflect on their error of hastily adopting private consulting firms without sufficient consideration and must urgently establish response measures.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.396-408
• /
• 1996

The purposes of this study were to standardise the forest working system to design the intensity of working system in felling operation of the thinning forest in our country as well as to contrive the improvement of working method and the increase of productivity. For the purpose of investigating these, element working was classified by felling operation in softwood thinning forest, and a pulse rate were measured and analyzed. The results were as follow : 1. From the analysis of the pulse frequence measurment, the average pulse showed 108 pulse per minute for worker A in the total of pure working time, 130 pulse per minutes for worker B, 119 pulse per minute for worker C and 125 pulse per minute for worker D, respectively. 2. From the results of the pulse frequence analysis according to element working classification, the highest pulse frequence represented 115 pulse per minute for worker A in the circumference, 131 pulse per minute for worker B in the movement, 122 pulse per minute for worker C in the limbing operation and 128 pulse per minute for work D in hang-up. 3. If the original pulse frequence was 100% for workers, the working intensity showed as follow : worker A was 160%(original pulse frequence was 61=100%) for the total of the working intensity and 188% for the circumference among element working. Worker B was 220%(original pulse frequence was 57=100%) for the total of the working intensity and 229 for movement among element working. Worker C was 159%(original pulse frequence was 73=100%) for the total of the working intensity and 168% for limbing operation among the element working. Worker D was 156%(original pulse frequence was 70=100%) for the total of working intensity and 182% for hang-up among element working. 4. At the limit point of Labor performance rating, showing the total of working intensity, overtime pulse rate per minute was 30 for worker A, 207 for worker B, 14 for worker C and 67 for worker D. Worker B was highest in working intensity, and got physically a big load.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.201-210
• /
• 2017

BACKGROUND: The current study was to monitor of 9 veterinary antibiotics (ceftiofur, clopidol, florfenicol, sulfamethazine, sulfamethoxazole, sulfathiazole, tetracycline, tiamulin, and tylosin) in manure using liquid chromatography-tandem mass spectrometry (LC-MS/MS) in positive and negative electrospray ionization mode. METHODS AND RESULTS: Sample preparation was carried out using Mcllvaine buffer and citrate salts to adjust the pH of the sample followed by purification with dispersive solid phase extraction (d-SPE). Separation of analytes during LC-MS/MS analysis was conducted using an Eclipse Plus $C_{18}$ column and the mobile phase was in gradient mode with, 0.1% formic acid and 5 mM ammonium formate in methanol (A) and 0.1% formic acid and 5 mM ammonium formate in distilled water (B). The linearity of the matrix-matched calibrations of all tested antibiotics was good, with $R^2$ determination coefficients ${\geq}0.9920$. The limit of detection (LOD) and quantifications (LOQ) were $0.1-67.0{\mu}g/kg$ and $0.4-200.0{\mu}g/kg$, respectively. Analysis of 13 solid and liquid manure samples taken from the Republic of Korea revealed concentrations less than $0.7{\mu}g/kg$ for tiamulin, $1497.6{\mu}g/kg$ for sulfamethazine. CONCLUSION: To monitor 9 veterinary antibiotics from manure samples in 13 provincial areas throughout the Republic of Korea, an analytical method was developed. The developed method was fully validated and successfully applied for monitoring various veterinary antibiotics in manure samples.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.104-116
• /
• 2018

BACKGROUND: This experiment was conducted to establish a simultaneous analysis method for 7 kinds of herbicides in 3 different classes having similar physicochemical property as diphenyl ether(bifenox and oxyfluorfen), dinitroaniline (ethalfluralin and trifluralin), and chloroacetamide (metolachlor, pretilachlor, and thenylchlor) in crops using GC-ECD/MS. METHODS AND RESULTS: All the 7 pesticide residues were extracted with acetone from representative samples of five raw products which comprised apple, green pepper, Kimchi cabbage, hulled rice and soybean. The extract was diluted with saline water and directly partitioned into n-hexane/dichloromethane(80/20, v/v) to remove polar co-extractives in the aqueous phase. For the hulled rice and soybean samples, n-hexane/acetonitrile partition was additionally employed to remove non-polar lipids. The extract was finally purified by optimized Florisil column chromatography. The analytes were separated and quantitated by GLC with ECD using a DB-1 capillary column. Accuracy and precision of the proposed method was validated by the recovery experiment on every crop samples fortified with bifenox, ethalfluralin, metolachlor, oxyfluorfen, pretilachlor, thenylchlor, and trifluralin at 3 concentration levels per crop in each triplication. CONCLUSION: Mean recoveries of the 7 pesticide residues ranged from 75.7 to 114.8% in five representative agricultural commodities. The coefficients of variation were all less than 10%, irrespective of sample types and fortification levels. Limit of quantitation (LOQ) of the analytes were 0.004 (etahlfluralin and trifluralin), 0.008 (metolachlor and pretilachlor), 0.006 (thenylchlor), 0.002 (oxyfluorfen), and 0.02 (bifenox) mg/kg as verified by the recovery experiment. A confirmatory technique using GC/MS with selected-ion monitoring was also provided to clearly identify the suspected residues. Therefore, this analytical method was reproducible and sensitive enough to determine the residues of bifenox, ethalfluralin, metolachlor, oxyfluorfen, pretilachlor, thenylchlor, and trifluralin in agricultural commodities.

• Radiation Oncology Journal
• /
• v.13 no.1
• /
• pp.9-18
• /
• 1995

Purpose : A retrospective analysis was performed to investigate the proper management of maxillary sinus carcinoma. Materials and Methods : Authors analysed 33 patients of squamous cell carcinoma of maxillary sinus treated at Chonnam University Hospital from January 1986 to December 1992. There were 24 men and 9 women with median age of 55 years. According to AJCC TNM system of 1988, a patient of T2, 10 patients of T3 and 22 patients of T4 were availalbe, respectively. Cervical lymph node metastases was observed in 5 patients(N 1;4/33, N2b; 1/33). Patients were classified as 3 groups according to management method. The first group, named as 'FAR' (16 patients), was consisted or preoperative intra-arterial chemotherapy with 5-fluorouracil(5-FU;mean of total dosage;3078mg) through the superficial temporal artery with concurrent radiation(mean dose delivered:3433cGy, daily 180-200cGy) and vitamin A(50,000 IU daily), and followed by total maxillectomy and postoperative radiation therapy(mean dose;2351cGy). The second group, named as 'SR'(7 patients), was consisted of total maxillectomy followed by postoperative radiation therapy(mean dose 5920 cGy). The third group, named as 'R'(6 patients), was treated with radiation alone(mean dose;7164cGy). Kaplan-Meier product limit method was used for survival analysis and Mantel-Cox test was performed for significance of survival difference between two groups. Results : Local recurrence free survival rate in the end of 2 year was $100\%$, $50\%$ and $0\%$ in FAR, SR and R group, respectively. Disease free survival rate in 2 years was $88.9\%$, $28.0\%$ and $0\%$ in FAR, SR and R group, respectively. Overall survival rate in 2 years was $88.9\%$, $40\%$ and $50\%$ in FAR, SR and R group, respectively. There were statistically significant difference between FAR and SR or FAR and R group in their local recurrence free, disease free and overall survial rates. But difference of each survival rate between SR and R group was not significant. Conclusion : In this study FAR group revealed better results than SR or R group. In the future prospective randomized study is in need.

• Journal of Radiation Protection and Research
• /
• v.26 no.2
• /
• pp.59-66
• /
• 2001

It is a hot issue to determine the spatial location and shape of tumor boundary in fractionated stereotactic radiotherapy (FSRT). We could get consecutive transaxial plane images from the phantom (paraffin) and 4 patients with brain tumor using helical computed tomography(HCT). K-means classification algorithm was adjusted to change raw data pixel value in CT images into classified average pixel value. The classified images consists of 5 regions that ate tumor region (TR), normal region (NR), combination region (CR), uncommitted region (UR) and artifact region (AR). The major concern was how to separate the normal region from tumor region in the combination area. Relative average deviation analysis was adjusted to alter average pixel values of 5 regions into 2 regions of normal and tumor region to define maximum point among average deviation pixel values. And then we drawn gross tumor volume (GTV) boundary by connecting maximum points in images using semi-automatic contour method by IDL(Interactive Data Language) program. The error limit of the ROI boundary in homogeneous phantom is estimated within ${\pm}1%$. In case of 4 patients, we could confirm that the tumor lesions described by physician and the lesions described automatically by the K-mean classification algorithm and relative average deviation analyses were similar. These methods can make uncertain boundary between normal and tumor region into clear boundary. Therefore it will be useful in the CT images-based treatment planning especially to use above procedure apply prescribed method when CT images intermittently fail to visualize tumor volume comparing to MRI images.

• Journal of Venture Innovation
• /
• v.1 no.1
• /
• pp.1-14
• /
• 2018

The 4th Industrial Revolution is making a big change for our company like the tsunami. The CPS system, which is represented by the digital age, is based on the data accumulated in the physical domain and is making business that was not imagined in the past through digital technology. As a result, the business model of the 4th Industrial Revolution era is different from the previous one. In this study, we analyze the trends and the issues of business innovation theory research. Then, the business innovation model of the digital age was compared with the previous period. Based on this, we have searched for a business model suitable for the 4th Industrial Revolution era. The existing business models have many difficulties to explain the model of the digital era. Even though more empirical research should be supported, Michael Porter's diamond model is most suitable for four cases of business models by applying them. Type A sharing outcome with customer is a model that pay differently according to the basis of customer performance. Type B Value Chain Digitalization model provides products and services to customers with faster and lower cost by digitalizing products, services and SCM. Type C Digital Platform is the model that brings the biggest ripple effect. It is a model that can secure profitability by creating new market by creating the sharing economy based on digital platform. Finally, Type D Sharing Resources is a model for building a competitive advantage model by collaborating with partners in related industries. This is the most effective way to complement each other's core competencies and their core competencies. Even though numerous Unicorn companies have differentiated digital competitiveness with many digital technologies in their respective industries in the 4th Industrial Revolution era, there is a limit to the number of pieces to be listed. In future research, it is necessary to identify the business model of the digital age through more specific empirical analysis. In addition, since digital business models may be different in each industry, it is also necessary to conduct comparative analysis between industries

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.273-282
• /
• 2011

This study established hazards which may cause risk to human at farm during cultivation stage of paprika. Samples of plants (paprika, leaf, stem), cultivation environments (water, soil), personal hygiene (hand, glove, clothes), work utensils (carpet, basket, box) and airborne bacteria were collected from three paprika farms (A, B, C) located in Western Gyeongnam, Korea. The collected samples were assessed for biological (sanitary indications and major foodborne pathogens), chemical (heavy metals, pesticide residues) and physical hazards. In biological hazards, total bacteria and coliform were detected at the levels of 1.9~6.6 and 0.0~4.610g CFU/g, leaf, mL, hand or 100 $cm^2$, while Escherichia coli was not detected in all samples. In major pathogens, only Bacillus cereus were detected at levels of ${\leq}$ 1.5 log CFU/g, mL, hand or 100 $cm^2$, while Staphylococuus aureus, Listeria monocytogenes, E. coli O157 and Salmonella spp. were not detected in all samples. Heavy metal and pesticide residue as chemical hazards were detected at levels below the regulation limit, physical hazard factors, such as insects, pieces of metal and glasses, were also found in paprika farms. Proper management is needed to prevent biological hazards due to cross-contamination while physical and chemical hazards were appropriate GAP criteria.